May 2009 - Boost - lists.preview.boost.org

[smart_ptr] boost::auto_ptr?
by Preston A. Elder 06 May '09

06 May '09

I was wondering if the maintainer of the smart pointers could create an analogue to auto_ptr in the boost namespace. Specificlly to allow the addition of a deallocator like that which exists in shared_ptr? Right now, none of std::auto_ptr, shared_ptr or scoped_ptr will quite fit this niche. - std::auto_ptr - always uses delete ptr; There not only no standard way to supply an allocator, but also no way to specify a one-off deleter. - scoped_ptr - is noncopyable (by design), I want to use it like an auto_ptr. - shared_ptr - has more overhead for thread safety and multiple usage concerns than is desired in this circumstance. Not to mention that it doesn't function like auto_ptr ('nullifying' after operator=). Quite simply, I'd love to do: boost::auto_ptr<MyClass> obj(ptr, deleter); Just like I can with boost::shared_ptr, and use it like regular std::auto_ptr. Can someone add this to boost? Pretty please? :) Incidentlly, I have another question, about enable_shared_from_this. Will this play well with a regular shared_ptr? For example - say I have MyClass and MyOtherClass. MyClass is going to invoke a function on MyOtherClass that will cause MyOtherClass to store the shared_ptr. For example: class MyClass { public: void foo(MyOtherClass &moc) const { moc.foo(shared_from_this()); } }; class MyOtherClass { shared_ptr<MyClass> mc; public: void foo(const boost::shared_ptr<MyClass> &in) { mc = in; } }; If I did: shared_ptr<MyClass> mc(new MyClass); MyOtherClass moc; mc->foo(moc); Ignoring the abserdity of the example (obviously real-life situations would be much more complex), would the mc and moc.mc shared ptr's be in sync? would they play nice together? or would there be chaos and destruction? What if I instead did: MyClass *tmp = new MyClass; shared_ptr<MyClass> mc(tmp->shared_from_this()); Would that fix the above if the above is a problem? I am curious, because right now, I have several instances where I am making constructors private, adding a weak_ptr to a class and adding a static create() function that takes the constructor arguments. Then my create() function will construct the object, putting it in a shared_ptr, then initialize the weak_ptr from the newly created shared_ptr, and then return the shared_ptr - all of this is quite cumbersome. Thanks, PreZ :)

1 1

[aligned storage] support for empty storage
by Thorsten Ottosen 06 May '09

06 May '09

Hi all, Currently the following fails: typedef boost::aligned_storage< 0, 4u > storage; storage s; because this will try to create an empty array. Does anybody have anything against adding the following specialization: template< std::size_t alignment_ > struct aligned_storage_imp<0u,alignment_> { /* intentionally empty */ }; Also, I would like to derive from aligned_storage_imp to get the EBO: template < std::size_t size_ , std::size_t alignment_ = std::size_t(-1) > class aligned_storage : private detail::aligned_storage::aligned_storage_imp<size_, alignment_> { ... } The above changes enable the following program typedef boost::aligned_storage< 0, 4u > storage; struct simple : storage { int i; }; #include <iostream> int main() { std::cout << sizeof(storage) << " " << sizeof(simple); } to output "1 4" instead of "1 8" on gcc. In case your are wondering, then I need this functionality in boost::auto_buffer to get rid of the extra word when the stack-buffer is empty (thus making auto_buffer as small as vector). Comments? -Thorsten

2 4

BOOST_ASSERT_IF() [again]
by Thorsten Ottosen 06 May '09

06 May '09

Hi Everyone, Does anyone oppose that I add this macro to supplement BOOST_ASSERT()? It's defined simply as #define BOOST_ASSERT_IF(IF,X) BOOST_ASSERT( (!(IF)) || (X) ) I think it renders assertions somewhat easier to read. -Thorsten

3 3

inline specifier within in class definition
by Mateusz Loskot 05 May '09

05 May '09

Hi, Could anyone explain why some static member functions defined within class definitions are specified with inline keyword? For instance, in boos/serialization/export.hpp template <class Archive, class Serializable> struct export_impl { ... inline static void enable_load(mpl::false_) {} inline static void enable_save(mpl::false_) {} }; AFAIU what the C++ Standard says in chapter "9.3 Member functions", it should be enough to define a member function in its class definition, "in which case it is an inline member function". On the other side, the standard also uses this technique, for instance in example presented in "18.2.1.5 numeric_limits specializations". I'm having problem with catching what's the rationale of using extra inline specifier. I was trying to find answer in the guidelines, but it seems it isn't explained. Best regards, -- Mateusz Loskot, http://mateusz.loskot.net Charter Member of OSGeo, http://osgeo.org

