Re: [boost] [builds] broken
On Sun, Mar 5, 2017 at 11:43 AM, Rene Rivera <grafikrobot@gmail.com> wrote:
On Sun, Mar 5, 2017 at 11:34 AM, Tom Kent <lists@teeks99.com> wrote:
On Sun, Mar 5, 2017 at 9:03 AM, Rene Rivera <grafikrobot@gmail.com> wrote:
On Sun, Mar 5, 2017 at 6:49 AM, Tom Kent via Boost < boost@lists.boost.org> wrote:
On Thu, Mar 2, 2017 at 9:59 PM, Rene Rivera via Boost < boost@lists.boost.org
wrote:
On Thu, Mar 2, 2017 at 9:52 AM, Raffi Enficiaud via Boost < boost@lists.boost.org> wrote:
Le 02/03/2017 à 16:25, Rene Rivera via Boost a écrit :
> On Thu, Mar 2, 2017 at 9:22 AM, Raffi Enficiaud via Boost < > boost@lists.boost.org> wrote: > > Le 02/03/2017 à 16:20, Rene Rivera via Boost a écrit : >> >> On Wed, Mar 1, 2017 at 5:23 PM, Raffi Enficiaud via Boost < >>> boost@lists.boost.org> wrote: >>> >>> Hi all, >>> >>>> >>>> On develop, I have the following error for gcc/linux and clang/osx: >>>> >>>> 01-Mar-2017 23:58:05 libs/python/build/Jamfile:155: in >>>> lib_boost_numpy >>>> 01-Mar-2017 23:58:05 *** argument error >>>> 01-Mar-2017 23:58:05 * rule lib ( names + : sources * : >>>> requirements * >>>> : default-build * : usage-requirements * ) >>>> 01-Mar-2017 23:58:05 * called with: ( : numpy/dtype.cpp >>>> numpy/matrix.cpp >>>> >>>> >>> >>> How are you configuring python in your user-config.jam? >>> >>> >> I am not touching anything about user-config.jam: the failure happens on >> a >> build machine (specific build user, supposedly clean). If there is a >> user-config.jam, then I do not know how it landed there :) >> > > > OK.. Which means that the version number for whatever python it picks up > is > undetermined and blank. I'll have to figure out why that is. >
FYI: the Linux/OSX machines have the apt/OS python installed, and python3.4.
OK.. It turns out to have been a simple forgetting of some parens. Note that bootstrap generates a project-config.jam file. So you do have one. You just don't see what it is :-) But it does print out in the CI logs what it detects as far as Python is concerned. Anyway.. It's fixed. And will be reflected whenever stuff updates to latest develop.
I think this is related, but not sure...all the regression runs I start (Linux + Windows) are currently failing with:
boost-test(COMPILE) "python/select_holder" : "libs/python/test/select_holder.cpp" boost-test(RUN) "python/select_from_python_test" : "libs/python/test/select_from_python_test.cpp" "libs/python/src/conve rter/type_id.cpp" boost-test(COMPILE) "python/select_arg_to_python_test" : "libs/python/test/select_arg_to_python_test.cpp" boost-test(COMPILE_FAIL) "python/raw_pyobject_fail1" : "libs/python/test/raw_pyobject_fail1.cpp" boost-test(COMPILE_FAIL) "python/raw_pyobject_fail2" : "libs/python/test/raw_pyobject_fail2.cpp" boost-test(COMPILE_FAIL) "python/as_to_python_function" : "libs/python/test/as_to_python_function.cpp" boost-test(COMPILE_FAIL) "python/object_fail1" : "libs/python/test/object_fail1.cpp" error: at /var/boost/run/boost_bb/src/kernel/modules.jam:107 error: Unable to find file or target named error: '/boost/python//boost_numpy' error: referred to from project at error: '../libs/python/test'
at the end of the results/bjam.log file. This was causing develop to fail for awhile, and now appears to have migrated to master as well.
OK, I'm almost certain I fixed both develop and master for this now. Thanks for reporting it.
Hmm, doesn't seem to have fixed it, still seeing the same error.
Hm.. Is python configured on the runners?
