- Boost - lists.preview.boost.org

[fibers] Great amount of errors and warnings raising out of valgrind
by Stephan Menzel 26 Mar '19

26 Mar '19

Hello all, I was just in the process of doing vagrind runs on a server process that recently switched to an architecture using boost fibers. Specifically buffered_channel as a number of worker fibers run in a thread. The process was regularily checked with valgrind before but now I'm getting overwhelmed by the amount of messages. Uninitialized values, invalid writes and reads all across the board and all seem to come out of fibers. I see no direct mention of my code. A few samples: ==8024== Thread 1: ==8024== Conditional jump or move depends on uninitialised value(s) ==8024== at 0x454F98: unique (circular_list_algorithms.hpp:112) ==8024== by 0x454F98: empty (list.hpp:540) ==8024== by 0x454F98: boost::fibers::buffered_channel<std::function<void ()> >::close() (buffered_channel.hp ==8024== by 0x454FDB: boost::fibers::buffered_channel<std::function<void ()> >::~buffered_channel() (buffere ==8024== by 0x4376BF: operator() (unique_ptr.h:78) ==8024== Invalid read of size 8 ==8024== at 0x9C1756: boost::fibers::context::~context() (in /my_server) ==8024== by 0x9C31CF: boost::fibers::main_context::~main_context() (in /my_server) ==8024== by 0x6B0B85E: __call_tls_dtors (in /usr/lib64/libc-2.26.so) ==8024== by 0x5D49558: start_thread (in /usr/lib64/libpthread-2.26.so) ==8024== by 0x6BC92FE: clone (in /usr/lib64/libc-2.26.so) ==8024== Address 0xa6f0010 is 32 bytes inside a block of size 232 alloc'd ==8024== at 0x4C2D1DA: operator new(unsigned long) (vg_replace_malloc.c:334) and thousands more similar to this. Now, is there something about fibers that causes this as false positives (such as valgrind not knowing about fibers or coroutines) or is there an underlying problem here? This is running on AWS Linux 2, built with gcc 7.3, boost 1.69. Multithreaded release build with debug info. Nothing out of the ordinary. I am a bit concerned about this and wanted to let the list know. Can provide more output on demand. Cheers, Stephan

2 2

Re: [boost] [review][variant2] Variant2 Review Starts April 1
by dariomt＠gmail.com 26 Mar '19

26 Mar '19

> > On Mon, 25 Mar 2019 at 17:18, dariomt--- via Boost <boost(a)lists.boost.org> > wrote: > > > ... as I would expect many more current users of the venerable > > boost::variant than of its much younger cousin std::variant. > > > > Why do you expect that and do you think that will stay that way? Well, Boost.Variant has been around so much more time than std::variant, so this seems obvious to me. For new code, maybe people will just use std::variant, but there's more old code than new code. Also, I'd say the cost of migrating from Boost.Variant to std::variant is non-zero, and the benefits are not clear (to me), so I'd expect not many people to undergo this migration. My feeling is that the library is aimed at current users of std::variant, offering a "better" pin-compatible alternative, but if I'm using Boost.Variant I believe I also should be considered a potential user. That's why I'm curious about the Boost.Variant2 review, we might get more clarity by comparing the three versions, and we may even get guidance for a migration path from Boost.Variant to Boost.Variant2. > My > personal feeling is that C++17-use is picking up at break-neck speed. For > good or for worse, although there appears to be a lot of controversy over a > (any) variant [and there are quite some quite different implementations > around], the std::variant is the one in the std, which seems to give it a > head start. Well, in my (limited) experience Boost is ubiquitous, so being in std is not that much of a head start. > In my view there can only be one objective with boost varant2, > and that is if it is decided [here] that it is (much) better than the > current std::variant, the C++20 std::variant should be/become the proposed > boost::variant2. > > degski > I wonder if code dealing explicitly with valueless_by_exception() will break if you make this change.