6 10

Reviewer needed for a C++ committee paper candidate
by joaquin＠tid.es 05 May '09

05 May '09

Hello, My excuses is this is slightly OT, but I think it touches with issues definitely of the interest of the Boost community. I'd like to send a paper to the C++ committe, a revision of the already sent http://www.open-std.org/JTC1/sc22/wg21/docs/papers/2009/n2820.pdf and would appreciate if some volunteer with interest in and knowledge on the subject matter can review it. If you're such a volunteer please contact me privately and I'll send you the doc. Thank you, Joaquín M López Muñoz Telefónica, Investigación y Desarrollo

1 0

Boost.Python def and member function overloads
by Matt Calabrese 05 May '09

05 May '09

I attended Troy Straszheim's Icefishing for Neutrinos Boostcon session today, which was a great talk on Boost.Serialization and Boost.Python in a very interesting context. I have not worked with Boost.Python in practice, having only skimmed the documentation, but was amazed at just how powerful and easy to use it is. However, in his examples, he included exposing classes from C++ that have member functions with multiple overloads and noted that it is somewhat cumbersome due to the fact that you have to explicitly cast your member function pointers when calling .def. For a type "your_type" with a member function "foo" having two overloads, one that takes an int, and another that takes an int and a float, the current syntax comes down to something along the lines of: /*class_ specification here */ .def( "foo", static_cast< void (your_type::*)(int) >(&your_type::foo)) .def( "foo", static_cast< void (your_type::*)(int, float) >(&your_type::foo)) ; Disambiguation is obviously necessary here, but I wonder if it could be handled in a much simpler way such as to avoid explicitly casting or even the explicit use of member function pointer types at all. I propose doing this by allowing users to explicitly pass in a non-member function type as a template argument to def, using a metafunction to translate that type to the appropriate member function type, and having that calculated type be the 2nd parameter type of the function. The suggested syntax would be something along the lines of: /*class_ specification here */ .def< void(int) >( "foo", &your_type::foo ) .def< void(int,float) >( "foo", &your_type::foo ) ; which I feel would be a significant simplification of use and should not be difficult at all to implement (just detect if the first template argument to def is a function type and if so do the appropriate transformation to yield the 2nd function parameter type, otherwise have it work like existing definitions). Would this be a feature that people find useful and be worth pursuing? -- -Matt Calabrese

2 1

[thread] boost::shared_mutex vs. pthread_rwlock_unlock
by Rush Manbert 05 May '09

05 May '09

I am replacing a pthread threading implementation with a boost threads implementation so I can use the code on Windows. There is a ReadWriteMutex class that has the following declaration: class ReadWriteMutex { public: ReadWriteMutex(); virtual ~ReadWriteMutex() {} // these get the lock and block until it is done successfully virtual void acquireRead() const; virtual void acquireWrite() const; // these attempt to get the lock, returning false immediately if they fail virtual bool attemptRead() const; virtual bool attemptWrite() const; // this releases both read and write locks virtual void release() const; private: class impl; boost::shared_ptr<impl> impl_; }; Note the release() method that works for a thread that holds either the read or write lock. My implementation uses boost::shared_mutex. acquireRead calls lock_shared(), acquireWrite calls lock(), attemptRead calls try_lock_shared(), attemptWrite calls try_lock, and release calls ??????? AFAICT there is no equivalent to the pthread_rwlock_unlock() call that the original version of release() called. Am I missing something? Thanks, Rush

2 1

[1.39.0] Confusing directions in bootstrap.sh
by Jeffrey Bosboom 05 May '09

05 May '09

I used the --libdir= and --includedir= options when invoking bootstrap.sh. When bootstrap.sh finishes, it says to run './bjam', but when I did so, it didn't use the libdir and includedir I specified. Only when I ran './bjam install' did it do what I expected. I think bootstrap.sh should be changed to indicate that the 'install' argument is necessary. --Jeffrey Bosboom