"/var/boost/run/results/bjam.log" 2>&1)... # Running Boost.Build tests Traceback (most recent call last): File "run.py", line 71, in <module> runner(root) File "/var/boost/run/boost_regression_src/regression.py", line 287, in __init__ self.main() File "/var/boost/run/boost_regression_src/regression.py", line 624, in
Yeah, the specific runner I'm looking at at the moment has python, both 2 (2.7.6) and 3 (3.4.3, despite what the summary page says under the python versions): http://www.boost.org/development/tests/develop/developer/summary.html If you want to try that config yourself, you can get it from docker hub: teeks99/boost-build:gcc-6 I verified that it was getting the latest commit from develop: 6abf48add87c66a7b118d0bc5e24ae045ba6fbb0 Also, I noticed that there are two errors. The end of the output looks like: warning: toolset gcc initialization: can not find tool windres warning: initialized from /home/boost/user-config.jam:11 notice: using rc compiler :: <toolset>gcc-6~c++1z~warn :: /usr/bin/as notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "2.7" notice: [python-cfg] user-specified includes: "/usr/include/python2.7" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python2.7"... notice: [python-cfg] running command 'python2.7 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python2.7" notice: [python-cfg] include path: "/usr/include/python2.7" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named numpy notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "3.4" notice: [python-cfg] user-specified includes: "/usr/include/python3.4" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python3.4"... notice: [python-cfg] running command 'python3.4 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named 'numpy' notice: [zlib] Using pre-installed library notice: [zlib] Condition notice: [bzip2] Using pre-installed library notice: [bzip2] Condition Performing configuration checks - 32-bit : no - 64-bit : yes - arm : no - mips1 : no - power : no - sparc : no - x86 : yes - symlinks supported : yes ...found 1067 targets... # Starting tests ("/var/boost/run/boost_bb/src/engine/bin.linuxx86_64/b2" "-sBOOST_BUILD_PATH=/var/boost/run:/var/boost/ run/boost_bb/src" "-sBOOST_ROOT=/var/boost/run/boost_root" "--boost=/var/boost/run/boost_root" "--boost-root=/var/boost/ run/boost_root" "--boost-build=/var/boost/run/boost_bb/src" "--debug-configuration" -l300 toolset=gcc-6~c++1z -d2 prese rve-test-targets=off --dump-tests -j8 address-model=64 --remove-test-targets -m64 "--build-dir=/var/boost/run/results" > main getattr(self,action_m)() File "/var/boost/run/boost_regression_src/regression.py", line 589, in command_regression self.command_test() File "/var/boost/run/boost_regression_src/regression.py", line 368, in command_test self.command_test_boost_build() File "/var/boost/run/boost_regression_src/regression.py", line 410, in command_test_boost_build "boost/bin.v2/libs/any/test/any_test.test")); OSError: [Errno 2] No such file or directory: '/var/boost/run/results/boost/bin.v2/libs/any/test/any_test.test' While the end of the results/bjam.log is: boost-test(RUN) "ptr_container/const_element_containers" : "libs/ptr_container/test/const_element_containers.cpp" boost-test(RUN_PYD) "ptr_container/__boost_check_library__" : "status/boost_check_library.py" boost-test(RUN) "python/exec" : "libs/python/test/exec.cpp" boost-test(RUN) "python/exec-dynamic" : "libs/python/test/exec.cpp" boost-test(RUN_PYD) "python/crossmod_exception" : "libs/python/test/crossmod_exception.py" "libs/python/test/crossmod_ex ception_a.cpp" "libs/python/test/crossmod_exception_b.cpp" boost-test(RUN_PYD) "python/injected" : "libs/python/test/injected.py" "libs/python/test/injected.cpp" boost-test(RUN_PYD) "python/properties" : "libs/python/test/properties.py" "libs/python/test/properties.cpp" boost-test(RUN_PYD) "python/return_arg" : "libs/python/test/return_arg.py" "libs/python/test/return_arg.cpp" boost-test(RUN_PYD) "python/staticmethod" : "libs/python/test/staticmethod.py" "libs/python/test/staticmethod.cpp" boost-test(RUN_PYD) "python/boost_shared_ptr" : "libs/python/test/boost_shared_ptr.py" "libs/python/test/boost_shared_pt r.cpp" boost-test(RUN_PYD) "python/shared_ptr" : "libs/python/test/shared_ptr.py" "libs/python/test/shared_ptr.cpp" boost-test(RUN_PYD) "python/enable_shared_from_this" : "libs/python/test/enable_shared_from_this.py" "libs/python/test/e nable_shared_from_this.cpp" boost-test(RUN_PYD) "python/andreas_beyer" : "libs/python/test/andreas_beyer.py" "libs/python/test/andreas_beyer.cpp" boost-test(RUN_PYD) "python/wrapper_held_type" : "libs/python/test/wrapper_held_type.py" "libs/python/test/wrapper_held_ type.cpp" boost-test(RUN_PYD) "python/polymorphism2_auto_ptr" : "libs/python/test/polymorphism2_auto_ptr.py" "libs/python/test/pol