October 2015 - Boost - lists.preview.boost.org

Re: [boost] Boost CRC maintainer (Daryle Walker) missing in action?
by Olaf van der Spek 19 Jun '17

19 Jun '17

Hi Daryle, Any luck on your new setup? Gr, Olaf On Mon, Nov 28, 2011 at 1:11 AM, Daryle Walker <darylew(a)gmail.com> wrote: > I can look at it once I've finished my new setup. > > I had to reset my computer after a partial crash years ago. I never > got around to recreating my programming setup. My computer had been > at its maximum Operating System level back then, which is now 3 > versions behind. For the past few months, I've had my sister's old > laptop, with Windows Vista, and am trying to add a programming setup > to it now. > > > On Tue, Nov 22, 2011 at 7:18 AM, Beman Dawes <bdawes(a)acm.org> wrote: >> Hi Daryle, >> >> This guy has volunteered to take over maintenance of Boost CRC. Should >> we take him up on his offer? > >> ---------- Forwarded message ---------- >> From: >> Date: Wed, Nov 2, 2011 at 7:51 AM >> Subject: [boost] Boost CRC maintainer (Daryle Walker) missing in action? >> To: boost(a)lists.boost.org >> >> >> Hi, >> >> It looks like the Boost CRC maintainer (Daryle Walker) is missing in action? >> >> No response to tickets from the past 3 years. What's the procedure in this case? >> >> https://svn.boost.org/trac/boost/ticket/2492 >> https://svn.boost.org/trac/boost/query?component=crc&col=id&col=summary&col… > > -- > Daryle Walker > Mac, Internet, and Video Game Junkie > darylew AT gmail DOT com -- Olaf

2 2

[container] moving a pre-built vector into a flat_set
by Sam Kellett 12 Mar '17

12 Mar '17

a common problem i encounter is that i have two stage's w/r/t to a large collection of data: building and querying. vector is obviously the king of building. flat_set is the king of querying. so what i often tend to do is build up a very large vector, sort it then create a flat_set using the flat_set(ordered_unique_t) constructor. however this still copies the entire vector into the flat_set, right? what i would like to be able to do is move the vector straight into the flat_set, something like: std::vector<T> data; flat_set data_set1(std::move(data)) // move vector in and sort it // or: std::sort(data.begin(), data.end()); // sort vector flat_set data_set2(ordered_unique_t, std::move(data)) // and move it in is this doable (am i just being blind?) or is there plans/interest for this?

8 19

[Fit] pipable order of the arguments
by Vicente J. Botet Escriba 05 Mar '16

05 Mar '16

Hi, I would like to know what other think about the order of the pipe (See this issue https://github.com/pfultz2/Fit/issues/5). What would be the expected meaning of auto r1 =1 | pipable(f)(2); f(1,2) or f(2,1)? What would be the expected meaning of auto f2 = partial(f)(2); auto r1 =1 | pipable(f2); f(1,2) or f(2,1)? As the operator| has left-to-right associativity, we can not do auto x = 1 | 2 | pipable(f); We would need a way to pack the parameters auto x = forward_as_tuple(1, 2) | pipable(f); but this wouldn't compile as f has two parameters. or use parenthesis auto x = 1 | (2 | pipable(f)); and the result will be f(2, 1). Any ideas? Best, Vicente Vicente

1 1

[regression] Winapi submodule tests missing
by Andrey Semashev 13 Feb '16

13 Feb '16

Hi, The winapi submodule tests are missing from the test matrix, although the status/Jamfile.v2 lists it. This is both on develop and master. Is there something I should do to make the tests appear?

