- Boost - lists.preview.boost.org

Re: [boost] Re: [tuple] attempt to fix a BCB regression, and a plea for help
by JOAQUIN LOPEZ MU?Z 17 Oct '04

17 Oct '04

----- Mensaje original ----- De: Tobias Schwinger <tschwinger(a)neoscientists.org> Fecha: Domingo, Octubre 17, 2004 1:01 pm Asunto: [boost] Re: [tuple] attempt to fix a BCB regression,and a plea for help > JOAQUIN LOPEZ MU?Z wrote: > > Umm... This got me thinking, maybe the whole BCB-specific > > patch is just overkill, and it only takes to avoid > > the add_const<> construct. > > The attached file does just this, i.e. it relies on > > the default implementation for element<>, using > > plain const-qualifying instead of add_const<> for > > BCB. Would you be so kind to give it a try? Thanks in > > advance. > > > > This new version compiles fine with BCC 5.6.4 but does not compile > with > BCC 5.5.1 (and versions below this, according to Boost.Config). > > The patch is the difference from the file attached to the post I > reply > to (and not the first file you sent) and makes it work again. > > It uses the previous workaround in case > BOOST_NO_CV_SPECIALIZATIONS is set. > Another check for BCB within this block could be made in order to > use > 'add_const' for compilers where it works fine (I omitted it, for now). > > > Here's my (still fuzzy) problem analysis: > > 1. The "BCC <= 5.5.1 - problem" is that for these versions of BCC > cv-specializations don't work. > > 2. The "add_const - problem" could have something todo with the > fact > that for BCC 'type const' and 'const type' can be different types. > [ see the note regarding the '__BORLANDC__' - block in > 'is_const.hpp' ] As I understand it, the comment you refer to has to do with cv-qualifying references --not our problem now, I think. > I am not sure if and how this affects template argument > substitution, > but I changed > > typename T::head_type const > > to > > const typename T::head_type > > , just in case... > My only objection to your patch is that the problem with add_const is attributed to BOOST_BCB_PARTIAL_SPECIALIZATION_BUG Do you have any reason to think so? I'd prefer to have that part guarded by a simple __BORLANDC__ workaround, given our current (lack of) knowledge about what's causing the problem. If no one complains, I'll commit this stuff to the CVS tomorrow. Thanks everyboydy for your help. Joaquín M López Muñoz Telefónica, Investigación y Desarrollo _______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost

3 2

[preliminary submission] Is there any interest in an algebraic vector class?
by Debian User 17 Oct '04

17 Oct '04

Hi @, I've uploaded the initial version of the algebraic vector class as proposed in comp.lang.c++.moderated. It has been renamed to Euclidean vector class as a result of the discussions so far. Is there any interest here? Comments are welcome. The library is not yet in the boost name space and not yet under the boost licence. That's of course going to change if it eventually should be accepted. Andreas

2 1

Re: [boost] Re: [tuple] attempt to fix a BCB regression, and a plea for help
by JOAQUIN LOPEZ MU?Z 17 Oct '04

17 Oct '04

Hi Tobias, ----- Mensaje original ----- De: Tobias Schwinger <tschwinger(a)neoscientists.org> Fecha: Sábado, Octubre 16, 2004 10:24 pm Asunto: [boost] Re: [tuple] attempt to fix a BCB regression,and a plea for help > > Hi, > > the patch makes tupe_test_bench.cpp compile successfully on BCB > 5.5.1 > and 5.6.4. This is great news! Thanks for investigating. > > I have to add the disclaimer that it is an intuitive guess and may > not > be a real solution. I gave it a try, that's all ;+). > The code looked good before I touched it and I have honestly no > idea why > my adjustments make BCB behave again (for both changes)... > Umm... This got me thinking, maybe the whole BCB-specific patch is just overkill, and it only takes to avoid the add_const<> construct. The attached file does just this, i.e. it relies on the default implementation for element<>, using plain const-qualifying instead of add_const<> for BCB. Would you be so kind to give it a try? Thanks in advance. Joaquín M López Muñoz Telefónica, Investigación y Desarrollo

2 1

[boost] [tuple] attempt to fix a BCB regression, and a plea for help
by JOAQUIN LOPEZ MU?Z 17 Oct '04