ymorphism2.py" "libs/python/test/polymorphism2_auto_ptr.cpp" boost-test(RUN_PYD) "python/polymorphism" : "libs/python/test/polymorphism.py" "libs/python/test/polymorphism.cpp" boost-test(RUN_PYD) "python/polymorphism2" : "libs/python/test/polymorphism2.py" "libs/python/test/polymorphism2.cpp" boost-test(RUN_PYD) "python/auto_ptr" : "libs/python/test/auto_ptr.py" "libs/python/test/auto_ptr.cpp" boost-test(RUN_PYD) "python/minimal" : "libs/python/test/minimal.py" "libs/python/test/minimal.cpp" boost-test(RUN_PYD) "python/args" : "libs/python/test/args.py" "libs/python/test/args.cpp" boost-test(RUN_PYD) "python/raw_ctor" : "libs/python/test/raw_ctor.py" "libs/python/test/raw_ctor.cpp" boost-test(RUN_PYD) "python/enum" : "libs/python/test/test_enum.py" "libs/python/test/enum_ext.cpp" boost-test(RUN_PYD) "python/exception_translator" : "libs/python/test/exception_translator.py" "libs/python/test/excepti on_translator.cpp" boost-test(RUN_PYD) "python/pearu1" : "libs/python/test/test_cltree.py" "libs/python/test/cltree.cpp" boost-test(RUN_PYD) "python/try" : "libs/python/test/newtest.py" "libs/python/test/m1.cpp" "libs/python/test/m2.cpp" boost-test(RUN_PYD) "python/const_argument" : "libs/python/test/const_argument.py" "libs/python/test/const_argument.cpp" boost-test(RUN_PYD) "python/keywords" : "libs/python/test/keywords.cpp" "libs/python/test/keywords_test.py" boost-test(RUN_PYD) "python/builtin_converters" : "libs/python/test/test_builtin_converters.py" boost-test(RUN_PYD) "python/test_pointer_adoption" : "libs/python/test/test_pointer_adoption.py" "libs/python/test/test_ pointer_adoption.cpp" boost-test(RUN_PYD) "python/operators" : "libs/python/test/operators.py" "libs/python/test/operators.cpp" boost-test(RUN_PYD) "python/operators_wrapper" : "libs/python/test/operators_wrapper.py" "libs/python/test/operators_wra pper.cpp" boost-test(RUN_PYD) "python/callbacks" : "libs/python/test/callbacks.py" "libs/python/test/callbacks.cpp" boost-test(RUN_PYD) "python/defaults" : "libs/python/test/defaults.py" "libs/python/test/defaults.cpp" boost-test(RUN_PYD) "python/object" : "libs/python/test/object.py" "libs/python/test/object.cpp" boost-test(RUN_PYD) "python/class" : "libs/python/test/class.py" "libs/python/test/class.cpp" boost-test(RUN_PYD) "python/list" : "libs/python/test/list.py" "libs/python/test/list.cpp" boost-test(RUN_PYD) "python/long" : "libs/python/test/long.py" "libs/python/test/long.cpp" boost-test(RUN_PYD) "python/dict" : "libs/python/test/dict.py" "libs/python/test/dict.cpp" boost-test(RUN_PYD) "python/tuple" : "libs/python/test/tuple.py" "libs/python/test/tuple.cpp" boost-test(RUN_PYD) "python/str" : "libs/python/test/str.py" "libs/python/test/str.cpp" boost-test(RUN_PYD) "python/slice" : "libs/python/test/slice.py" "libs/python/test/slice.cpp" boost-test(RUN_PYD) "python/virtual_functions" : "libs/python/test/virtual_functions.py" "libs/python/test/virtual_funct ions.cpp" boost-test(RUN_PYD) "python/back_reference" : "libs/python/test/back_reference.py" "libs/python/test/back_reference.cpp" boost-test(RUN_PYD) "python/implicit" : "libs/python/test/implicit.py" "libs/python/test/implicit.cpp" boost-test(RUN_PYD) "python/data_members" : "libs/python/test/data_members.py" "libs/python/test/data_members.cpp" boost-test(RUN_PYD) "python/ben_scott1" : "libs/python/test/ben_scott1.py" "libs/python/test/ben_scott1.cpp" boost-test(RUN_PYD) "python/bienstman1" : "libs/python/test/bienstman1.py" "libs/python/test/bienstman1.cpp" boost-test(RUN_PYD) "python/bienstman2" : "libs/python/test/bienstman2.py" "libs/python/test/bienstman2.cpp" boost-test(RUN_PYD) "python/bienstman3" : "libs/python/test/bienstman3.py" "libs/python/test/bienstman3.cpp" boost-test(RUN_PYD) "python/multi_arg_constructor" : "libs/python/test/multi_arg_constructor.py" "libs/python/test/multi _arg_constructor.cpp" oost-test(RUN_PYD) "python/iterator" : "libs/python/test/iterator.py" "libs/python/test/iterator.cpp" "libs/python/test /input_iterator.cpp" boost-test(RUN_PYD) "python/stl_iterator" : "libs/python/test/stl_iterator.py" "libs/python/test/stl_iterator.cpp" boost-test(RUN_PYD) "python/extract" : "libs/python/test/extract.py" "libs/python/test/extract.cpp" boost-test(RUN_PYD) "python/crossmod_opaque" : "libs/python/test/crossmod_opaque.py" "libs/python/test/crossmod_opaque_a .cpp" "libs/python/test/crossmod_opaque_b.cpp" boost-test(RUN_PYD) "python/opaque" : "libs/python/test/opaque.py" "libs/python/test/opaque.cpp" boost-test(RUN_PYD) "python/voidptr" : "libs/python/test/voidptr.py" "libs/python/test/voidptr.cpp" boost-test(RUN_PYD) "python/pickle1" : "libs/python/test/pickle1.py" "libs/python/test/pickle1.cpp" boost-test(RUN_PYD) "python/pickle2" : "libs/python/test/pickle2.py" "libs/python/test/pickle2.cpp" boost-test(RUN_PYD) "python/pickle3" : "libs/python/test/pickle3.py" "libs/python/test/pickle3.cpp" boost-test(RUN_PYD) "python/pickle4" : "libs/python/test/pickle4.py" "libs/python/test/pickle4.cpp" boost-test(RUN_PYD) "python/nested" : "libs/python/test/nested.py" "libs/python/test/nested.cpp" boost-test(RUN_PYD) "python/docstring" : "libs/python/test/docstring.py" "libs/python/test/docstring.cpp" boost-test(RUN_PYD) "python/pytype_function" : "libs/python/test/pytype_function.py" "libs/python/test/pytype_function.c