2 2

[PATCH] Typo in bootstrap.sh
by Matthew L. Creech 05 May '09

05 May '09

Boost fails to install when LIBDIR isn't specified explicitly and isn't "/lib", due to a typo in bootstrap.sh. Trivial patch below. --- diff -purN orig/bootstrap.sh boost_1_39_0/bootstrap.sh --- orig/bootstrap.sh 2009-05-04 16:09:39.000000000 -0400 +++ boost_1_39_0/bootstrap.sh 2009-05-04 16:10:25.000000000 -0400 @@ -249,7 +249,7 @@ if test "x$EPREFIX" = x; then fi if test "x$LIBDIR" = x; then - LIBDIR="$EXPREFIX/lib" + LIBDIR="$EPREFIX/lib" fi if test "x$INCLUDEDIR" = x; then -- Matthew L. Creech

2 1

[iterator] std::sort on zip_iterator
by Jeremiah Willcock 05 May '09

05 May '09

(Resubmitting to Boost list because I did not receive any answers on boost-users.) I would like to sort two separate vectors of numbers, treating corresponding elements of the two vectors as tuples and sorting the tuples. In particular, I am only comparing the first elements of the tuples; that may or may not be relevant to my problem. An example program is: #include <vector> #include <algorithm> #include <iostream> #include <boost/tuple/tuple.hpp> #include <boost/iterator/zip_iterator.hpp> struct compare_first_elements_in_tuples { template <typename Tuple> bool operator()(const Tuple& a, const Tuple& b) const { return (a.template get<0>()) < (b.template get<0>()); } }; int main(int, char**) { size_t a_data[5] = {0, 2, 1, 2, 4}; size_t b_data[5] = {1, 1, 5, 3, 7}; std::vector<size_t> a(a_data, a_data + 5); std::vector<size_t> b(b_data, b_data + 5); std::cout << "Before:"; for (size_t i = 0; i < a.size(); ++i) { std::cout << " (" << a[i] << ", " << b[i] << ")"; } std::cout << std::endl; typedef std::vector<size_t>::iterator vec_iter; typedef boost::zip_iterator<boost::tuple<vec_iter, vec_iter> > zip_iter; std::sort(zip_iter(boost::make_tuple(a.begin(), b.begin())), zip_iter(boost::make_tuple(a.end(), b.end())), compare_first_elements_in_tuples()); std::cout << "After:"; for (size_t i = 0; i < a.size(); ++i) { std::cout << " (" << a[i] << ", " << b[i] << ")"; } std::cout << std::endl; return 0; } On gcc 4.0.1, the sort operation results in the element (2, 1) (a pair of corresponding elements in a and b) being duplicated, while the element (1, 5) does not appear in the result at all: Before: (0, 1) (2, 1) (1, 5) (2, 3) (4, 7) After: (0, 1) (2, 1) (2, 1) (2, 3) (4, 7) I suspect the problem is related to the fact that zip_iterator does not return a "real" reference when dereferenced. Am I mistaken about this? Is the code above supposed to work? If not, is there an alternative way to sort one sequence while swapping elements in another in a corresponding way? I am not able to join the two input sequences into a single sequence of pairs because of other factors in the use case for this code. Thank you for your help. -- Jeremiah Willcock

2 1

[interprocess][circular_buffer] specialized containers should have container template argument
by Thorsten Ottosen 04 May '09

04 May '09

Hi Ion and Jan, I often use these containers: flat_set, flat_map and circular_buffer. They are great. However, we can make them faster if you allow a new template argument. For example template < class T, class Alloc, class Buffer = /* some default */ > class circular_buffer; template < typename T, typename Pred, typename Alloc class PushBackContainer = /* some default */ > class flat_set; My motivation is that these can perform somewhat better e.g. with an array (for circular_buffer), or auto_buffer (for flat_set/flat_map). I think even some very simply array wrapper would be useable with flat_set. The EA STL implementation has this features. What do you think? -Thorsten