2 1

Re: [boost] [review][variant2] Variant2 Review Starts April 1
by dariomt＠gmail.com 26 Mar '19

26 Mar '19

> > dariomt--- wrote: > > > The class boost::variant2::variant<T...> is an almost conforming > > > implementation of std::variant with the following differences: > > > > > > I see the useful comparison to std::variant in the doc, however I'm > using > > boost::variant extensively in my code. > > > > It would be very useful to have also a short comparison to > boost::variant > > in the doc, as I would expect many more current users of the venerable > > boost::variant than of its much younger cousin std::variant. > > The main difference is that Variant2 is a pin-compatible replacement for > std::variant, whereas Boost.Variant isn't (at least for now). So it's > easier > to switch from std::variant to Variant2 and back (depending f.ex. on > whether > std::variant is available.) > > The second most important difference would probably be the fact that > Boost.Variant may do heap allocations. > This is useful info, thanks! I understand that the main objective is to offer a "better" std::variant, but as a user of Boost.Variant wondering "Should I consider migrating to Boost.Variant2?", I would expect a section in the doc addressing this question.

1 0

Which forum to handle issues/questions regarding libraries
by Robert Ramey 25 Mar '19

25 Mar '19

I've been studying the boost multiprecision library and I have a few questions relating to various aspects of said library. These questions are quite specific to that library and I'm not sure that they are of wider interest other than to a couple people. So I'm wondering if it would be better to post these as library issues on github or on this list or both. It used to be simple but now we have at least three places to discuss these things: slack, here and github issues for the library in question. Also sometimes some PRs can highlight differences which can get ironed out in the PR comments. Do we have a consensus as to the preferred way to select the correct forum? Robert Ramey

5 4

Looking for a Mentor: GSoC 19: Boost.uBLAS: Linear and Multilinear...: Project 1 and 2
by forcha glen 24 Mar '19

24 Mar '19

Hello, I am interested in any of these two projects. I do not yet have a mentor. I need mentor. Regards, Glen

2 1

Re: [boost] Master branch open for merging
by Nikita Kniazev 22 Mar '19

22 Mar '19

I would like to merge Spirit to master. The develop contains bunch of minor changes, but I important ones are: Endian namespace pollution and macros conflict fixes: https://github.com/boostorg/spirit/commit/6c258d506c2bbadccdb9f25e481984aca… https://github.com/boostorg/spirit/commit/74c0ec310a2345cb95ffb947327f69007… https://github.com/boostorg/spirit/commit/9d48b5a23197bbbcc4a3a8990c164b1cf… GCC 6/7 regression avoidance: https://github.com/boostorg/spirit/commit/8bd9b6ece40f9324a902bb0f726e785ff… The regression matrix is green for two weeks.

2 1

[release] Boost 1.70.0 Beta 1 is now available
by Marshall Clow 22 Mar '19

22 Mar '19

[ resending with a non-empty subject line ] Boost release 1.70.0 beta 1 is now available at: <https://dl.bintray.com/boostorg/beta/1.70.0.beta1/source/> The SHA256 checksums are as follows: dbf89645e509acb2e53eac3c633834f1dec80bd8622e6e652a9741dcf0807f17 ./boost_1_70_0_b1.7z 957b984b58656a3ec00661ecad7ef82e3a094bad36e37b9e6624843237854679 ./boost_1_70_0_b1.tar.bz2 76d149c1fb9e8a5ceb3bc1e5587edc40fa79a43e8b990d877c2210f0382b9421 ./boost_1_70_0_b1.tar.gz 71e990b2c26880521fd98459b184ee172ce1c46dcf554b6eaab7776b8b6369a6 ./boost_1_70_0_b1.zip For details of what's in the release, see < https://www.boost.org/users/history/version_1_70_0.html>. Please download the beta, give it a try, and report any problems you encounter. Thanks, -- The Boost Release Team

6 14

[Process] Proposed solution for posix pipes staying open
by Bills, Jason M 22 Mar '19