pp" boost-test(RUN_PYD) "python/vector_indexing_suite" : "libs/python/test/vector_indexing_suite.py" "libs/python/test/vecto r_indexing_suite.cpp" boost-test(RUN_PYD) "python/pointer_vector" : "libs/python/test/pointer_vector.py" "libs/python/test/pointer_vector.cpp" boost-test(RUN_PYD) "python/map_indexing_suite" : "libs/python/test/map_indexing_suite.py" boost-test(RUN) "python/import_" : "libs/python/test/import_.cpp" boost-test(RUN_PYD) "python/calling_conventions" : "libs/python/test/calling_conventions.py" "libs/python/test/calling_c onventions.cpp" boost-test(RUN_PYD) "python/calling_conventions_mf" : "libs/python/test/calling_conventions_mf.py" "libs/python/test/cal ling_conventions_mf.cpp" boost-test(COMPILE) "python/indirect_traits_test" : "libs/python/test/indirect_traits_test.cpp" boost-test(RUN) "python/destroy_test" : "libs/python/test/destroy_test.cpp" boost-test(RUN) "python/pointer_type_id_test" : "libs/python/test/pointer_type_id_test.cpp" boost-test(RUN) "python/bases" : "libs/python/test/bases.cpp" boost-test(RUN) "python/if_else" : "libs/python/test/if_else.cpp" boost-test(RUN) "python/pointee" : "libs/python/test/pointee.cpp" boost-test(RUN) "python/result" : "libs/python/test/result.cpp" boost-test(COMPILE) "python/string_literal" : "libs/python/test/string_literal.cpp" boost-test(COMPILE) "python/borrowed" : "libs/python/test/borrowed.cpp" boost-test(COMPILE) "python/object_manager" : "libs/python/test/object_manager.cpp" boost-test(COMPILE) "python/copy_ctor_mutates_rhs" : "libs/python/test/copy_ctor_mutates_rhs.cpp" boost-test(RUN) "python/upcast" : "libs/python/test/upcast.cpp" boost-test(COMPILE) "python/select_holder" : "libs/python/test/select_holder.cpp" boost-test(RUN) "python/select_from_python_test" : "libs/python/test/select_from_python_test.cpp" "libs/python/src/conve rter/type_id.cpp" boost-test(COMPILE) "python/select_arg_to_python_test" : "libs/python/test/select_arg_to_python_test.cpp" boost-test(COMPILE_FAIL) "python/raw_pyobject_fail1" : "libs/python/test/raw_pyobject_fail1.cpp" boost-test(COMPILE_FAIL) "python/raw_pyobject_fail2" : "libs/python/test/raw_pyobject_fail2.cpp" boost-test(COMPILE_FAIL) "python/as_to_python_function" : "libs/python/test/as_to_python_function.cpp" boost-test(COMPILE_FAIL) "python/object_fail1" : "libs/python/test/object_fail1.cpp" error: at /var/boost/run/boost_bb/src/kernel/modules.jam:107 error: Unable to find file or target named error: '/boost/python//boost_numpy' error: referred to from project at error: '../libs/python/test' Hope that helps, Tom
On Sun, Mar 5, 2017 at 2:20 PM, Tom Kent <lists@teeks99.com> wrote:
Yeah, the specific runner I'm looking at at the moment has python, both 2 (2.7.6) and 3 (3.4.3, despite what the summary page says under the python versions): http://www.boost.org/development/tests/develop/developer/summary.html
If you want to try that config yourself, you can get it from docker hub: teeks99/boost-build:gcc-6
I verified that it was getting the latest commit from develop: 6abf48add87c66a7b118d0bc5e24ae045ba6fbb0
Also, I noticed that there are two errors. The end of the output looks like:
warning: toolset gcc initialization: can not find tool windres warning: initialized from /home/boost/user-config.jam:11 notice: using rc compiler :: <toolset>gcc-6~c++1z~warn :: /usr/bin/as notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "2.7" notice: [python-cfg] user-specified includes: "/usr/include/python2.7" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python2.7"... notice: [python-cfg] running command 'python2.7 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[ 1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python2.7" notice: [python-cfg] include path: "/usr/include/python2.7" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named numpy notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "3.4" notice: [python-cfg] user-specified includes: "/usr/include/python3.4" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python3.4"... notice: [python-cfg] running command 'python3.4 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[ 1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named 'numpy' notice: [zlib] Using pre-installed library notice: [zlib] Condition notice: [bzip2] Using pre-installed library notice: [bzip2] Condition Performing configuration checks
That very helpful :-)
"/var/boost/run/results/bjam.log" 2>&1)... # Running Boost.Build tests Traceback (most recent call last): File "run.py", line 71, in <module> runner(root) File "/var/boost/run/boost_regression_src/regression.py", line 287, in __init__ self.main() File "/var/boost/run/boost_regression_src/regression.py", line 624, in
