The Boost library config uses the check_target_builds rule to provide build time feature testing. Other Boost libraries use config checks in their own build and test jamfiles. I have found that this works reliably when a particular toolset is used in a normal manner. However when using the feature.subfeature and feature.compose rules to extend the toolset-version designation with a subfeature, such that the toolset designation now becomes toolset-version-subfeature, the use of the check_target_builds rule does not work as expected. In particular the individual check_target_builds rule results are put into a subdirectory based on the toolset-version and not based on the toolset-version-subfeature when toolset subfeature composition is used. I also suspect that the cached value reflects setup. This causes wrong results in tests where the toolset designation uses subfeatures, and a library's jamfile is using config and/or predef checks. As an example My toolset designation looks like: using gcc : 6.3 : some_path ; feature.subfeature toolset gcc : cxxstd : c03 c11 c14 c17 : optional composite propagated ; feature.compose <toolset-gcc:cxxstd>c03 : <cxxflags>-std=c++03 ; feature.compose <toolset-gcc:cxxstd>c11 : <cxxflags>-std=c++11 ; feature.compose <toolset-gcc:cxxstd>c14 : <cxxflags>-std=c++14 ; feature.compose <toolset-gcc:cxxstd>c17 : <cxxflags>-std=c++1z ; A library's test looks like: import ../../config/checks/config : requires ; run some_test.cpp : : : [ requires cxx11_hdr_forward_list ] ; If I run some some_test with toolset=gcc-6.3-c03, the config result for checking if forward list is supported is put into a subdirectory reflecting the toolset-version while the test result will be put into a subdirectory reflecting the toolset-version-subfeature. Subsequently if I run some_test with toolset=gcc-6.3-c11 the config result is taken from the subdirectory reflect the toolset-version even though whether the forward list is supported or not depends very much on the subfeature I am designating as part of the toolset. This naturally causes incorrect results for the test. Is this a known problem ? Is it a problem with Boost Build or is it a problem with how config uses the check_target_builds rule ? I have run into this problem extensively in my testing once I started to use the feature.subfeature ability of Boost Build.