4 5

Re: [boost] The noexcept Specifier & Block
by Anders Dalvander 04 May '09

04 May '09

Posted the following to std.lang.c++, cross-posting here, mostly directed to David Abrahams: After reading N2855 - Rvalue References and Exception Safety (http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2855.html) I'm still not confident that a new keyword `noexcept` would be optimal. Especially when the proposal combines this new keyword with a somewhat enhanced version of the already existing exception specification `throw(...)` to explicitly indicate that a move constructor or a destructor may throw exceptions. And at the same time propose to deprecate exception specifications altogether. I think that it would be better to use a simplified exception specification: - `throw()` to indicate that a function does not throw any exception, which is statically checked by the compiler. This would behave as `noexcept` in the N2855 proposal. - `throw(...)` to indicate that a function may throw any exception. Main use for throwing move constructors and throwing destructors. - Any other exception specification would be ill-formed and thus would require a compiler diagnostic. Update the new exception specification to behave as `noexcept` in N2855, where needed. Unfortunately I don't have a really good idea to implement something similar to the `noexcept` block as described in N2855. Perhaps a `try` block without a `catch` handler, perhaps someone else has a better idea? double sqrt(double); // may throw exceptions void f(double &x) throw() { if (x > 0) { x = sqrt(x); // ill-formed: sqrt(x) might throw an exception! } } void g(double &x) throw() { if (x > 0) { try { x = sqrt(x); } // okay: if sqrt(x) throws, invokes undefined behavior } } Rationale: - Exception specification as of C++98/C++03 are considered broken and discouraged. No need to deprecate, remove it entirely. - `throw()` is already used by a lot of libraries, for example boost, to indicate nothrow functions. With this proposal these functions would behave as `noexcept` with no change. - No new keywords are needed. Remove the following: exception-specification: throw ( [type-id-list]opt ) type-id-list: type-id type-id-list , type-id Add the following: no-throw-exception-specification: throw ( ) any-throw-exception-specification: throw ( ... ) What do you think? Regards, Anders Dalvander

1 0

[Review Results] Range.Ex library accepted into boost
by Thorsten Ottosen 04 May '09

