March 2012 - Boost - lists.preview.boost.org

Contributing to Boost Graph Library
by Sathyam Vellal 15 Mar '12

15 Mar '12

Hello. I would like to contribute to Boost Graph Library. I went through the http://www.boost.org/doc/libs/1_49_0/libs/graph/doc/challenge.html which is also included as one of the projects of SoC 2012. How do I begin? Thank you

2 2

[xpressive] Concatenating two regular expressions into one?
by Robert Dailey 15 Mar '12

15 Mar '12

I have the following function: bool MimeDocument::GetMimeHeaderData( PMIMEENTITY entity, MimeHeaderData& header_data ) { bool success = false; std::string headers; GetMimeEntityData( entity, MIME_ENTITY_DATA_HEADERS, headers ); using namespace boost::xpressive; sregex content_disposition_re = icase("Content-Disposition:") >> +_s >> (s1=!as_xpr("inline;")) >> -*_ >> "size=" >> (s2=+_d) >> ';' ; sregex content_id_re = icase("Content-ID:") >> +_s >> '<' >> (s1=+_) >> '>' ; smatch what; if( regex_search( headers, what, content_disposition_re ) ) { header_data.is_inline = what[1] == "inline;"; header_data.size = boost::lexical_cast<unsigned>( what[2] ); success = true; } if( regex_search( headers, what, content_id_re ) ) { header_data.content_id = what[1]; success = true; } return success; } Right now I use 2 sregex objects and search the MIME headers twice to find 2 different lines. Ideally I'd like to just use 1 regex and combine them, but I need to then somehow make it search between all lines, and then the order in which Content-Distribution and Content-ID appear in the headers may vary. Is it best to keep them separated like this, or can I concatenate the regular expressions into 1? --------- Robert Dailey

