February 2010 - Boost - lists.preview.boost.org

[#pragma once]
by Sid Sacek 18 Nov '12

18 Nov '12

I've worked with the MSVC, Sun and GCC compilers. Each one of them supports #pragma once. Is there any reason to wrap this pragma within #ifdefs? Are there any compilers out there today that don't support this #pragma? #if defined( _MSC_VER ) && ( _MSC_VER >= 1020 ) # pragma once #endif Could we change this coding pattern so that it no longer looks like MSVC is being selfish? -Sid Sacek

17 20

[interprocess] message_queue hangs when another process dies
by Sergei Politov 03 Nov '11

03 Nov '11

Hi, I have found the following problem with message_queue on win32 (MSVC 2008 + Windows Vista). Suppose we have 2 processes, one sends messages to queue, another reads them. When reading process dies (for instance using End process) during message_queue.receive the another process hangs in send. As I found during investigation, it tries to lock interprocess mutex, but it is already locked by dead process. So this message queue instance becomes unusable. I attached the example. Steps to reproduce: 1) Start "mq.exe s" (i.e. with argument s) It outs: sender: $PID 2) Start mq.exe without arguments. It outs: receiver: $PID 0 1 2 3 4 This time sender outs: send done: 3) At this point the message queue is empty and receiver waits for messages. End it with Task Manager. 4) Enter some number in sender console and press Enter. 5) The sender hangs in message_queue.send Best Regards, Sergei

6 13

Re: [boost] [date_time] Time zone improvements
by Rutger ter Borg 25 May '11

25 May '11

Jeff Garland wrote: > Very cool :-) One question -- is there a portable solution where a user > could deploy a files onto a Windows system or is it a Unix only solution? > I'm fine with incorporating a *nix only solution because what your > suggesting will be a nice solution for *nix platforms, but it will need to > be clear that it's not portable. I don't see why it wouldn't be possible to deploy the (big-endian) binary files to any platform. Getting it into this binary form (using zone info compiler zic) may be harder to do cross-platform, but cygwin may help here. [snip] > As the primary maintainer of Boost date-time I can say with certainty that > there is interest in this functionality -- it's long been on my todo list > and I haven't had time to get to it. You can email me privately and we > can discuss all the details of how to get your code incorporated. I'll do! Regards, Rutger

5 9

[serialization] boost/serialization/path.hpp
by Johan Råde 21 Feb '11

21 Feb '11

There is no boost/serialization/path.hpp. I suggest the following: ---------------------------------------------------------------------------------------------------------------- #ifndef BOOST_SERIALIZATION_PATH_HPP #define BOOST_SERIALIZATION_PATH_HPP // MS compatible compilers support #pragma once #if defined(_MSC_VER) && (_MSC_VER >= 1020) #pragma once #endif #include <boost/config.hpp> #include <boost/filesystem/path.hpp> #include <boost/serialization/level.hpp> BOOST_CLASS_IMPLEMENTATION(boost::filesystem::path, boost::serialization::primitive_type) #ifndef BOOST_NO_STD_WSTRING BOOST_CLASS_IMPLEMENTATION(boost::filesystem::wpath, boost::serialization::primitive_type) #endif namespace boost { namespace serialization { template<class Archive, class String, class Traits> void serialize(Archive& ar, boost::filesystem::basic_path<String, Traits>& p, const unsigned int version) { String s; if(Archive::is_saving::value) s = p.string(); ar & boost::serialization::make_nvp("string", s); if(Archive::is_loading::value) p = s; } }} #endif //-------------------------------------------------------------------------------------------------------------- Comments? Any suggested improvements? --Johan Råde