22 Mar '19

Hello, I'm new to Boost and looking for some help on the right process to propose patches. I'm running in an embedded Linux environment (OpenBMC) using Boost 1.69.0 and just switched a couple of std::system() calls to boost::process::system() calls. After making this change, I noticed that each time my process executed the bp::system() call, I would get an extra pipe fd in my /proc/<pid>/fd list. I did some debugging and have found a possible solution for this issue in the Boost.Process posix headers that I would like to propose. What is the right forum or process to post my patch (post it here, github pull request, etc.)? Thanks! -Jason

2 2

questions about boost multiprecision
by Robert Ramey 22 Mar '19

22 Mar '19

I'm looking more carefully at Boost Multiprecision than I have in the past and have a couple of questions: It's not clear to me how errors are handled. For example, what happens in a divide by zero? Or what happens when a result overflows. I'm aware that this will likely vary depending on whether the arguments are arbitrary precision made a runtime or a precision fixed at compile time. In any case, looking through the manual I can't find this information. Of course this package is so ambitious, that it's possible that I've missed it but in that case a pointer would be appreciated. Spending some time on this makes me appreciate what an incredibly ambitious accomplishment this is. It's really unbelievable. I would be curious how frequently various parts of the package are used. Robert Ramey

4 4

usage of auto in tutorials
by Stephan Menzel 22 Mar '19

22 Mar '19

Hello all, I was eagerly awaiting the release of the 1.70 beta, especially for outcome, which I have much use for, having lots of async functionality. While looking at the tutorial here that https://www.boost.org/doc/libs/1_70_0_beta1/libs/outcome/doc/html/index.html I notice that auto is used instead of the types. Is there a background to this? I question if this is such a good thing in tutorials. The first thing I like to know about a new lib is the types and classes it offers and auto obfuscates this. Is there any consensus in the boost community as to how and if tutorials and docs should use auto? I have concerns about this and feel it doesn't increase the otherwise great quality of documentation and tutorials for new libs. Cheers, Stephan

10 17

[test] unit test command-line handling
by Stefan Seefeld 22 Mar '19

22 Mar '19

Hello, this is a question concerning the Boost.Test framework. I'd like to pass command-line arguments to my tests, and I'm unsure of how to proceed. I have found https://www.boost.org/doc/libs/1_68_0/libs/test/doc/html/boost_test/adv_sce…, which shows how to access the command-line programmatically, but that's declared obsolete, and it's also lacking some important info, such as how I should handle the argv vector. Are there any examples that demonstrate this use case ? Specifically: * What (non-deprecated) API can I use to access command-line arguments during test initialization ? * How does my own handling of command-line arguments interact with Boost.Test's own command-line argument handling ? Thanks, Stefan -- ...ich hab' noch einen Koffer in Berlin...

3 8

[move] Bug causing issue #81 in Interprocess
by Ion Gaztañaga 21 Mar '19

21 Mar '19

Hi, Looks like a Boost.Move bug that is causing problems in Interprocess and potentially in other libraries like Container. The bug is present in the soon to be released Boost 1.70. The bug was reported by Nikita Kniazev for Interprocess: https://github.com/boostorg/interprocess/issues/81 I've committed a simple fix in the develop branch: https://github.com/boostorg/move/commit/756c964798ff1110406fab541b85267aefb… I hope the regression can cycle soon and release managers can approve the patch for Boost 1.70. Best, Ion

1 0

[GSoC 2019] Seeking guidance for Boost.uBlas (Project 4)
by livingstonegcs 21 Mar '19