04 May '09

Dear all, It is my pleasure that Neil Groves' RangeEx library has been accepted into boost. Congratulations Neil! There are quite a number of minor issues that need to be resolved before the library is release ready, see below for a summary. Review statistics ----------------- Full Reviews: 8. Discussion: extensive. I had the clear impression that everybody that participated in the discussion were in favor of this library, albeit they did not have time to submit a full review. I did not hear a single statement saying that this library should be rejected. Thanks to everybody that participated in the review and its discussions. Issue Summary ------------- Below is given a list of topics that must be adressed before the library can be included into boost. In general, we should try to discuss them one at a time in seperate threads. Many people suggested various extensions, new algorithms (e.g. from adope), etc. **In general we should not require Neil to add all these if he does not have the time currently: the basic infrastructure, the concepts, the naming and organization of the library is much more important. Then we can add all these things later.** 1: documentaion =============== The documentation should clearly reflect if an algorithm delegates to a standard algorithm. If the algorithm is new, then it should state complety and exception-safety. More examples would be welcome. Sometimes the rationale and explanations could be improved, e.g for operator|(). 2: return type specification for find() etc =========================================== There where no major objection to the mechanism, but some found the syntax ugly. I believe the suggested syntax (e.g.) boost::find[_f,_e]( range, x ) boost::find[_f+1,_e]( range, x ) was considered good by most. 3: namespace organization ========================= Currently the library uses the namspaces boost boost::adaptors Some raised concern about putting the algorithms straight in the boost namespace before we have a general agreement on where to put algorithms (e.g. in boost::algorithm or boost::ranges or whatever). I think it will make sense to put each algorithm in its own header, since we might have to include additional standard library headers for calling algorithms that are implemented as member functions (but see 7 below). Feedback is most welcome. 4: naming convention for adaptors ================================= The following have been proposed throughout the review (here examplified with "transform"): | transformed( fun ) | transform( fun ) | transform_view( fun ) | view::transform( fun ) There where no consensus during the review. Other libraries seem to use the _view suffix, which is a strong argument for that candidate (in that case, I suggest to drop the adaptors namespace). 5: naming convention for the adaptor generators =============================================== Many people like to be able to say make_transform_range(r,fun) instead of r | transformed( fun ). There was no concensus on how to name these functions. Here are some candidates: make_transform_range( r, fun ) transformed( r, fun ) transform( r, fun ) (*) transform_view( r, fun ) (*) was dislike by some because it has exactly the same spelling as the algorithm transform. Many felt that the confusion is too big if view generators are not named different from the actual algorithms. 6: reintroducing _if variants of algorithms =========================================== An important problem with the suggested approach was the the iterator returned by an algorithm after applying | filtered( pref ) are now filtered iterators and so one needs to manually unwrap the return iterator. This provided enough justification for reintroducing these algorithms. (One could imagine that this unwrapping was done automatically by a conversion operator such that iterator i = boost::find( r | boost::filtered( pred ), x ); "just worked". However, the syntax is still slightly worse than just using the original algorithm). Generic programming is concerned with the use of orthogonal concepts which put together yields all possible combinations of algorithms. If we reintroduce all _if algorithms, we have to aks ourselves "when does it end?". Should all new algorithms then simply add _if variants? This seems very much against the spirit of generic programming. The problem with the iterators being changed (as in the find example) seems to suggest the following guideline: "If the algorithm returns an iterator, it makes sense to provide an _if overload. Otherwise it does not." Under this guideline, find_if() should be there, but count_if() should not be provided. 7: should algorithms call member function when possible? ======================================================== I heard one strong voice against this. The reason was that the algorithm implemented as member function often has quite different guarantees w.r.t. complexity, reference and iterator stabililty. I think this is a very strong argument. Also, we can add this later if good arguments appear, but it is much harder to take away. We also have to remember Scott Meyers item "Beware of container independent code" which also suggest that this is a bad idea. At the very menimum, the original algorithm and the member function should have similar semantics. This seems to suggest that we can call set::lower_bound() from boost::lower_bound(). In that case, the best way would probably be to add these as overloads in the boost namespace: template< class T, class A > typename std::set<T,A>::iterator lower_bound( std::set<T,A>& s ); template< class T, class A > typename std::set<T,A>::const_iterator lower_bound( const std::set<T,A>& s ); 8: making return values of algorithms consistent/intuitive ========================================================== For example, sort(r) returns the sorted range, but sort_heap(r) does not. Similar issues for partial_sort(). Please go through all algorithms to see if this done correctly. 9: output range concept? ========================= It appears that the only use for an output iterator in the library was for boost::copy(rng,iter), and the only use for that function was for "sinks" like std::ostream_iterator<T>(...). This seems to be the only safety hole left in the library. Here's an idea to how we might remove that: create a new "copy sink" concept: struct array_copy_sink { ... template< class Iterator > copy( Iterator begin, Iterator end ) { ... } }; Then we might imagine boost::copy( rng, boost::ostream_sink(std::cout) ); boost::copy( rng, boost::array_sink(an_array) ); boost::copy( rng, boost::ptr_sink(begin,end) ); boost::copy( rng, boost::front_insert_sink(a_deque) ); ... For optimal performance, we also need a "nonoverlapping copy sink" concept, and an algorithm that expects that sink (or that boost::copy() determines the type of the sink automatically). 10: automatic projection ======================= Adope has algorithms overloaded such that projection is very easy: struct my_type { int member; double another_member; }; //... my_type a[] = { { 1, 2.5 }, ... }; // sort the array by the first member: sort(a, less(), &my_type::member); my_type* i = lower_bound(a, 5, less(), &my_type::member); We should be able to express this well, albeit not as concise, with my_type* i = boost::lower_bound( a | project( &my_type::member ), 5, less() ); where project( ... ) could simply return a transform iterator constructed with boost::bind(). There is another problem, however, because now the return value is a tranform_iterator of some form. Appending .base() would solve it, albeit it is somewhat ugly. Again this might raise the question of an implicit conversion. I just want to say this is not a critical issue as we can always add these overloads. --- End of Issues ---- Again, I would like to thank everybody that participated in the review. best regards Thorsten, review manager

2 1

[signals2] documentation on signals vs signals2
by Ross Levine 04 May '09

04 May '09

Is there documentation on when signals2 should be used over signals? If there is any time that signals is a better choice than signals2? I presume either signals2 is incompatible with code written for signals, or signals2 is inferior to signals in some cases, but this is not documented anywhere.

2 1

[move] New version with move-aware containers library
by Ion Gaztañaga 03 May '09

03 May '09

Hi to all, Sorry for the delay, but finally I've found some time to uploaded a new version of Boost.Move: Sandbox: https://svn.boost.org/trac/boost/browser/sandbox/move ZIP file with docs: http://www.drivehq.com/web/igaztanaga/move.zip Online docs: http://www.drivehq.com/web/igaztanaga/libs/move/ Changes: -> Changed folder from boost/move_semantics to boost/move. -> I've extracted all the containers from Boost.Interprocess, put them in boost/container and they only depend on official Boost SVN code (I haven't tested it, but it should be also nice with Boost 1.38). There is no documentation for these containers. -> Fixed a bug with EDG-based compilers. -> Note: I haven't applied yet the patch for non-sfinae compilers. With this changes, I think move emulation is quite portable (at least MSVC, EDG and GCC). Now that containers are independent from Boost.Interprocess, I would like to ask about the next step. If the move library is added, where should we put those containers? I would like to just drop common (vector, list, ...) Boost.Interprocess containers and just maintain these move-aware ones. If move emulation is considered mature enough, we should also plan when could we port all custom move-emulations present in several boost libraries to the "official" move library. Best, Ion