5 11

[C++0x] Emulation of scoped enums
by Beman Dawes 16 Feb '11

16 Feb '11

The improved type safety of the C++0x scoped enum feature is attractive, so I'd like to start using it as it becomes available in compilers. See http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2347.pdf for a description. Note that the committee changed the name from strongly typed enums to scoped enums. See the attached for a boost/detail header that provides macro wrappers that use scoped enums if available, otherwise fall back on C++03 namespaces and unscoped enums. It lets a library write: BOOST_SCOPED_ENUM_START(algae) { green, red, cyan }; BOOST_SCOPED_ENUM_END ... BOOST_SCOPED_ENUM(algae) sample( algae::red ); void func(BOOST_SCOPED_ENUM(algae)); and then a user can write: sample = algae::green; func( algae::cyan ); Comments or suggestions appreciated, --Beman // scoped_enum_emulation.hpp ---------------------------------------------------------// // Copyright Beman Dawes, 2009 // Distributed under the Boost Software License, Version 1.0. // See http://www.boost.org/LICENSE_1_0.txt // Generates C++0x scoped enums if the feature is present, otherwise emulates C++0x // scoped enums with C++03 namespaces and enums. The Boost.Config BOOST_NO_SCOPED_ENUMS // macro is used to detect feature support. // // Caution: only the syntax is emulated; the semantics are not emulated and // the syntax emulation doesn't include being able to specify the underlying type. // // See http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2347.pdf for a // description of the feature. Note that the committee changed the name from // strongly typed enums to scoped enums. // // Sample usage: // // BOOST_SCOPED_ENUM_START(algae) { green, red, cyan }; BOOST_SCOPED_ENUM_END // ... // BOOST_SCOPED_ENUM(algae) sample( algae::red ); // void foo( BOOST_SCOPED_ENUM(algae) color ); // ... // sample = algae::green; // foo( algae::cyan ); #ifndef BOOST_SCOPED_ENUM_EMULATION_HPP #define BOOST_SCOPED_ENUM_EMULATION_HPP #include <boost/config.hpp> #ifndef BOOST_NO_SCOPED_ENUMS # define BOOST_SCOPED_ENUM_START(name) enum class name # define BOOST_SCOPED_ENUM_END # define BOOST_SCOPED_ENUM(name) name #else # define BOOST_SCOPED_ENUM_START(name) namespace name { enum enum_t # define BOOST_SCOPED_ENUM_END } # define BOOST_SCOPED_ENUM(name) name::enum_t #endif #endif // BOOST_SCOPED_ENUM_EMULATION_HPP

14 27

[process] How to run test cases
by Boris 23 Jan '11

23 Jan '11

As Boost.Process 0.3 has been released it would be great if the test cases are run on various platforms. So far I've tested Boost.Process on WinXP with MSVC 9.0, Cygwin with g++ 3.4.4 and Solaris with g++ 3.4.6 and Sun C++ 5.9. To make it as easy as possible for others to run the test cases here's a short description of how to proceed. Nearly all test cases depend on a program called "helpers". This program is built first and is started by many test cases as a child process. In order to find the program "helpers" the test cases must know its location. As there is no way to get the location at runtime it is hardcoded in the file libs/process/test/misc.hpp. As the location differs depending on what compiler is used YOU MUST CHECK FIRST THE PATH IN libs/process/test/misc.hpp! Otherwise most of the test cases will fail as they look for a program "helpers" in the wrong directory. As of today only those paths are correct and have been tested which are set for Windows, Cygwin and Solaris. Only after you have checked and maybe updated the path in libs/process/test/misc.hpp you should try to build and run the test cases: WinXP/MSVC 9.0 ************** With MSVC 9.0 you only need to open the Visual Studio 2008 Command Prompt, change to the directory with the test cases and run bjam: C:\boost_1_36_0\libs\process\test> ..\..\..\bjam.exe -q Cygwin/GCC 3.4.4 **************** On Cygwin it's important to know if the Boost libraries have been built for the POSIX or Windows API. By default Boost libraries on Cygwin use the Windows API. With the Windows API the Boost.Process test cases are not passed successfully though (there are compiler errors where I'm not sure currently if they are a Boost.Process problem and how they could be fixed). If you want to run the test cases on Cygwin you must (re-)build the Boost libraries to use the POSIX API: $ cd ~/boost_1_36_0 $ ./bjam cxxflags=-DBOOST_POSIX_API Afterwards you can run the test cases: $ cd ~/boost_1_36_0/libs/process/test $ ../../../bjam cxxflags=-DBOOST_POSIX_API -q Solaris/GCC 3.4.6 ***************** At first you have to put the following line in ~/user-config.jam: using gcc : : : <linker-type>sun ; Then start building the Boost libraries: $ cd ~/boost_1_36_0 $ ./bjam --toolset=gcc cxxflags=-mcpu=ultrasparc For the test cases to be passed successfully you must update Boost.Test. Change line 624 in ~/boost_1_36_0/boost/test/impl/execution_monitor.ipp temporarily to: - , m_CHLD_action( SIGCHLD, catch_system_errors, attach_dbg, alt_stack ) + , m_CHLD_action( SIGCHLD, false, attach_dbg, alt_stack ) It is important that the second parameter is false as the signal SIGCHLD should not be handled by the execution monitor and should not be reported as an error. Afterwards the test cases can be run: $ cd ~/boost_1_36_0/libs/process/test $ ../../../bjam --toolset=gcc cxxflags=-mcpu=ultrasparc -q Solaris/Sun C++ 5.9 ******************* Build the Boost libraries with the sun toolset: $ cd ~/boost_1_36_0 $ ./bjam --toolset=sun stdlib=sun-stlport For the test cases to be passed successfully you must update Boost.Test. Change line 624 in ~/boost_1_36_0/boost/test/impl/execution_monitor.ipp temporarily to: - , m_CHLD_action( SIGCHLD, catch_system_errors, attach_dbg, alt_stack ) + , m_CHLD_action( SIGCHLD, false, attach_dbg, alt_stack ) It is important that the second parameter is false as the signal SIGCHLD should not be handled by the execution monitor and should not be reported as an error. If you run the test cases now you'll get this compiler error for one test case: "../../../boost/asio/detail/socket_ops.hpp", line 218: Error: Cannot assign void* to char*. "../../../boost/asio/detail/socket_ops.hpp", line 229: Error: Cannot assign void* to char*. "../../../boost/asio/detail/descriptor_ops.hpp", line 66: Error: Cannot assign void* to char*. "../../../boost/asio/detail/descriptor_ops.hpp", line 72: Error: Cannot assign void* to char*. The bug has been reported to the Boost.Asio mailing list. If you want to build that one test case, too, you need to fix the two files in Boost.Asio 1.36.0 yourself. All the test cases can be built and run with: $ cd ~/boost_1_36_0/libs/process/test $ ../../../bjam --toolset=sun stdlib=sun-stlport -q