- 32-bit : no - 64-bit : yes - arm : no - mips1 : no - power : no - sparc : no - x86 : yes - symlinks supported : yes ...found 1067 targets... # Starting tests ("/var/boost/run/boost_bb/src/engine/bin.linuxx86_64/b2" "-sBOOST_BUILD_PATH=/var/boost/run:/var/boost/ run/boost_bb/src" "-sBOOST_ROOT=/var/boost/run/boost_root" "--boost=/var/boost/run/boost_root" "--boost-root=/var/boost/ run/boost_root" "--boost-build=/var/boost/run/boost_bb/src" "--debug-configuration" -l300 toolset=gcc-6~c++1z -d2 prese rve-test-targets=off --dump-tests -j8 address-model=64 --remove-test-targets -m64 "--build-dir=/var/boost/run/results" > main getattr(self,action_m)() File "/var/boost/run/boost_regression_src/regression.py", line 589, in command_regression self.command_test() File "/var/boost/run/boost_regression_src/regression.py", line 368, in command_test self.command_test_boost_build() File "/var/boost/run/boost_regression_src/regression.py", line 410, in command_test_boost_build "boost/bin.v2/libs/any/test/any_test.test")); OSError: [Errno 2] No such file or directory: '/var/boost/run/results/boost/bin.v2/libs/any/test/any_test.test'
Interesting.. But unrelated AFAIK. The b2 tests rely on that any_test for a sanity check. So perhaps the test is gone and we need to use some other sanity check test. While the end of the results/bjam.log is:
error: Unable to find file or target named error: '/boost/python//boost_numpy' error: referred to from project at error: '../libs/python/test'
Hope that helps,
It does help. It's fixed now, as that target should always exist. -- -- Rene Rivera -- Grafik - Don't Assume Anything -- Robot Dreams - http://robot-dreams.net -- rrivera/acm.org (msn) - grafikrobot/aim,yahoo,skype,efnet,gmail
On Sun, Mar 5, 2017 at 3:20 PM, Rene Rivera <grafikrobot@gmail.com> wrote:
On Sun, Mar 5, 2017 at 2:20 PM, Tom Kent <lists@teeks99.com> wrote:
Yeah, the specific runner I'm looking at at the moment has python, both 2 (2.7.6) and 3 (3.4.3, despite what the summary page says under the python versions): http://www.boost.org/development/tests/develop/developer/summary.html
If you want to try that config yourself, you can get it from docker hub: teeks99/boost-build:gcc-6
I verified that it was getting the latest commit from develop: 6abf48add87c66a7b118d0bc5e24ae045ba6fbb0
Also, I noticed that there are two errors. The end of the output looks like:
warning: toolset gcc initialization: can not find tool windres warning: initialized from /home/boost/user-config.jam:11 notice: using rc compiler :: <toolset>gcc-6~c++1z~warn :: /usr/bin/as notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "2.7" notice: [python-cfg] user-specified includes: "/usr/include/python2.7" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python2.7"... notice: [python-cfg] running command 'python2.7 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[ 1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python2.7" notice: [python-cfg] include path: "/usr/include/python2.7" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named numpy notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "3.4" notice: [python-cfg] user-specified includes: "/usr/include/python3.4" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python3.4"... notice: [python-cfg] running command 'python3.4 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[ 1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named 'numpy' notice: [zlib] Using pre-installed library notice: [zlib] Condition notice: [bzip2] Using pre-installed library notice: [bzip2] Condition Performing configuration checks
That very helpful :-)
"/var/boost/run/results/bjam.log" 2>&1)... # Running Boost.Build tests Traceback (most recent call last): File "run.py", line 71, in <module> runner(root) File "/var/boost/run/boost_regression_src/regression.py", line 287, in __init__ self.main() File "/var/boost/run/boost_regression_src/regression.py", line 624, in
- 32-bit : no - 64-bit : yes - arm : no - mips1 : no - power : no - sparc : no - x86 : yes - symlinks supported : yes ...found 1067 targets... # Starting tests ("/var/boost/run/boost_bb/src/engine/bin.linuxx86_64/b2" "-sBOOST_BUILD_PATH=/var/boost/run:/var/boost/ run/boost_bb/src" "-sBOOST_ROOT=/var/boost/run/boost_root" "--boost=/var/boost/run/boost_root" "--boost-root=/var/boost/ run/boost_root" "--boost-build=/var/boost/run/boost_bb/src" "--debug-configuration" -l300 toolset=gcc-6~c++1z -d2 prese rve-test-targets=off --dump-tests -j8 address-model=64 --remove-test-targets -m64 "--build-dir=/var/boost/run/results" > main getattr(self,action_m)() File "/var/boost/run/boost_regression_src/regression.py", line 589, in command_regression self.command_test() File "/var/boost/run/boost_regression_src/regression.py", line 368, in command_test self.command_test_boost_build() File "/var/boost/run/boost_regression_src/regression.py", line 410, in command_test_boost_build "boost/bin.v2/libs/any/test/any_test.test")); OSError: [Errno 2] No such file or directory: '/var/boost/run/results/boost/bin.v2/libs/any/test/any_test.test'
Interesting.. But unrelated AFAIK. The b2 tests rely on that any_test for a sanity check. So perhaps the test is gone and we need to use some other sanity check test.