8 20

[ANN] Boost 1.39.0
by Beman Dawes 02 May '09

02 May '09

Boost 1.39.0 is available for download from SourceForge. See http://sourceforge.net/project/showfiles.php?group_id=7586&package_id=8041&… New Libraries: Signals2. Updated Libraries: Asio, Flyweight, Foreach, Hash, Interprocess, Intrusive, Program.Options, Proto, PtrContainer, Range, Unordered, Xpressive. Updated Tools: Boostbook, Quickbook. Plus the usual bug fixes to numerous libraries. Please report any problems to the Boost users or developers mailing list. Thanks, --Beman Dawes, Daniel James, and all the other Boosters who help get releases out

2 1

[gil] Google analytics script tags
by Daniel James 02 May '09

02 May '09

Hi, If you've missed it, there was a recent thread about using google analytics in offline copies of boost and the consensus was firmly against them. The gil documentation includes the google analytics javascript but doesn't seem to use it. So I assumed that their inclusion was a mistake and went ahead and removed them on trunk. I hope that wasn't presumptuous. But I did this on the generated documentation as I couldn't work out how it is generated. It'd useful to have some brief instructions and any necessary files. Ideally we should be able to generate them with boost build but a manual doxygen call is fine. thanks, Daniel

3 4

[chrono] monotonic_clock ofr cygwin
by vicente.botet 02 May '09

02 May '09

Hi, The Boost.Chrono do not compiles on cygwin. The MONOTONIC_CLOCK is not available. I have just defined the monotonic_clock as system_clock and all works right. Attached the patch. Do you agree to commit it? Best, Vicente

2 1

Intentions of Boost.TR1
by David Abrahams 02 May '09

02 May '09

I just saw this post on comp.lang.c++.moderated. I wonder if the Boost.TR1 documentation shouldn't clarify its intended use or degree of conformity. I don't think TR1 conformity is something we have been paying much attention to, is it? -- Dave Abrahams BoostPro Computing http://www.boostpro.com

5 4

German Boost book updated
by Boris Schaeling 02 May '09

02 May '09

For those who know German: I've added five more chapters to my Boost book at http://www.highscore.de/cpp/boost/. There are now altogether 16 chapters covering 29 Boost libraries. The book does not try to replace the documentation but is written in a tutorial style to give developers a kick start. It explains what the numerous libraries are good for and how they are used without going too much into detail. Any feedback is, as always, appreciated! Boris

2 2

Boostcon Boost++0x Session
by Michael Caisse 02 May '09

02 May '09

Dave - I am sorting out which sessions to attend and wish there was more of me. For the Boost++0x sessions reading a tutorial is a prerequisite. Is the tutorial on the boostcon site and I just failed to find it? Thank you- michael -- ---------------------------------- Michael Caisse Object Modeling Designs www.objectmodelingdesigns.com

2 3

how to build boost version 1_34_1 with gcc in non-standard location?
by Oliver Kullmann 01 May '09

01 May '09

Hello, I'm wrestling here for a long time with the following problem, and I would be very glad if somebody could help me here (seems to be straight-forward, but I can't find anything anywhere on the subject): I have to build some C++ code which doesn't compile with the system gcc version 4.3.1. So I have installed gcc version 4.1.2 locally. Now that C++ code uses Boost version 1_34_1, and doesn't compile with higher versions. Alright, so I install 1_34_1; very unfortunately, linking is necessary, and here is the problem: Obviously I have to build Boost 1_34_1 with the locally build gcc 4.1.2, and now how can I tell the Boost-build where to find gcc??? What I found is to use PACKAGEPATH/bjam/bjam --toolset=gcc-4.1.2 --toolset-root=PATH_TO_GCC_DIR --prefix=INSTALLATION_DIR --build-dir=BUILD_DIR "-sGCC_ROOT_DIRECTORY=PATH_TO_GCC_DIR" install --without-python However, as I had to found out after some time, this doesn't have any effect --- Boost just builds with the system compiler, and ignores all these specifications of PATH_TO_GCC_DIR. Now what is the right way to do it?? I would be really glad for help. Oliver

2 2