4 9

boost::thread compiler error on SUN CC 5.9
by Urs Stotz 08 Jun '10

08 Jun '10

boost::thread give a compile error on SUN CC 5.9: /opt/SUNWspro/bin/CC +d -library=stlport4 -library=stlport4 -xcode=pic32 -erroff=wvarhidemem,hidevf,hidevfinvb -errtags=yes -features=tmplife -features=tmplrefstatic -g -mt -erroff=%none -KPIC -DBOOST_ALL_NO_LIB=1 -DBOOST_THREAD_BUILD_DLL=1 -DBOOST_THREAD_POSIX -I"." -c -o "bin.v2/libs/thread/build/sun-5.9/debug/stdlib-sun-stlport/threading-multi/pthread/thread.o" "libs/thread/src/pthread/thread.cpp" "libs/thread/src/pthread/thread.cpp", line 77: Error, badbinaryop: The operation "boost::shared_ptr<boost::detail::tss_cleanup_function> && void*" is illegal. "libs/thread/src/pthread/thread.cpp", line 588: Error, badbinaryop: The operation "boost::shared_ptr<boost::detail::tss_cleanup_function> || void*" is illegal. 2 Error(s) detected. make: *** [thread.o] Error 2 with this small patch it will compile: --- boost_1_42_0.org/libs/thread/src/pthread/thread.cpp 2009-10-19 11:18:13.000000000 +0200 +++ boost_1_42_0/libs/thread/src/pthread/thread.cpp 2010-02-10 13:48:25.037748000 +0100 @@ -74,7 +74,7 @@ namespace boost { current=next; ++next; - if(current->second.func && current->second.value) + if(current->second.func && (current->second.value != 0)) { (*current->second.func)(current->second.value); } @@ -585,7 +585,7 @@ namespace boost { (*current_node->func)(current_node->value); } - if(func || tss_data) + if(func || (tss_data != 0) ) { current_node->func=func; current_node->value=tss_data;

3 2

Help with VeecoFTC - exception - cloning_test / msvc-9.0~wm5~stlport5.2
by Emil Dotchevski 24 Apr '10

24 Apr '10

Can someone help me figure out what's going on here: http://tinyurl.com/ybpbsp4 Thanks! Emil Dotchevski Reverge Studios, Inc. http://www.revergestudios.com/reblog/index.php?n=ReCode

3 5

[RangeEx] Where is the current version?
by Mathias Gaunard 19 Apr '10

19 Apr '10

Where is the current version (or a fairly recent version) of RangeEx? I can't find anything on the trunk, the sandbox or the vault.

5 13

[asio] read_until -- possibly misleading documentation?
by Richard Smith 15 Apr '10

15 Apr '10

The documentation for Boost.ASIO (which is otherwise very comprehensive) says of the boost::asio::read_until set of overloads: | Read data into a streambuf until a delimiter is | encountered. <http://www.boost.org/doc/libs/1_35_0/doc/html/boost_asio/reference/read_unt…> What the function actually does is to read blocks of data into the streambuf, and stop when the delimiter is found. This means that frequently data beyond the delimiter will be read into the streambuf. (And this is elaborated in more detail on the individual function's pages, if a reader looks there.) I appreciate that this behaviour is compatible with the documentation, but someone less familiar with ASIO could easily assume that the function will read as far as the delimiter and no further. (And I have just spent a fair amount of time debugging a piece of code where the author had made this assumption.) Could we change the summary documentation to read something like: | Read data into a streambuf at least until a delimiter is | encountered. The implementation may read beyond the | delimiter, but will not block when doing so. While I'm on the subject of ASIO documentation, I can't see any documentation on whether the service_name parameters to the basic_resolver_query constructors are allowed to be port numbers (e.g. "80") or whether they have to be symbolic names (e.g. "http"). Port numbers work, at least on Linux, but it's not clear whether this is something that I should be relying on. Similarly for IPv4 and IPv6 addresses in the host_name parameter. Richard Smith

3 2