21 Mar '19

Hello Boost community, I am GCS Living Stone, a Computer Science and Engineering undergraduate at National Institute of Science and Technology. I have fair amount of knowledge in Linear Algebra and skills in C++, Python programming. I have gone through Boost GSoC2019 proposal list. I found interest in Boost.uBlas Project 4: Non-negative matrix factorization implementation. I am seeking information regarding where to submit the competency test and how to begin with the project proposal as the project description has not mentioned any specific techniques. [Also I would like to bring to your notice that the Boost.Python project just mentions the project number but does not describe the projects.] Looking forward for the advice and guidance in the mentioned issue. Thanking you, GCS Living Stone -- Sent from: http://boost.2283326.n4.nabble.com/Boost-Dev-f2600599.html

1 0

GSoC : Boost.Geometry: Generic Geometry Library
by Sarah Arrey 20 Mar '19

20 Mar '19

Dear Sir/Madame, My name is Sarah Arrey. I am a student in the University of Buea, Cameroon. I have written professional programs in C++. As a result of my Anglo-Saxon culture, and currently in the faculty of science, I have good knowledge in mathematics beyond that of the high school; my country is Bilingual (English and French). I am interested in applying for the following two projects: PROJECT 3: Implementation of Algorithms for Computing the Delaunay Triangulation PROJECT 4: Implementation of Algorithms for Random Point Generation I am willing to forward code for the Programming Competency Test, when applying. How do I get started? Regards, Sarah

3 2

GSoC 2019 - Boost.Geometry: Generic Geometry Library
by Indira Ngandi 20 Mar '19

20 Mar '19

Hello, I am Indira Ngandi, a Cameroonian (not an Indian). I am a student in the University of Buea, Cameroon. I have good knowledge in C/C++. I also have good knowledge in British Further Mathematics. I am interested in applying for the following two projects. I know that only one can be accorded to me. I would like to apply for two to improve my chances of having one. The projects are: PROJECT 1: Implementing Algorithms for the Concave Hull problem PROJECT 2: Implementing Support for Non-Cartesian Geometries in Convex_Hull How do I start? Regards, Indira

4 4

Regarding BOOST.Astronomy GSOC'19
by Sarthak Singhal 20 Mar '19

20 Mar '19

Hello everyone, I am Sarthak Singhal currently in my second year pursuing Computer Science and Engineering from IIT Kanpur. I have checked out the astronomy library of boost and the work done on it in previous year's GSOC. I am interested in making contributions to this library. I am proficient in C++ and have an experience of about one and a half years. But before that I want to complete the programming competency test and wanted to know that whether I have to implement the vector class from scratch or I have use the part of boost/astronomy/coordinate/cartesian_representation.hpp and some other header files.

2 1

GSoC Linear and Multilinear Algebra with Matrix and Tensor Computations
by forcha glen 19 Mar '19

19 Mar '19

Hello, I am Glen Beloa. I am a student in the University of Buea, Cameroon. I am studying for a Master's degree in Telecommunications and Networking. I understand that I can apply for two projects. I would like to apply for the projects: Project 1 : Extending and modifying boost::numeric::ublas::tensor Project 2 : Adding new numerical linear and multilinear algebra algorithms How do I get started? Regards, Glen

1 0

GSoC Linear and Multilinear Algebra with Matrix and Tensor Computations
by forcha pearl02 19 Mar '19

19 Mar '19

Hello, I am Pearl Fri. I am a student in the University of Buea, Cameroon. I am studying for a BEng degree in Computer Engineering. I would like to apply for the following two projects: Project 3 : Modifying (smart) expression templates Project 4: Implementing non-negative matrix factorization in uBlas How do I get started? Regards, Pearl

