November 2014 - Boost - lists.preview.boost.org

[context] msvc /SAFESEH
by Jeff Flinn 12 Aug '15

12 Aug '15

I need to build my application with /SAFESEH which uses boost coroutine which uses context. I'm getting the following link errors: 1>libboost_context-vc100-mt-gd-1_53.lib(jump_i386_ms_pe_masm.obj) : error LNK2026: module unsafe for SAFESEH image. 1>libboost_context-vc100-mt-gd-1_53.lib(make_i386_ms_pe_masm.obj) : error LNK2026: module unsafe for SAFESEH image. I've built boost static libs with the same MSVC vesion and options (sans /SAFESEH as it's not a compile/lib option) Compiler/linker versions: Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 16.00.40219.01 for 80x86 Microsoft (R) Incremental Linker Version 10.00.40219.01 Has anyone run into this and resolved the error? Any insight is appreciated. Thanks, Jeff

3 9

[build] b2 headers broken?
by Eric Niebler 02 Mar '15

02 Mar '15

I just updated to the latest develop. I ran bootstrap, then nuked my boost directory and reran b2 headers. Worked fine. Then I changed directory to libs/proto/test and ran ../../../b2 mem_ptr to run a test. Here's what I get: f:\modular-boost\libs\proto\test>..\..\..\b2 mem_ptr Performing configuration checks - symlinks supported : no - junctions supported : yes - hardlinks supported : yes ...patience... ...patience... ...found 4951 targets... ...updating 441 targets... common.mkdir ..\..\..\bin.v2\libs common.mkdir ..\..\..\bin.v2\libs\proto common.mkdir ..\..\..\bin.v2\libs\proto\test common.mkdir ..\..\..\bin.v2\libs\proto\test\mem_ptr.test common.mkdir ..\..\..\bin.v2\libs\proto\test\mem_ptr.test\msvc-12.0 common.mkdir ..\..\..\bin.v2\libs\proto\test\mem_ptr.test\msvc-12.0\debug common.mkdir ..\..\..\bin.v2\libs\proto\test\mem_ptr.test\msvc-12.0\debug\link-static common.mkdir ..\..\..\bin.v2\libs\proto\test\mem_ptr.test\msvc-12.0\debug\link-static\threading-multi link.rm ..\..\..\boost\mpl common.mkdir ..\..\..\boost\mpl link.hardlink ..\..\..\boost\mpl\print.hpp Hardlink created for ..\..\..\boost\mpl\print.hpp <<===>> ..\..\mpl\include\boost\mpl\print.hpp <snip> link.rm ..\..\..\boost\numeric\conversion link.hardlink ..\..\..\boost\numeric\conversion\conversion_traits.hpp The system cannot find the path specified. if exist "..\..\..\boost\numeric\conversion\conversion_traits.hpp" del "..\..\..\boost\numeric\conversion\conversion _traits.hpp" mklink /H "..\..\..\boost\numeric\conversion\conversion_traits.hpp" "..\..\numeric\conversion\include\boost\numeric\ conversion\conversion_traits.hpp" ...failed link.hardlink ..\..\..\boost\numeric\conversion\conversion_traits.hpp... link.hardlink ..\..\..\boost\numeric\conversion\int_float_mixture_enum.hpp The system cannot find the path specified. For some reason, b2 thinks it needs to rerun b2 headers, but it does a crap job of it and dies. What's going on? Eric

4 6

Interactive metaprogramming shells
by Abel Sinkovics 28 Dec '14

28 Dec '14

Hi, I've built interactive shells for preprocessor and template metaprogramming. I've been using them for development and debugging of metaprograms and I think Boost developers could also find them useful. You can type in (metaprogramming) expressions which get evaluated and the result is displayed immediately. For example you can type boost::mpl::push_front<boost::mpl::vector<int, char>, double>::type and you get boost_::mpl::vector<double, int, char> as the result (the boost_ namespace is used because there are some tricks there to make the output more readable). As an example for the preprocessor shell you can type BOOST_PP_REPEAT(3, foo BOOST_PP_TUPLE_EAT(3), ~) and you get foo foo foo as the result. The tools are based on the Boost.Wave library and Clang. You can get them here: Preshell for preprocessor: https://github.com/sabel83/preshell Metashell for template metaprograms: https://github.com/sabel83/metashell You can also try them from your browser here: http://abel.web.elte.hu/shell Feedback is welcome. Regards, Ábel

6 16

file_descriptor::read() docs?
by Olaf van der Spek 19 Dec '14

19 Dec '14

Hi, Where is file_descriptor::read() documented? Shouldn't it be at http://www.boost.org/doc/libs/1_57_0/libs/iostreams/doc/classes/file_descri… ? -- Olaf