While the end of the results/bjam.log is:
error: Unable to find file or target named error: '/boost/python//boost_numpy' error: referred to from project at error: '../libs/python/test'
Hope that helps,
It does help. It's fixed now, as that target should always exist.
Things seem to be running again, thanks! I'll put adding numpy to some of my runners on my task list. Tom
Le 06/03/2017 à 13:19, Tom Kent via Boost a écrit :
On Sun, Mar 5, 2017 at 3:20 PM, Rene Rivera <grafikrobot@gmail.com> wrote:
On Sun, Mar 5, 2017 at 2:20 PM, Tom Kent <lists@teeks99.com> wrote:
Yeah, the specific runner I'm looking at at the moment has python, both 2 (2.7.6) and 3 (3.4.3, despite what the summary page says under the python versions): http://www.boost.org/development/tests/develop/developer/summary.html
If you want to try that config yourself, you can get it from docker hub: teeks99/boost-build:gcc-6
I verified that it was getting the latest commit from develop: 6abf48add87c66a7b118d0bc5e24ae045ba6fbb0
Also, I noticed that there are two errors. The end of the output looks like:
warning: toolset gcc initialization: can not find tool windres warning: initialized from /home/boost/user-config.jam:11 notice: using rc compiler :: <toolset>gcc-6~c++1z~warn :: /usr/bin/as notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "2.7" notice: [python-cfg] user-specified includes: "/usr/include/python2.7" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python2.7"... notice: [python-cfg] running command 'python2.7 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[ 1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python2.7" notice: [python-cfg] include path: "/usr/include/python2.7" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python2.7 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named numpy notice: [python-cfg] Configuring python... notice: [python-cfg] user-specified version: "3.4" notice: [python-cfg] user-specified includes: "/usr/include/python3.4" notice: [python-cfg] user-specified libraries: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking interpreter command "python3.4"... notice: [python-cfg] running command 'python3.4 -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexe c_prefix=%s\nexecutable=%s' % (version_info[0],version_info[ 1],platform,prefix,exec_prefix,executable))" 2>&1' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] ...requested configuration matched! notice: [python-cfg] Details of this Python configuration: notice: [python-cfg] interpreter command: "python3.4" notice: [python-cfg] include path: "/usr/include/python3.4" notice: [python-cfg] library path: "/usr/lib/x86_64-linux-gnu" notice: [python-cfg] Checking for NumPy... notice: [python-cfg] running command 'python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_i nclude())"' notice: [python-cfg] NumPy disabled. Reason: notice: [python-cfg] python3.4 -c "import sys; sys.stderr = sys.stdout; import numpy; print(numpy.get_include())" abor ted with notice: [python-cfg] Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named 'numpy' notice: [zlib] Using pre-installed library notice: [zlib] Condition notice: [bzip2] Using pre-installed library notice: [bzip2] Condition Performing configuration checks
That very helpful :-)
"/var/boost/run/results/bjam.log" 2>&1)... # Running Boost.Build tests Traceback (most recent call last): File "run.py", line 71, in <module> runner(root) File "/var/boost/run/boost_regression_src/regression.py", line 287, in __init__ self.main() File "/var/boost/run/boost_regression_src/regression.py", line 624, in
- 32-bit : no - 64-bit : yes - arm : no - mips1 : no - power : no - sparc : no - x86 : yes - symlinks supported : yes ...found 1067 targets... # Starting tests ("/var/boost/run/boost_bb/src/engine/bin.linuxx86_64/b2" "-sBOOST_BUILD_PATH=/var/boost/run:/var/boost/ run/boost_bb/src" "-sBOOST_ROOT=/var/boost/run/boost_root" "--boost=/var/boost/run/boost_root" "--boost-root=/var/boost/ run/boost_root" "--boost-build=/var/boost/run/boost_bb/src" "--debug-configuration" -l300 toolset=gcc-6~c++1z -d2 prese rve-test-targets=off --dump-tests -j8 address-model=64 --remove-test-targets -m64 "--build-dir=/var/boost/run/results" > main getattr(self,action_m)() File "/var/boost/run/boost_regression_src/regression.py", line 589, in command_regression self.command_test() File "/var/boost/run/boost_regression_src/regression.py", line 368, in command_test self.command_test_boost_build() File "/var/boost/run/boost_regression_src/regression.py", line 410, in command_test_boost_build "boost/bin.v2/libs/any/test/any_test.test")); OSError: [Errno 2] No such file or directory: '/var/boost/run/results/boost/bin.v2/libs/any/test/any_test.test'
Interesting.. But unrelated AFAIK. The b2 tests rely on that any_test for a sanity check. So perhaps the test is gone and we need to use some other sanity check test.