2 1

[git] neglected aspects
by Steven Samuel Cole 14 Mar '12

14 Mar '12

Hi all, First post here, so please bear with me. A lot has been said in the last year on the subject of a possible migration from svn to git. However, after reading pretty much every message on the issue on this list (sic!), I have the impression that some of the most important aspects did not get the consideration they require. I would therefore like to add my outside perspective. SUMMARY: 1. an svn --> git migration does cause some major, but one-time disruption. However, svn right now causes minor, but continuous disruption on a daily basis - which often goes unnoticed. 2. git's distributed concept is nothing less than one generation ahead of centralized VCSs like svn. The benefits usually do not become apparent until git is actually used in practice. 3. at the moment, boost is significantly missing out on fresh enthusiasm that new contributors could bring into the project; svn and the policies it mandates are partly too blame for that. 4. svn trunk (i.e. boost library) maintainers are too limited by the svn concept in their decision which changes they merge at what point in time and may be pressured into rushing suboptimal decisions; this can make maintenance work painful and frustrating. git greatly alleviates that problem. 5. IMO, it's not 'if', it is 'when'. The longer a migration is delayed, the longer boost development will be slowed down without even noticing. DETAILS: I am aware that some of my points technically are mentioned on the boost git wiki page at https://svn.boost.org/trac/boost/wiki/Git/WhyGit, but they still seem somewhat neglected. This is probably not surprising as many participants in the discussion 1. presumably are established boost contributors and thus share a 'from the inside' view of the subject and 2. are only marginally affected by svn's conceptual problems This is what happened here in the last couple of days: I needed a tool for a job in my current project and I couldn't find one, so I thought about what components I need to build my own. A little web research - Boost.Iostreams looks perfect for the purpose. You have all been through what comes next, be it with boost or with other open source software: Download the latest release, install the libraries, start reading the docs, run some sample code, etc. While reading, I spot a typo in an HTML doc, then another in an include file comment, a third one in another file... the fourth one at the latest makes me think - this is open source, I should sync the latest sources, fix all those typos as I come across them while reading and contribute them back to the project. A quick read on submitting bugs on boost.org, svn co yadi yadi, fix the typos locally. Of course I don't have write privileges to the repo, so the best I can do for now is create a patch and attach that to a bug report. Within minutes, someone takes care of the bug, comments and takes ownership. Excellent! Smithers, money fight! I go back to reading, find more typos. My patch has not been committed to the trunk yet, so my local changes are still sitting there on my local hard drive. If I do another svn diff > file_2.patch, the patch will also contain the changes I have already attached to the bug report. What are my options now ? Revert my changes, base the new ones on the head revision and send another patch ? Create a new patch file and manually remove the diffs of the old changes I already sent ? How will the upstream maintainer know which changes are based on what version ? Also, I notice a few other things that in my opinion could be done better to facilitate adoption of the iostreams library. I would be willing to do the work and I would in the perfect position as I am walking in the shoes of an adopter right now - but these are separate from the typo fixes and they are larger issues; considering I can't check my changes in, would I really want to have them sit on my local harddrive, waiting possibly for months for someone upstream to review and hopefully merge them ? A couple of hours later: I get an email from boost bugs/svn; the upstream maintainer has committed my changes. However, I actually receive not one, but two emails, because the upstream guy chose to split my patch into changes on documentation and changes on source code (which presumably required extra work on his part). I do an svn up and now have to deal with conflicts between my local changes and the new commits: I make a note of my second set of changes and overwrite my local files with the new repo versions, then bring the second set back in. Uff! That's a lot of work just to fix some typos! And these are just cosmetic issues in discrete chunks that do not require any testing; contributing changes to source code would take even more effort and more caution - build and test on several platforms, peer review, etc. Also, the upstream maintainer jumped on the bug report right away and integrated my changes within hours. This is the ideal situation (thanks again Daniel, great job! :-) - usually, things don't happen so quickly - especially around major release time. HOW THIS IS DONE IN GIT: 1. google 'github iostreams' --> click first search result: https://github.com/boost-lib/iostreams (this can be even reduced to 'gh: iostreams' by integrating github into chrome search engines, but that's another story...) 2. on githup website, click 'fork', wait a few seconds --> this auto-creates my personal online github iostreams repo 3. on my local machine, open a shell, enter 'git clone ', copy & paste the repo .git url shown on the website in there and run e.g. 'git clone git(a)github.com:<username>/iostreams.git' --> this creates a local fork of my personal online iostreams repo + the mailing list probably changes the line above to 'hidden' + there is github/desktop integration and a plethora of gui clients 4. i change local files and commit to the local repo. once a set of changes is complete, i push them online into my personal online repo; once my work has reached some maturity, I send a pull request to the upstream maintainer of the official iostreams repo, aka the keeper of the trunk. disclaimer: I have omitted one-time steps to set up local git, github.com account, ssh keys, lastpass integration, yadi yadi. these steps are abundantly documented online, done in minutes and required only once. THE GIT ADVANTAGE: I don't have to wait for the first set of changes to be merged into the trunk before I resync, resolve conflicts and base the second set on the new head revision; I simply create a new branch for a new change set and send a new pull request once my work is complete. The upstream maintainer has no peer pressure to merge any changes in: He/she is sitting on the head revision and is looking at a number of pull requests for change sets in various personal forks like mine; these are more like 'change offers' the maintainer is free to merge in if he/she so chooses (cherry-picking) - or postpone if this is not the time because for example a major release is due and they seem too risky. I as a contributor do not really care so much: Of course I am stoked if my work actually makes it into the project eventually, but the point in time when this happens technically does not matter to me - pending changes will not get in my way if the merge takes a little longer. This is the major difference between svn and git - and I can not stress this advantage enough: I am decoupled from, but still connected to the official trunk. I can make arbitrary changes and group them in any way I see fit. I offer them to upstream and move on to new development. As a side effect, this also provides an overview impression of quality and continuity of the work of a potential new contributor. Of course it is technically correct that svn also supports the concepts of forks and branches, but in terms of tooling and mentality, they are considered much more heavy-weight than in git and might get created a couple of times a year - while in git, they might come and go a couple of times a day. Finally, the 'series of tubes' metaphor IMO does not really hit it. Subversion to me seems more like a freight train where the waggons move at different speeds, so they constantly bump into the car behind and in front of them; movement of the entire train is jerky. Git on the other hand is a bunch of space ships linked by hyperelastic tractor beams: Even if one travels out as far as the delta quadrant, the upstream connection will always make sure the collective does benefit from any new development it brings back from there. [snipped several paragraphs about cultural and other aspects; maybe some other time.] # ssc

24 81

[random] Use of make_unsigned/make_signed
by John Maddock 14 Mar '12

14 Mar '12

Several of the random number distributions use make_[un]signed internally. However, this trait is not intended as a customization point for UDT's - it's only supposed to be instantiated for integer or enum types - and yes that's a deliberate decision that's now enshrined in the standard ;-) Unfortunately this means that these distributions can't be instantiated on UDT's - big number types for example. Since it seems that these traits are only used to obtain a type that is large enough to store a difference between the endpoints of a range, would it be possible for these to change to use something like: namespace boost{ namespace random{ template <class T> struct range_type : public make_signed<T> { }; }} Then range_type could be [partially-] specialized for UDT's. Note that for some types, there might simply not be a corresponding unsigned type at all, but I'm assuming that doesn't foul up the logic, as long as the type is wide enough? Comments? Thanks, John.