2 3

File Handle and FILE* wrappers?
by Olaf van der Spek 16 Dec '14

16 Dec '14

Hi, Would there be any interest in wrappers for file handles / descriptors and FILE*? Sometimes one needs native handles or FILE* for interoperability or special features like memory mapped IO, but standard C++ doesn't provide convenient RAII friendly wrappers for these. The idea seems trivial yet quite useful. I'm aware of <boost/iostreams/device/file_descriptor.hpp> but it seems to be too high-level. I've put a simple start for FILE* at https://code.google.com/p/xbt/source/browse/trunk/xbt/misc/xbt/cfile.h What do you think? Also posted at https://groups.google.com/a/isocpp.org/forum/#!topic/std-proposals/Q4RdFSZg… -- Olaf

8 21

[utility] What happened to OptionalPointee/compare_pointees?
by Mostafa 16 Dec '14

16 Dec '14

1) OptionalPointee/compare_pointees reside here: libs/utility/OptionalPointee.html, but there's no way to navigate to it from here: libs/utility/ or here: libs/utility/utility.htm 2) IMO, compare_pointees should have stand alone documentation, and be grouped with pointee and indirect_reference. 3) pointee and indirect_reference are not iterator specific, therefore they shouldn't reside under iterator's documentation. IMO, compare_pointees, pointee and indirect_reference should all reside under a pointee utilities section. Thanks.

1 1

[safe_numerics] questioning the basic idea
by Andrzej Krzemienski 15 Dec '14

15 Dec '14

Hi, I was going through the Safe Numerics library in Boost Library Incubator, and I realized I disagree with the basic idea it is built on. I wanted to rise my concerns here. If I were to summarize in one sentence what this library is, I would say: a drop-in replacement for type int that checks for overflow in run-time and throws an exception if it finds one. Did I get it right? The remainder of this post is based on this interpretation. If so, I am not sure if this idea is a good one and worth promoting in Boost. BTW this is one of my criteria for letting a library into Boost: whether it promotes worthy ideas. I agree with the statement that a program should be UB-free. But I do not think that the approach of letting the programmer do what he did before, having the library or some run-time tool check for potential UB, and throwing an exception instead makes the program any better (or safer). It is just hiding the symptoms but not curing the disease. The programmer should not plant the UB in the first place - I agree. But this is different than first doing the mess and then having the run-time clean it up for you. I know it works for many people, in a number of languages, and it may even be considered a practical solution, but (by inclusion into Boost) I wouldn't like to be sending the message "this is how you are suppose to code". I try to recall how I use type int. I do not think I ever use it for anything that would be close to "numeric" as I know the term from math. Use Case 1 (an index): for (size_t i = 0, I = v.size(); i != I; ++i) { if (i != 0) str += ","; str += v[i]; } There doesn't appear to be a good reason to wrap it into safe<int> here, even though the incrementation could possibly overflow. Plus, it would kill my performance. Use Case 2 (using reasonably small range): I used an int to represent a square on a chessboard. There is only 64 squares, so I couldn't possibly overflow, on whatever platform. And even if there exists a platform where 64 doesn't fit into an int, I would not use safe<int> there. I would rather go for something like double_int. If I were to use some numeric computations on integers and I perceived any risk that I may overflow, I would not be satisfied with having the computations stop because of an exception. I would rather use a bigger type (BigInt?). I do not think int is even meant to be used in numerical computations. I believe it is supposed to be a building block for building more useful types like BigInt. One good usage example I can think of is this. After a while of trying to chase a bug I comae up with a hypothesis that my int could be overflowing. I temporarily replace it with safe<int> and put a break point in function overflow() to trap it and support my hypothesis. I would probably use a configurable typedef then: #ifndef NDEBUG typedef safe<int> int_t; #else typedef int int_t; #endif But is this the intent? But perhaps it is just my narrow perspective. Can you give me a real-life example where substituting safe<int> for int has merit and is not controversial? I do not mean the code, just a story. Regards, &rzej

6 12

List of C++ 11 only Boost libraries and their status?
by Niall Douglas 13 Dec '14

13 Dec '14

For C++ Now 2015 I am intending to present an overview of C++ 11 only Boost libraries in the review queue or very near the review queue by the time of the conference. I'd appreciate help filling in missing gaps in this list: * Boost.Spirit X3 ETA to Boost review: unknown, last commit was June 2014. * Boost.Proto 0x ETA to Boost review: unknown, last commit was Oct 2013. * Boost.Hana ETA to Boost review: Summer 2015, last commit was today. * Boost.AFIO ETA to Boost review: Already in review queue, last commit was two days ago. * Boost.BindLib ETA to Boost review: Q1 2015, last commit was two days ago. * Boost.Spinlock ETA to Boost review: Q2 2015, last commit was four days ago. * Boost.KernelAlloc ETA to Boost review: Q1 2015, last commit was today. * Boost.Expected ETA to Boost review: no later than Summer 2015 probably much earlier, last commit was two weeks ago. * Boost.CRUX ETA to Boost review: hopefully by end of 2015, last commit was three days ago. I have to admit surprise at how long the list I have collected already is. Are there any other C++ 11 only Boost libraries I am missing, or have I got the ETAs wrong? Niall -- ned Productions Limited Consulting http://www.nedproductions.biz/ http://ie.linkedin.com/in/nialldouglas/