2 5

Problems building Boost libraries for Windows Store when C++/CX is involved
by Mikael Olenfalk 04 Jan '16

04 Jan '16

Hi, I am working on porting the boost libraries we depend on to winrt, most porting is rather straightforward (basically switch from win32 apis which are 20 years old to apis which are 15 years old :D ). However I have hit a bit of a problem when compiling Boost.Log. Boost.Log depends on Boost.Asio which uses C++/CX to call some of the newer Store APIs (Windows::Networking and friends). When I build I get these errors: compile-c-c++ ..\..\..\bin.v2\libs\log\build\msvc-14.0\debug\log-api-winnt\threading-multi\windows-api-store\dump_ssse3.obj dump_ssse3.cpp ..\..\..\libs\log\src\dump_ssse3.cpp: fatal error C1107: could not find assembly 'platform.winmd': please specify the assembly search path using /AI or by setting the LIBPATH environment variable call "C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\vcvarsall.bat" x86 store >nul cl /Zm800 /ZW /EHsc -nologo @"..\..\..\bin.v2\libs\log\build\msvc-14.0\debug\log-api-winnt\threading-multi\windows-api-store\dump_ssse3.obj.rsp" (As you can see I have monkey-patched msvc.jam to append the "store" argument to vcvarsall.bat - to no avail :( -- the monkey-patch is here if you want to look at it: https://github.com/mauve/build/commits/universal-windows-boost-1.59.0 ) The @response file looks like this: "..\..\..\libs\log\src\dump_ssse3.cpp" -Fo"..\..\..\bin.v2\libs\log\build\msvc-14.0\debug\log-api-winnt\threading-multi\windows-api-store\dump_ssse3.obj" -TP /Z7 /Od /Ob0 /W3 /GR /MDd /Zc:forScope /Zc:wchar_t /wd4675 /EHs /arch:SSE2 /bigobj /wd4003 /wd4456 /wd4459 /wd4503 -c -DBOOST_ALL_NO_LIB=1 -DBOOST_CHRONO_DYN_LINK=1 -DBOOST_DATE_TIME_DYN_LINK=1 -DBOOST_FILESYSTEM_DYN_LINK=1 -DBOOST_LOG_BUILDING_THE_LIB=1 -DBOOST_LOG_DLL -DBOOST_SPIRIT_USE_PHOENIX_V3=1 -DBOOST_SYSTEM_DYN_LINK=1 -DBOOST_SYSTEM_NO_DEPRECATED -DBOOST_THREAD_BUILD_DLL=1 -DBOOST_THREAD_DONT_USE_CHRONO=1 -DBOOST_THREAD_USE_DLL=1 -DDATE_TIME_INLINE -DWINAPI_FAMILY=WINAPI_FAMILY_APP -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS -D_SCL_SECURE_NO_DEPRECATE -D_SCL_SECURE_NO_WARNINGS -D_WIN32_WINNT=0x0603 "-I..\..\.." Regards, Mikael

4 10

[multiprecision] uses boost::math::gcd without including the header
by Peter Dimov 04 Jan '16

04 Jan '16

include/boost/multiprecision/cpp_int/misc.hpp uses boost::math::gcd (and lcm), but does not include common_factor_rt.hpp.

2 2

[smart_ptr] Moving cast for unique_ptr
by Karolin Varner 21 Dec '15

21 Dec '15

Hi all! There is the family of boost pointer cast (boost::static_pointer_cast, boost::dynamic_pointer_cast, ...) that allow a developer to write generic code by casting pointers regardless of whether they are some smart pointer (e.g. shared_ptr) or plain pointers. However, those functions have not been implemented for unique_ptr, because they create a copy of their pointer and unique_pointers can not be copied. In my case I still needed to cast some unique_ptr and since it's ok to move unique_ptrs I wrote a function that does exactly that. The code is below – Comments are very, very welcome. It works for my case, but I am sure it is not as generic and safe as it should be ;) . Specifically, for a library, it should be made to work on any kind of smart/plain pointer. Not just unique_ptr. Is there any interest to include a boost::static_moving_pointer_cast and the other types of casts in boost? Best, Karolin /// Dynamic cast a unique_ptr. /// /// This function shall move the pointer in in_ptr, into /// a new unique_pointer of the desire type, dynamic_casting /// it in the process. /// In given pointer shall contain a NULL pointer afterwards. /// /// If unsuccessful, function shall throw an error and leave /// in_ptr unmodified. /// /// This behaviour contrasts a bit with the behaviour of the /// normal dynamic_cast: /// 1. dynamic_cast copies objects, this moves them since /// unique_pointers can not be copied. /// 2. dynamic_cast returns a NULL pointer if the pointer to /// cast is of an incomplete type, this throws /// incomplete_cast instead, to ease error handling. /// /// @tparam T The type to convert to (as non-pointer) /// @tparam F The type to convert from (as non-pointer) /// @param in_ptr The unique_ptr to cast /// @return in_ptr, cast to the desired type template<typename T, typename F> std::unique_ptr<T> dynamic_moving_pointer_cast(std::unique_ptr<F> &in_ptr) { // Exception safety: If The dynamic cast throws an error, // or of we throw incomplete_cast, in_ptr will still be // unmodified T *plain_out_ptr = dynamic_cast<F*>(in_ptr.get()); if (plain_out_ptr == NULL && in_ptr.get() != NULL) throw incomplete_cast(); // Exception safety: Both operations are noexcept in_ptr.release(); return std::unique_ptr<T>(plain_out_ptr); }