1 0

MSVC 2019 and 1.70 beta
by Olaf van der Spek 19 Mar '19

19 Mar '19

Hi, Is 2019 not properly supported yet? > Building Boost.Build engine > 'cl' is not recognized as an internal or external command, > operable program or batch file. > Failed to build Boost.Build engine. > Please consult bootstrap.log for further diagnostics. >From a dev prompt it doesn't appear to work either: ********************************************************************** ** Visual Studio 2019 Developer Command Prompt v16.0.0-pre.4.2 ** Copyright (c) 2019 Microsoft Corporation ********************************************************************** C:\Program Files (x86)\Microsoft Visual Studio\2019\Preview>cd /vc C:\vc>cd boost_1_70_0 C:\vc\boost_1_70_0>bootstrap.bat Building Boost.Build engine Generating Boost.Build configuration in project-config.jam for msvc... Bootstrapping is done. To build, run: .\b2 To generate header files, run: .\b2 headers To adjust configuration, edit 'project-config.jam'. Further information: - Command line help: .\b2 --help - Getting started guide: http://boost.org/more/getting_started/windows.html - Boost.Build documentation: http://www.boost.org/build/ C:\vc\boost_1_70_0>b2 warning: Did not find command for MSVC toolset. If you have Visual Studio 2017 installed you will need to specify the full path to the command, set VS150COMNTOOLS for your installation, or build from the 'Visual Studio Command Prompt for VS 2017'. Performing configuration checks - default address-model : none - default architecture : none Building the Boost C++ Libraries. error: No best alternative for libs/context/build/asm_sources next alternative: required properties: <abi>aapcs <address-model>32 <architecture>arm <binary-format>elf <threading>multi <toolset>clang not matched next alternative: required properties: <abi>aapcs <address-model>32 <architecture>arm <binary-format>elf <threading>multi <toolset>gcc not matched -- Olaf

7 13

I am interested to participate in BOOST GSOC2019 project
by raghuchandra kanakamedala 19 Mar '19

19 Mar '19

Hi I am Raghuchandra studying 3rd year B.Tech at IIIT Hyderabad. It would be great to contribute to Boost.GIL: generic image library.I have ideas for both the projects.I had this course Digital Image Processing also done a project "Road detection from satellite images" based on the paper attached.my implementation link to git https://github.com/savera2020/dip_project/ .I have good skills in C++ programming. so can you provide the mail id of mentor so that we can go more deeper about the project.please consider my request to contribute to project.without a doubt i will give my best. best regards Raghuchandra

2 1

GSoC 2019 preparation , BOOST.uBLAS project
by mo'men 18 Mar '19

18 Mar '19

Hi, I’m Moamen Ahmed , 4th year student at computer engineering department at Ain Shams university ,Cairo, Egypt. I have read the interesting project ideas , and I have found myself interested in BOOST.uBLAS project. Also, I have good experience in Linear Algebra , and C++ programming. I have developed c++ projects on my own and still do . I ‘m trying now to make the competency test. I 'd like to join BOOST.uBLAS project ,so kindly , help me through the process on how to enhance my opportunity to join this project . Best regards, Moamen Ahmed

2 1

Call for Submissions: International Conference on Information Society (i-Society 2019)
by International Conference on Information Society 18 Mar '19