While the end of the results/bjam.log is:
error: Unable to find file or target named error: '/boost/python//boost_numpy' error: referred to from project at error: '../libs/python/test'
Hope that helps,
It does help. It's fixed now, as that target should always exist.
Things seem to be running again, thanks!
I'll put adding numpy to some of my runners on my task list.
Tom
On my side, nothing is working anymore: superproject revision 969fda57bb60b565fb9664ab8543d8b72268d561. Previous superprokect commit 6af98f38ae0b851b49e25d17936d2256ea88d35d was working fine. The error is 06-Mar-2017 14:37:10 D:\bamboo_build_dir\SW-BCB108-VC2015WIN\library>call bootstrap.bat 06-Mar-2017 14:37:10 Building Boost.Build engine 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 Bootstrapping is done. To build, run: 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 .\b2 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 To adjust configuration, edit 'project-config.jam'. 06-Mar-2017 14:37:59 Further information: 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 - Command line help: 06-Mar-2017 14:37:59 .\b2 --help 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 - Getting started guide: 06-Mar-2017 14:37:59 http://boost.org/more/getting_started/windows.html 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 - Boost.Build documentation: 06-Mar-2017 14:37:59 http://www.boost.org/build/doc/html/index.html 06-Mar-2017 14:38:02 libs\python\build\Jamfile:179: in modules.load 06-Mar-2017 14:38:02 *** argument error 06-Mar-2017 14:38:02 * rule lib_boost_numpy ( version ) 06-Mar-2017 14:38:02 * called with: ( ) 06-Mar-2017 14:38:02 * missing argument version 06-Mar-2017 14:38:02 libs\python\build\Jamfile:132:see definition of rule 'lib_boost_numpy' being called 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108-VC2015WIN/library/tools/build/src/build\project.jam:325: in load-jamfile 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108-VC2015WIN/library/tools/build/src/build\project.jam:64: in load 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108-VC2015WIN/library/tools/build/src/build\project.jam:89: in load-used-projects 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108-VC2015WIN/library/tools/build/src/build\project.jam:75: in load 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108-VC2015WIN/library/tools/build/src/build\project.jam:145: in project.find 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108-VC2015WIN/library/tools/build/src\build-system.jam:535: in load 06-Mar-2017 14:38:02 D:\bamboo_build_dir\SW-BCB108-VC2015WIN\library\tools\build\src/kernel\modules.jam:295: in import 06-Mar-2017 14:38:02 D:\bamboo_build_dir\SW-BCB108-VC2015WIN\library\tools\build\src/kernel/bootstrap.jam:139: in boost-build 06-Mar-2017 14:38:02 D:\bamboo_build_dir\SW-BCB108-VC2015WIN\library\boost-build.jam:17: in module scope Problems on all platforms I am testing: Win7/VS2008,2012,2013,2015 ; OSX/10.10/clang6, Ubuntu 14.04/gcc4.8.2 Thanks, Raffi
On Mon, Mar 6, 2017 at 7:53 AM, Raffi Enficiaud via Boost < boost@lists.boost.org> wrote:
On my side, nothing is working anymore: superproject revision 969fda57bb60b565fb9664ab8543d8b72268d561. Previous superprokect commit 6af98f38ae0b851b49e25d17936d2256ea88d35d was working fine.