6 11

[variant] Opinion on boost::safe_get<> and default boost::get<> behavior
by Antony Polukhin 18 Dec '15

18 Dec '15

Hi all, I'm in doubt and would like to hear opinions on the following issue. boost::get for boost::variant was not making any compile time checks, resulting in runtime errors where a compile time error must be: boost::variant<int, string> v(100); boost::get<bool>(&v); // returns NULL instead of compile time error boost::get<bool>(v); // throws exception on runtime instead of compile time error Now we have an implementation of compile time checked get in a separate branch at git: boost::variant<int, string> v(100); boost::safe_get<bool>(&v); // compile time error boost::safe_get<bool>(v); // compile time error boost::unsafe_get<bool>(&v); // returns NULL instead of compile time error boost::unsafe_get<bool>(v); // throws exception on runtime instead of compile time error I'm in doubt, what the default behavior of boost::get must be: * safe_get behavior is much closer to Standard Library behavior (just like std::get for tuples) and allows to avoid errors in user code * unsafe_get behavior is same as behavior of old boost::get and won't break user's code if boost::get is used in some generic contexs What's your opinion? -- Best regards, Antony Polukhin

10 13

[Range] sorted and randomized adaptors
by Mohammed El-Afifi 10 Nov '15

10 Nov '15

Hello everybody, I know this might have been raised a few times before in this mailing list, but I'd like to know if it's possible(or otherwise what would prevent) to have sorted and randomized adaptors so that I may have a sorted and randomized view of a range respectively. Something like vector<int> x; // operations to fill x x | boost::adaptors::sorted; x | boost::adaptors::randomized;// That one might also take an optional random generator as a parameter. I understand that in this case the adaptor isn't entirely lazy as the adapted(x here) must be completely consumed before producing a single element in the resulting range. I want to know however if having such adaptors may contradict any basic principles of the existing adaptors. P.S. Two other threads I found that discussed the same idea(for sorted only): - http://lists.boost.org/Archives/boost/2009/03/149247.php - http://lists.boost.org/Archives/boost/2006/05/105122.php

3 2

[thread] boost::future::then
by Vladimir Prus 06 Nov '15

06 Nov '15

Hi, looking through docs for some other futures implementation [1], I see this: Why not use boost::future? # At the time of writing, 1.53 (the first version with the requisite features) was brand new, not well-tested, and not available to [...] developers. It is still a bit buggy/bleeding-edge They haven't fleshed out the threading model very well yet, e.g. every single then currently spawns a new thread unless you explicitly ask it to work on this thread only, and executor support was nonexistent (and now, is still experimental). Now, 1.53 is ancient. Can anybody comment on these statements regarding boost::future::thread state in 1.59? In particular, suppose I have this: // Thread 1 boost::promise<int> pi; boost::future<int> fi = pi.get_future(); // pass pi to thread 2 somehow fi.then(....); // Thread 2 pi.set_value(100); And I want continuation to be executed in thread 1, assuming that thread 1 runs Qt event loop, allowing me to use QTimer::singleShot, or queued signal, or similar mechanism. How would I go about making boost::future do it? Has anybody done so? Thanks, Volodya

4 41