18 Mar '19

If you are not able to see this mail, click http://r.confinfosoc.org/mk/mr/hHTtReTMggQeh5kiYnT0MxUABiXYJEhpmmVH7xlJw4VK… for Submissions: International Conference on Information Society (i-Society 2019) ********************************************************************************** International Conference on Information Society (i-Society 2019) 22-24 October, 2019 Venue: Royal Marine Hotel Dún Laoghaire, Co. Dublin, Ireland www.i-society.eu ********************************************************************************* The i-Society is a global knowledge-enriched collaborative effort that has its roots from both academia and industry. The conference covers a wide spectrum of topics that relate to information society, which includes technical and non-technical research areas. The mission of i-Society 2019 conference is to provide opportunities for collaboration of professionals and researchers to share existing and generate new knowledge in the field of information society. The conference encapsulates the concept of interdisciplinary science that studies the societal and technological dimensions of knowledge evolution in digital society. The i-Society bridges the gap between academia and industry with regards to research collaboration and awareness of current development in secure information management in the digital society. The topics in i-Society 2019 include but are not confined to the following areas: *New enabling technologies - Internet technologies - Internet of Things (IoT) - Wireless applications - Mobile Applications - Cloud and iCloud - Multimedia Applications - Protocols and Standards - Ubiquitous Computing - Virtual Reality - Human Computer Interaction - Geographic information systems - e-Manufacturing - Electronic Discovery (eDiscovery) - Software Applications - Disruptive Technology *Intelligent data management - Intelligent Agents - Intelligent Systems - Intelligent Organisations - Content Development - Data Mining - Data Management Software - e-Publishing and Digital Libraries - Information Search and Retrieval - Knowledge Management - e-Intelligence - Compliance and Recovery from Data Loss - Knowledge networks - Risk Mitigation - Cost Efficiency - Quality Assurance - Information Management - Support Litigation - Complex Investigations *Secure Technologies - Internet security - Web services and performance - Secure transactions - Cryptography - Payment systems - Secure Protocols - e-Privacy - e-Trust - e-Risk - Cyber Security Investigations and Defence - Cyber law - Forensics - Information assurance - Mobile social networks - Peer-to-peer social networks - Sensor networks and social sensing - Information Security Compliance *e-Learning - Collaborative Learning - Curriculum Content Design and Development - Delivery Systems and Environments - Educational Systems Design - e-Learning Organisational Issues - Evaluation and Assessment - Virtual Learning Environments and Issues - Web-based Learning Communities - e-Learning Tools - e-Education *e-Society - Global Trends - Social Inclusion - Intellectual Property Rights - Social Infonomics - Computer-Mediated Communication - Social and Organisational Aspects - Globalisation and developmental IT - Social Software - Smart City *e-Health - Data Security Issues - e-Health Policy and Practice - e-Healthcare Strategies and Provision - Medical Research Ethics - Patient Privacy and Confidentiality - e-Medicine *e-Governance - Democracy and the Citizen - e-Administration - Policy Issues - Virtual Communities *e-Business - Digital Economies - Knowledge economy - eProcurement - National and International Economies - e-Business Ontologies and Models - Digital Goods and Services - e-Commerce Application Fields - e-Commerce Economics - e-Commerce Services - Electronic Service Delivery - e-Marketing - Gig Economy - Online Auctions and Technologies - Virtual Organisations - Teleworking - Applied e-Business - Electronic Data Interchange (EDI) - Innovative Strategies - Business Intelligence - Information Intelligence - Forensic Accounting *e-Art - Legal Issues - Patents - Enabling technologies and tools *e-Science - Natural sciences in digital society - Biometrics - Bioinformatics - Collaborative research *Industrial developments - Trends in learning - Applied research - Cutting-edge technologies - Industrial Control Systems - Communications Compliance * Research in progress - Ongoing research from undergraduates, graduates/postgraduates and professionals SUBMISSION INSTRUCTIONS: * You can submit your extended abstract or paper online at http://www.i-society.eu/paper-submission/ or email it to papers(a)i-society.eu * You can submit your poster via email at posters(a)i-society.eu * You can submit your workshop or tutorial proposal at workshop(a)i-society.eu or tutorial(a)i-society.eu * You can submit your speaker's proposal at speakers(a)i-society.eu IMPORTANT DATES: *Abstract or Extended Abstract Submission Date: April 25, 2019 *Notification of Abstract or Extended Abstract Acceptance / Rejection: April 30, 2019 *Research Paper Submission Date: May 01, 2019 *Notification of Research Paper Acceptance / Rejection: May 15, 2019 *Camera Ready Paper Due: July 15, 2019 *Proposal for Workshops / Tutorials: May 01, 2019 *Notification of Workshop/Tutorials Acceptance / Rejection: May 05, 2019 *Poster / Demo Proposal Submission: May 01, 2019 *Notification of Poster / Demo Acceptance: May 05, 2019 *Early Bird Registration Deadline: June 01, 2019 *Late Bird Registration Deadline: July 01, 2019 *Conference Dates: October 22-24, 2019 For more details, please visit www.i-society.euIf you wish to unsubscribe from our newsletter, click http://r.confinfosoc.org/mk/un/cJt0lk_6hTiWU2mR1gcBlsWcuOzQ_Zs4QdpVvm0OQwTN…