The error is
06-Mar-2017 14:37:10 D:\bamboo_build_dir\SW-BCB108-VC2015WIN\library>call bootstrap.bat 06-Mar-2017 14:37:10 Building Boost.Build engine 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 Bootstrapping is done. To build, run: 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 .\b2 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 To adjust configuration, edit 'project-config.jam'. 06-Mar-2017 14:37:59 Further information: 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 - Command line help: 06-Mar-2017 14:37:59 .\b2 --help 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 - Getting started guide: 06-Mar-2017 14:37:59 http://boost.org/more/getting_ started/windows.html 06-Mar-2017 14:37:59 06-Mar-2017 14:37:59 - Boost.Build documentation: 06-Mar-2017 14:37:59 http://www.boost.org/build/doc/html/index.html 06-Mar-2017 14:38:02 libs\python\build\Jamfile:179: in modules.load 06-Mar-2017 14:38:02 *** argument error 06-Mar-2017 14:38:02 * rule lib_boost_numpy ( version ) 06-Mar-2017 14:38:02 * called with: ( ) 06-Mar-2017 14:38:02 * missing argument version 06-Mar-2017 14:38:02 libs\python\build\Jamfile:132:see definition of rule 'lib_boost_numpy' being called 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108- VC2015WIN/library/tools/build/src/build\project.jam:325: in load-jamfile 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108- VC2015WIN/library/tools/build/src/build\project.jam:64: in load 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108- VC2015WIN/library/tools/build/src/build\project.jam:89: in load-used-projects 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108- VC2015WIN/library/tools/build/src/build\project.jam:75: in load 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108- VC2015WIN/library/tools/build/src/build\project.jam:145: in project.find 06-Mar-2017 14:38:02 D:/bamboo_build_dir/SW-BCB108- VC2015WIN/library/tools/build/src\build-system.jam:535: in load 06-Mar-2017 14:38:02 D:\bamboo_build_dir\SW-BCB108- VC2015WIN\library\tools\build\src/kernel\modules.jam:295: in import 06-Mar-2017 14:38:02 D:\bamboo_build_dir\SW-BCB108- VC2015WIN\library\tools\build\src/kernel/bootstrap.jam:139: in boost-build 06-Mar-2017 14:38:02 D:\bamboo_build_dir\SW-BCB108- VC2015WIN\library\boost-build.jam:17: in module scope
Problems on all platforms I am testing: Win7/VS2008,2012,2013,2015 ; OSX/10.10/clang6, Ubuntu 14.04/gcc4.8.2
Can you post the output of running b2 with the --debug-configuration option? And if you have a user-config.jam or generated project-config.jam please post those also. -- -- Rene Rivera -- Grafik - Don't Assume Anything -- Robot Dreams - http://robot-dreams.net -- rrivera/acm.org (msn) - grafikrobot/aim,yahoo,skype,efnet,gmail
Le 06/03/2017 à 16:24, Rene Rivera via Boost a écrit :
On Mon, Mar 6, 2017 at 7:53 AM, Raffi Enficiaud via Boost < boost@lists.boost.org> wrote:
[snip]
Can you post the output of running b2 with the --debug-configuration option? And if you have a user-config.jam or generated project-config.jam please post those also.
Please find those attached to this post. Note also that I am actually not using those folders myself: this is an automated build folder. Please also note that I am not cleaning everything between 2 consecutive builds otherwise the clone time would dominate by far: I am only removing "bin.v2" and "boost" headers folders. Thanks, Raffi
On Mon, Mar 6, 2017 at 6:46 PM, Raffi Enficiaud via Boost <boost@lists.boost.org> wrote:
Le 06/03/2017 à 16:24, Rene Rivera via Boost a écrit :
On Mon, Mar 6, 2017 at 7:53 AM, Raffi Enficiaud via Boost < boost@lists.boost.org> wrote:
[snip]
Can you post the output of running b2 with the --debug-configuration option? And if you have a user-config.jam or generated project-config.jam please post those also.
Please find those attached to this post. Note also that I am actually not using those folders myself: this is an automated build folder. Please also note that I am not cleaning everything between 2 consecutive builds otherwise the clone time would dominate by far: I am only removing "bin.v2" and "boost" headers folders.
I think, you should also remove stage, if you want a clean state.
Le 06/03/2017 à 17:03, Andrey Semashev via Boost a écrit :
On Mon, Mar 6, 2017 at 6:46 PM, Raffi Enficiaud via Boost <boost@lists.boost.org> wrote:
Le 06/03/2017 à 16:24, Rene Rivera via Boost a écrit :
On Mon, Mar 6, 2017 at 7:53 AM, Raffi Enficiaud via Boost < boost@lists.boost.org> wrote:
[snip]
Can you post the output of running b2 with the --debug-configuration option? And if you have a user-config.jam or generated project-config.jam please post those also.
Please find those attached to this post. Note also that I am actually not using those folders myself: this is an automated build folder. Please also note that I am not cleaning everything between 2 consecutive builds otherwise the clone time would dominate by far: I am only removing "bin.v2" and "boost" headers folders.
I think, you should also remove stage, if you want a clean state.
Fine :) but it worked for the last 2+ years like this :)
On Mon, Mar 6, 2017 at 9:46 AM, Raffi Enficiaud via Boost < boost@lists.boost.org> wrote:
Le 06/03/2017 à 16:24, Rene Rivera via Boost a écrit :
On Mon, Mar 6, 2017 at 7:53 AM, Raffi Enficiaud via Boost < boost@lists.boost.org> wrote:
[snip]
Can you post the output of running b2 with the --debug-configuration option? And if you have a user-config.jam or generated project-config.jam please post those also.
Please find those attached to this post. Note also that I am actually not using those folders myself: this is an automated build folder. Please also note that I am not cleaning everything between 2 consecutive builds otherwise the clone time would dominate by far: I am only removing "bin.v2" and "boost" headers folders.
Should be fixed now, on both develop and master. -- -- Rene Rivera -- Grafik - Don't Assume Anything -- Robot Dreams - http://robot-dreams.net -- rrivera/acm.org (msn) - grafikrobot/aim,yahoo,skype,efnet,gmail
participants (4)
-
Andrey Semashev -
Raffi Enficiaud -
Rene Rivera -
Tom Kent