17 Oct '04

Hello, A couple of days ago I prompted about the status of a supposed regression on tuple_test_bench (http://tinyurl.com/62plc) The attached file (to be replacing boost/tuple/detail/tuple_basic.hpp) is an (unsuccesful) attempt to fix the problem, which is related to the inability of BCB to cope with element<N,T> being specialized for T a const tuple type. AFAICS, the attached file should work (I've checked the workaround with other compilers), but BCB still doesn't like. Lacking the necessary BCB skills and tools, I'd appreciate if someone can take a look at it and, hopefully, turn it into a valid workaround for Borland. The relevant part is guarded by a "#if defined(__BORLANDC__)" directive. There are 14 regressions left in the main trunk, and if we all pull a little together, the long awaited Boost 1.32 release could be make real very soon. Thanks for the help. Joaquín M López Muñoz Telefónica, Investigación y Desarrollo

4 4

[Graph] New algorithms on graph_devel_1_33_0 branch
by Doug Gregor 16 Oct '04

16 Oct '04

I've just checked in some new graph algorithms that have been contributed to the BGL. They're on the branch graph_devel_1_33_0 until we've branched off the 1.32.0 release, at which point they will go into the trunk. The interesting algorithms are: - A* search, from Kristopher Beevers and Jufeng Peng - Floyd-Warshall all-pairs shortest paths, from Lauren Foutz and Scott Hill - Fruchterman-Reingold force-directed layout, from Doug Gregor The first two algorithms came out of David Musser's Generic Programming class at RPI. Consider that a challenge for any one else teaching courses in Generic Programming now or in the future: you know who you are :) I'll also be moving (sequential) code from the Parallel BGL project into CVS as soon as it becomes ready, and will batch up messages to list announcing the additions. All of the code has been written or reviewed by me, so you know where to direct comments and complaints :) Doug

2 2

Re: [boost] StringAlgo - (was: boost::tokenizer )
by Dirk Gregorius 16 Oct '04

16 Oct '04

Hi there, > I'm not very good at explaining the things in short, but I'll try. thanks for the explanation. I think I got it and it was not as bad as you maybe think. To come back to the initial problem of string tokenizing. I am trying to implement the finder in terms of ForwardIteratorT. Here is what I think I am expecting to do - also actually I am not very sure about it. I justed started to read M. Austern's book and I am quite new to concepts, requirements and so on. So here is what I did so far: struct comment_finder { template<typename ForwardIteratorT> boost::iterator_range<ForwardIteratorT> operator()( ForwardIteratorT Begin, ForwardIteratorT End ) { ForwardIteratorT first, last; while ( Begin != End ) { first = Begin; if ( *Begin++ == '/' && *Begin == '/' ) { last = first; while ( *last++ != '\n' ) { // FAILURE: Return an empty range if ( last == End ) return boost::make_range( ??, ?? ); // return an empty range - HOW? } // SUCCESS: Return the range return boost::make_range( first, last + 1 ); } } return boost::make_range( ??, ?? ); // return an empty range - HOW? } }; Is this the way I have to implement the finder or can it be implemented using some facilities in your library? This implementation is quite low-level, so I am wondering if this is correct. Secondly, for the case this is correct, how should I return an empty range or what shall I return if didn't find a matching range? What are the following steps? Do I have to split two time times or how do I erase the comments out of the string? Will the final token iterator be only of ForwardIteratorT or will be of the type of the conatiner that is holding the tokens. ( e.g. for a vector it would be a randow access iterator? ) Sorry for the inconvinience and thanks for the help so far. -Dirk