2 1

question about GSoC 2019
by Aziz Mousa 18 Mar '19

18 Mar '19

hello there, I want to participate in boost project in the GSoC but I am confused a little bit and there is some points that I don't understand and I need some help here please * First : to be involve in this event if I don't have my own idea should I choose one project form the list like boost.GIL or boost.uBLAS as all or should choose a specific project inside one of them like project 1, or project 2 * second: if I choose project in boost.uBLAS should I be professional in machine learning? because I am still in the start of road in this field but I am work on it and will make progress as soon as possible * third : is there any thing should I do or submit before the student registration opens in GSoC website ? thanks in advance.

2 2

Networking TS + Beast, NEW Tutorials, Read this to learn std::net !!!
by Vinnie Falco 17 Mar '19

17 Mar '19

Fellow C++, Boost, and WG21 Enthusiasts, lend me your ear! I write to inform you about exciting developments in C++ networking. First, a bit of background. Networking comes in three flavors: * Networking TS <https://cplusplus.github.io/networking-ts/draft.pdf> * Boost.Asio <https://www.boost.org/doc/libs/1_69_0/doc/html/boost_asio.html> * Standalone Asio <https://github.com/chriskohlhoff/asio> These three are for the most part identical, except that Asio flavors have additional features like ssl::stream and signal_set which are not in the TS, but will very likely appear in a future update or version. We've had Asio for over a decade now, but there is a shortage of experts. Some people believe this shortage is because Asio in particular (and thus, Networking TS since they have identical interfaces) is "difficult to use." I believe it is wrong to blame Asio for this. Concurrent programs in general are hard to write. This is applicable: "Unfortunately, today's reality is that only thoughtful experts can write explicitly concurrent programs that are correct and efficient. This is because today's programming models for concurrency are subtle, intricate, and fraught with pitfalls that easily (and frequently) result in unforeseen races (i.e., program corruption) deadlocks (i.e., program lockup) and performance cliffs (e.g., priority inversion, convoying, and sometimes complete loss of parallelism and/or even worse performance than a single-threaded program). And even when a correct and efficient concurrent program is written, it takes great care to maintain — it's usually brittle and difficult to maintain correctly because current programming models set a very high bar of expertise required to reason reliably about the operation of concurrent programs, so that apparently innocuous changes to a working concurrent program can (and commonly do, in practice) render it entirely or intermittently nonworking in unintended and unexpected ways. Because getting it right and keeping it right is so difficult, at many major software companies there is a veritable priesthood of gurus who write and maintain the core concurrent code." - Herb Sutter, "The Trouble with Locks", <http://www.drdobbs.com/cpp/the-trouble-with-locks/184401930> Although this was written in 2005 it is still relevant today. It is understandable that Asio will be the first target of anger and frustration when writing concurrent programs, since it is on the "front line" so to speak. There has also been a distinct shortage of *good* tutorials and examples for Asio. Articles or blog posts which teach you step by step, explaining everything, and giving example code which demonstrates best practices. Boost.Beast is my low-level HTTP/WebSocket library which builds on Boost.Asio: <https://github.com/boostorg/beast> In the original release of Beast, the documentation stated "prior understanding of Boost.Asio is required." However, field experience has shown that users ignore that requirement and attempt to write complex, concurrent programs as their first-time introduction to both Beast and Asio. Based on feedback from committee members, and to serve users better, the scope of Beast has been enlarged to include first-time users of networking. The upcoming Boost 1.70 release reflects this new scope and I am excited to announce some very nice things which you can access today. First of all, Beast documentation and examples no longer use the "boost::asio" namespace, they the namespace alias "net::". While this is cosmetic, it reinforces the notion when inspecting code that it is equally applicable to Boost.Asio, Asio, and Networking TS (identifiers which are not in the TS, such