2 1

[random] independent_bits_engine
by John Maddock 14 Mar '12

14 Mar '12

Am I correct in thinking that the independent_bits_engine produces a uniform distribution? I'm interested in using it with arbitrary precision integers to produce B-bit random numbers for the record, Thanks, John.

2 1

Is there interest in static code analysis?
by Antony Polukhin 14 Mar '12

14 Mar '12

Because of some interest on this topic, I would like to clarify some things: Of course you can have some trial version and use it by yourself, BUT more mature solution would be to find a "boost's liason contact". This contact will interact with the company, provide access to reports for developers. In that case all developers can get access to reports without downloading/installing the trial version and use static analysis tool for a longer time. That case will also require from a "boost's liason contact" to look carefully through the license for that tool and agree to it as a maintainer of a whole boost project (I am not permitted to take such solutions). Best regards, Antony Polukhin

3 6

As of 1.49, I am completely unable to build boost with PDB files using VS2010
by Michael Goldshteyn 14 Mar '12

14 Mar '12

Whatever changes were made in 1.49 made it impossible for me to build a debug version of the boost libraries with PDB files. I am using the following command line: ----- bootstrap b2 --without-mpi --without-python --build-dir=vc100-bld-64-bit --build-type=complete --toolset=msvc-10.0 --stagedir=64-bit-vc100 debug-symbols=on debug-store=database ----- I am getting errors like: libs\math\build\..\src\tr1\assoc_laguerre.cpp(6) : error C2858: command-line option 'program database name (/Fde:\dev\devel\libs\boost\boost_1_49_0\vc100-bld-64-bit\boost\bin.v2\libs\math\build\msvc-10.0\debug\debug-store-database\link-static\runtime-link -static\libboost_math_tr1-vc100-sgd-1_49.pdb)' inconsistent with precompiled header, which used '/Fde:\dev\devel\libs\boost\boost_1_49_0\vc100.pdb' libs\math\build\..\src\tr1\assoc_laguerre.cpp(6) : error C2859: e:\dev\devel\libs\boost\boost_1_49_0\vc100-bld-64-bit\boost\bin.v2\libs\math\build\msvc-10.0\debug\debug-store-database\link-static\runtime-link-static\libboost_math_tr1-vc100-sgd-1_49.pdb is not the pdb file that was used when this precompiled header was created, recreate the precompiled header. I've tried turning off precompiled headers using pch=off, but still get errors preventing me from building. I have to completely remove the debug-store=database build option to get a build, but then I have no PDB files at all for the boost libraries. Thanks for any help, Michael Goldshteyn

2 1

GSoC 2012
by Devashish Tyagi 14 Mar '12

14 Mar '12

Hello, I am Devashish Tyagi, an Undergraduate Student of Computer Science and Engineering at Indian Institute of Technology, Delhi. I am currently in my Third Year. I have a considerable experience of coding in C++ and strong background in the field of Algorithms. I would like to be part of Boost C++ Library for GSoC 2012. I went through the Ideas page here<https://svn.boost.org/trac/boost/wiki/SoC2012>. I would like to extend Boost.Graph by implementing the requests mentioned on this page<http://www.boost.org/doc/libs/1_49_0/libs/graph/doc/challenge.html>. Among the Challenges mentioned, I am particularly interested in implementing Dynamic Graph Algorithms and a minimum cost maximum flow Algorithm. Could someone guide me as to from where should I begin my research and Is there a priority order among the requests/challanges mentioned on this page<http://www.boost.org/doc/libs/1_49_0/libs/graph/doc/challenge.html>. Regards -- Devashish Tyagi 2nd Year Undergraduate Computer Science and Engineering Dept.

1 0

Boost.Build maintenance
by Bruno Santos 14 Mar '12

14 Mar '12

Hi, I been submitting some patches in trac, but I noticed there's no activity there for boost.build. Since I use boost.build extensively and I would like to volunteer as maintainer for it. Regards, Bruno

3 2

[xpressive] Compiler error; seems like normal usage?
by Robert Dailey 13 Mar '12

13 Mar '12

My regex is as follows: sregex re = "Content-Disposition:" >> +_s >> (s1=!"inline;") >> -*_ >> "size=" >> (s2=+_d) >> ';' ; This seems to be the part causing the compiler errors: (s1=!"inline;") When I change it to this: !(s1="inline;") It compiles just fine. I'm on VS2008 SP1. Anyone know why the former usage does not work? I still want the group to capture an empty string if the string "inline;" does not match, which is why I put the ! inside the capture group. Does this matter? --------- Robert Dailey

3 3