24 49

[coroutine] x86 msvc11 stack corruption
by Tobias Loew 12 Dec '14

12 Dec '14

Hi, I use Boost 1.55 uni-directional coroutines to build an x86 MSVC11 application. I have a simple pull-type (boost::coroutines::coroutine<void>::pull_type) that under certain reproducable conditions destroys the stack after returning from the coroutine. Here is the corrupted stack as shown by VS2012 > ebs2000.exe!CScriptMainFrame::DoRun(CPascalEditorDoc * 0x00000000, int 0x00000000, int 0x00000000) Line 3372 C++ ebs2000.exe!CScriptMainFrame::OnDebugStepover() Line 4916 C++ mfc110u.dll!_AfxDispatchCmdMsg(CCmdTarget *, unsigned int, int, void (void) *, void *, unsigned int, AFX_CMDHANDLERINFO *) C++ 00000002() Unknown [Frames below may be incorrect and/or missing] mfc110u.dll!CCmdTarget::OnCmdMsg(unsigned int, int 0x00000000, void *, AFX_CMDHANDLERINFO *) Line 364 C++ mfc110u.dll!CWnd::OnCommand(unsigned int 0x00018263, long 0x00000000) Line 2785 C++ mfc110u.dll!CFrameWnd::OnCommand(unsigned int 0x00018263, long 0x00000000) Line 389 C++ ... This only happens in windows x86 32-bit release-builds when the coroutine finishes upon a user-action that also includes a windows WM_SETFOCUS message on my menu-bar. If at least one of the following is true, the stack-corruption does NOT happen: - debug-build - x64 build - using a different pull-type, e.g. enum status_enum{...}; boost::coroutines::coroutine<status_enum>::pull_type - not returning form the coroutine, but pushing just before the end of the coroutine and swapping the pull-type-variable with a default constructed "not-a-coroutine" Even though I have a lot of workarounds, I still would like to know, why this happens. regards Tobias PS: I had to recompile ml /safeseh /c make_i386_ms_pe_masm.asm ml /safeseh /c jump_i386_ms_pe_masm.asm to get SAFESEH-libraries. -- View this message in context: http://boost.2283326.n4.nabble.com/coroutine-x86-msvc11-stack-corruption-tp… Sent from the Boost - Dev mailing list archive at Nabble.com.

2 3

[review] Last day for formal review for Sort library
by Edward Diener 12 Dec '14

12 Dec '14

Today is the last day for the formal review of the Sort library by Steven Ross, which started November 10. We have had some great discussions and reviews so far and I would like to thank everybody involved, but as always we need more formal reviews. If you need any delay for your review after today, please contact me at 'eldiener at tropicsoft dot com' and I will take your review into account if given within a reasonable period of time after today. About the Sort library ================== The Sort library is a library which implements hybrid sorting algorithms based on a Spreadsort ( http://en.wikipedia.org/wiki/Spreadsort ), of which the author of the library, Steven Ross, is the inventor. The algorithm provides a sort that is faster than O(n*log(n)). The library provides a generic implementation of high-speed sorting algorithms that outperform those in the C++ standard in both average and worst case performance. These algorithms only work on random access iterators. They are hybrids using both radix and comparison-based sorting, specialized to sorting common data types, such as integers, floats, and strings. These algorithms are encoded in a generic fashion and accept functors, enabling them to sort any object that can be processed like these basic data types. Where to get it =============== The library is available on github at https://github.com/spreadsort/sort. The library is in modular Boost format and can be cloned to libs/sort under your local modular boost directory. I have provided as the review manager online documentation at: http://eldiener.github.io/sort Review guidelines ================= Reviews should be submitted to the developer list (boost(a)lists.boost.org), preferably with '[sort]' in the subject. Or if you don't wish to for some reason or are not subscribed to the developer list you can send them privately to me at 'eldiener at tropicsoft dot com'. If so, please let me know whether or not you'd like your review to be forwarded to the list. For your review you may wish to consider the following questions: - What is your evaluation of the design? - What is your evaluation of the implementation? - What is your evaluation of the documentation? - What is your evaluation of the potential usefulness of the library? - Did you try to use the library? With what compiler? Did you have any problems? - How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? - Are you knowledgeable about the problem domain? And finally, every review should attempt to answer this question: - Do you think the library should be accepted as a Boost library? Be sure to say this explicitly so that your other comments don't obscure your overall opinion. Even if you do not wish to give a full review any technical comment regarding the library is welcome as part of the review period and will help me as the review manager decide whether the library should be accepted as a Boost library. Any questions about the use of the library are also welcome.

6 11