as signal_set, are still qualified with boost::asio). A new documentation page explains the three flavors of networking: <https://www.boost.org/doc/libs/master/libs/beast/doc/html/beast/using_io.ht…> This is also explained in my 2018 CppCon presentation: <https://youtu.be/7FQwAjELMek?t=444> I have added a "Networking Refresher", a complete overview of networking from soup to nuts. No prior knowledge or understanding of networking is required, everything is explained in detail so if you want to learn this is the place to start. I also kept it short, but it is loaded with hyperlinks for further learning: <https://www.boost.org/doc/libs/master/libs/beast/doc/html/beast/using_io/as…> There was a recent paper in Kona, P1269R0 ("Three Years with the Networking TS") about difficulty of implementing timeouts. To address this, Beast now has a stream class which implements configurable timeouts for you, and callers no longer have to fiddle with timers manually anymore. Everything "Just Works." It achieves the P1269R0 author's goal of having timeouts "built-in to asynchronous operations", but in a way that fits in with the design of the TS: <https://www.boost.org/doc/libs/master/libs/beast/doc/html/beast/using_io/ti…> I feel that this `beast::basic_stream` serves as an existence proof that the current design of Networking TS is sound - the TS offers a flexible toolbox which lets you build your own framework the way that you want it, without making odd choices for you. We are still discovering ways of leveraging it to maximum use. The beast::websocket::stream also has built-in timeouts, but they are enhanced to support "idle pings" (keeping client connections alive) and everything is fully configurable: <https://www.boost.org/doc/libs/master/libs/beast/doc/html/beast/using_webso…> All you need to do to get sensible, suggested websocket timeouts is add one line of code after creating your stream: ws.set_option(websocket::stream_base::timeout::suggested( beast::role_type::server)); To address the cumbersome boilerplate of writing composed operations (specifically the need to propagate the associated allocator and associated executor, and to avoid invoking the completion handler from within the initiating function when the operation would complete immediately) Beast adds two new utility base classes, with plentiful documentation and examples throughout: <https://www.boost.org/doc/libs/master/libs/beast/doc/html/beast/using_io/wr…> There are two well-rounded examples which show you step by step how to write these things in a safe way: <https://www.boost.org/doc/libs/master/libs/beast/doc/html/beast/using_io/wr…> <https://www.boost.org/doc/libs/master/libs/beast/doc/html/beast/using_io/wr…> I have a big, new open source project which implements a server, that uses the `system_context`, taking full advantage of native Windows and Mac OS system-level execution context features. To support this use case and industry feedback, the examples in Beast now default to being always thread-safe. All examples use a "strand", and leverage P1322R0 ("Networking TS enhancement to enable custom I/O executors"). Yes, this paper which was approved in Kona, is now implemented in both Boost.Beast, and Boost.Asio, including all of the Beast examples, so if you pick up Boost 1.70 (or the master branches from github) you can start playing with this as soon as you're done reading this message!! <http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p1322r0.html> We have an active #beast channel in the C++ Slack (https://slack.cpp.al) where experienced users can help, no question is too small! I hope you will join me and the rest of the Beast and Asio community in exploring what the very powerful Networking TS and Asio libraries have to offer, and build something great together! Regards P.S. Don't forget to star the repository! <https://github.com/boostorg/beast>

4 7

I am interested to participate in BOOST GSOC2019 project
by raghuchandra kanakamedala 17 Mar '19

17 Mar '19

I am raghuchandra studying 3rd year B.Tech at IIIT Hyderabad.It would be great to contribute to Boost.GIL: generic image library.I have ideas for both the projects.I had this course Digital Image Processing also done a project "Road detection from satellite images" based the paper attached.my implementation link on git https://github.com/savera2020/dip_project/.I have good skills in C++ programming. so can you provide the mail id of mentor so that we can go more deeper about the project.please consider my request to contribute to project.without a doubt i will give my best. Thanking You.

1 0