2 1

RE: [boost] Library Proposal: database (boost::db)
by Brian Braatz 16 Oct '04

16 Oct '04

> -----Original Message----- > On Behalf Of Jonathan Wakely > On Fri, Oct 15, 2004 at 10:56:58AM -0600, Brian Braatz wrote: > > > As a user I would like to see something along the lines of DTL \ Mysql++ > > > > http://dev.mysql.com/doc/plusplus/en/index.html > > As a user, maybe - but as a developer I wouldn't touch MySQL++ with > a ten foot pole. > > I'm the current maintainer of mysqlcppapi, which was forked from MySQL++ > to fix the most glaring errors, but I'd even hesitate to recommend > that! It is a vast improvement, but is still far from the quality I'd > expect from a Boost library. > > jon > [Brian Braatz] Please allow me to clarify; I am referring to the INTERFACE presented to the programmer. I had pretty good success taking people from a MS ADO world and using MYSql++. >From your web page: " Here are the major changes: All objects are classes with constructors and destructors, so all data is initialized. Reference-counting is used to allow sharing of the various object instances and underlying connections, avoiding segfaults or complicated memory management. All classes are in the mysqlcppapi namespace There is now no public member data. Many methods have been un-inlined, allowing a much clearer file structure. The 'custom' and stored query interfaces have been removed because they made excessive use of preprocessor macros and perl-generated code. Exceptions are no longer optional - they are part of the design. The fields classes have been completely replaced. " http://mysqlcppapi.sourceforge.net/ Excellent. The work you have done, I would agree with. What I am talking about is the basic interface of being able to do: (from the mysql examples) #include <iostream> #include <iomanip> #include <sqlplus.hh> int main() { Connection con("mysql_cpp_data"); // The full format for the Connection constructor is // Connection(cchar *db, cchar *host="", // cchar *user="", cchar *passwd="") // You may need to specify some of them if the database is not on // the local machine or you database username is not the same as your // login name, etc.. Query query = con.query(); // This creates a query object that is bound to con. query << "select * from stock"; // You can write to the query object like you would any other ostrem Result res = query.store(); // Query::store() executes the query and returns the results cout << "Query: " << query.preview() << endl; // Query::preview() simply returns a string with the current query // string in it. cout << "Records Found: " << res.size() << endl << endl; Row row; cout.setf(ios::left); cout << setw(17) << "Item" << setw(4) << "Num" << setw(7) << "Weight" << setw(7) << "Price" << "Date" << endl << endl; Result::iterator i; // The Result class has a read-only Random Access Iterator for (i = res.begin(); i != res.end(); i++) { row = *i; cout << setw(17) << row[0] << setw(4) << row[1] << setw(7) << row["weight"] // you can use either the index number or column name when // retrieving the colume data as demonstrated above. << setw(7) << row[3] << row[4] << endl; } return 0; } I like the fact that I have a table\recordset style structure (Result) I like the fact that it is iterator friendly I like the fact that the code above would be understandable from a person coming from an MS ADO world (which would lead to more adoption of the library)

2 1

file modes in boost cvs
by Neal Becker 16 Oct '04

16 Oct '04

I noticed that in boost cvs files seem to have random modes. Many sources show up as executable when checked out of cvs onto my Linux box. Hopefully this will be fixed before release.

4 3

boost::tokenizer
by Dirk Gregorius 16 Oct '04

16 Oct '04

Hi, I like to break a file into tokens for processing. The file contains comments which are introduced by "//", "#" and ";". Can I setup the tokenizer directly such that the comments are skipped? If no, what would you suggest to erase the comments from my string before processing? Here is what I do right now: // CODE ifstream is( "file.txt" ); string file, line; file.reserve( 2 * 1024 * 1024 ); while ( getline( is, line ) ) { TrimHead( line ); if ( line[0] != '/' && line[1] != '/' ) file.append( line + "\n" ); // Need to append "\n" again to get the right tokens - not very nice } typedef tokenizer<char_separator<char> > Tokenizer; char_separator<char> sep(" \t\n"); Tokenizer tokens( file, sep ); // END CODE Another idea was to the following: // CODE ifstream is( "file.txt" ); string line( ( istreambuf_iterator<char>( is ) ), istreambuf_iterator<char>() ); EraseComments( line ); // END CODE Any help is appreciated. -Dirk

3 2

Re:Re: [boost] Proposal for cleanup of INT64 macros
by Robert Ramey 16 Oct '04

16 Oct '04

> There seems to be a lot of confusion about these macros, so let me try and > give you the full lowdown: > BOOST_NO_INT64 > Indicates that boost::int64_t and boost_uint64_t do not exist in > boost/cstdint.hpp. It's a defect macro because these types are documented > as existing; it doesn't indicate a defect in the compiler, although if > we're being picky, neither these types nor *any* of the exact width types > in boost/cstdint.hpp are required to be supported by C99. If you need a > 64-bit integer type then this macro is the one to check (and then use > [u]int64_t). > Note these macros should only be used when overloading/specialising > for all intrinsic types, such usage should probably be infequent IMO. This is exactly my problem with polymorphic_(i/o)archive.hpp. Its an interface class that redirects save/load for all intrinsic types to the implementation in a derived class. Among the intrinsic types considered is long and int64 (long long is not considered - the name suggested a compiler dependent kludge). Currently I use BOOST_NO_INT64 but now I see that this fails on at least one machine where apparently int64 is a typedef or macro for long. In this environment I get a compile error because a rather than a function overload I get a compiler error with function redefinition. Before, I had a homemade BOOST_NO_INTRINSIC_INT64_T which seemed to work. What is the best thing to do in this situation? > The macros BOOST_NO_INTRINSIC_INT64_T and BOOST_NO_INTRINSIC_UINT64_T > appear to have been removed, so no cleanup necessary :-) :-( It seems that this is just what I need. I didn't realize it existed as I just depended on the information in the documentation and didn't look at the config.hpp file. Robert Ramey

2 1