bjam does not find *.lib file
Dear all,
I have troubles to compile because bjam does not find a *.lib file which
I would expect to be there. I am on Windows 7 with Boost 1.50.0 and
visual studio 10.
It complains:
|LINK : fatal error LNK1181: cannot open input file
'..\boost-build\additional\msvc-10.0\release\address-model-64\threading-multi\pugixml.lib'|
Which is true, the compiler does not build a pugixml.lib. I don't
understand why it is not build, since I am building a *.dll.
I would appriciate any help, because I have no clue where I should look
for the problem.
Thanks a lot,
Ronny
I have the following setup:
|\Jamroot.jam
\*.cpp *.hpp (contains the source of the main program)
\additional\Jamfile.jam
\additional\*.cpp *.hpp (contains a module)|
The Jamfile in \addtional is:
|using msvc ;
# external libs
lib pugixml
: pugixml.cpp
;|
The Jamroot in \ is:
|using msvc ;
use-project boost
: c:/boost_1_50_0 ;
project spectraImport
: requirements
<library>/boost/filesystem//boost_filesystem
<library>/boost/regex//boost_regex
<library>/boost/python//boost_python
# disable autolinking
<define>BOOST_ALL_NO_LIB
<link>shared
: build-dir ../boost-build
;
exe spectraImport
: [ glob *.cpp ] additional//pugixml
;
install ../boost-build : spectraImport ;|
I compile with: bjam address-model=64 variant=release -d2 and get the
following output:
|C:\Users\Duke\my_projects\lipotypexplorer\trunk\c_modules\spectraimport\spectrai
mport>bjam address-model=64 variant=release -d2
Performing configuration checks
- has_icu builds : no
...patience...
...patience...
...found 2471 targets...
...updating 7 targets...
common.mkdir ..\boost-build\additional\msvc-10.0\release\address-model-64
if not exist "..\boost-build\additional\msvc-10.0\release\address-model-
64\\" mkdir "..\boost-build\additional\msvc-10.0\release\address-model-64"
common.mkdir ..\boost-build\additional\msvc-10.0\release\address-model-64\thread
ing-multi
if not exist "..\boost-build\additional\msvc-10.0\release\address-model-
64\threading-multi\\" mkdir "..\boost-build\additional\msvc-10.0\release\address
-model-64\threading-multi"
file ..\boost-build\additional\msvc-10.0\release\address-model-64\threading-mult
i\pugixml.obj.rsp
"additional\pugixml.cpp" -Fo"..\boost-build\additional\msvc-10.0\release\address
-model-64\threading-multi\pugixml.obj" -TP /O2 /Ob2 /W3 /GR /MD /Zc:forScope
/Zc:wchar_t /favor:blend /wd4675 /EHs -c
-DBOOST_ALL_NO_LIB
-DBOOST_FILESYSTEM_DYN_LINK=1
-DBOOST_SYSTEM_DYN_LINK=1
-DNDEBUG
"-IC:\boost_1_50_0"
"-Ic:\Python27\Include"
compile-c-c++ ..\boost-build\additional\msvc-10.0\release\address-model-64\threa
ding-multi\pugixml.obj
call "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat"
x86_amd64 >nul
cl /Zm800 -nologo @"..\boost-build\additional\msvc-10.0\release\address-model-64
\threading-multi\pugixml.obj.rsp"
pugixml.cpp
file ..\boost-build\additional\msvc-10.0\release\address-model-64\threading-mult
i\pugixml.dll.rsp
"..\boost-build\additional\msvc-10.0\release\address-model-64\threading-multi\pu
gixml.obj"
"C:\boost_1_50_0\bin.v2\libs\python\build\msvc-10.0\release\address-model-64\thr
eading-multi\boost_python-vc100-mt-1_50.lib"
"C:\boost_1_50_0\bin.v2\libs\regex\build\msvc-10.0\release\address-model-64\thre
ading-multi\boost_regex-vc100-mt-1_50.lib"
"C:\boost_1_50_0\bin.v2\libs\system\build\msvc-10.0\release\address-model-64\thr
eading-multi\boost_system-vc100-mt-1_50.lib"
"C:\boost_1_50_0\bin.v2\libs\filesystem\build\msvc-10.0\release\address-model-64
\threading-multi\boost_filesystem-vc100-mt-1_50.lib"
"python27.lib"
msvc.link.dll ..\boost-build\additional\msvc-10.0\release\address-model-64\threa
ding-multi\pugixml.dll
call "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.b
at" x86_amd64 >nul
link /NOLOGO /INCREMENTAL:NO /DLL /MACHINE:X64 /subsystem:console /out:"..\boost
-build\additional\msvc-10.0\release\address-model-64\threading-multi\pugixml.dll
" /IMPLIB:"..\boost-build\additional\msvc-10.0\release\address-model-64\threadin
g-multi\pugixml.lib" /LIBPATH:"c:\Python27\libs" @"..\boost-build\additional\m
svc-10.0\release\address-model-64\threading-multi\pugixml.dll.rsp"
if %ERRORLEVEL% NEQ 0 EXIT %ERRORLEVEL%
msvc.manifest.dll ..\boost-build\additional\msvc-10.0\release\address-model-64\t
hreading-multi\pugixml.dll
if exist "..\boost-build\additional\msvc-10.0\release\address-model-64\t
hreading-multi\pugixml.dll.manifest" (
call "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsa
ll.bat" x86_amd64 >nul
mt -nologo -manifest "..\boost-build\additional\msvc-10.0\release\address-model-
64\threading-multi\pugixml.dll.manifest" "-outputresource:..\boost-build\additio
nal\msvc-10.0\release\address-model-64\threading-multi\pugixml.dll;2"
)
file ..\boost-build\msvc-10.0\release\address-model-64\threading-multi\spectraIm
port.exe.rsp
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\Align.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\AlignPrecurso
r.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\AssociateSpec
tra.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\averaging.obj
"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\averagingmsms
.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\Import.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\ImportSpectra
.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\ReadRaw.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\Resolution.ob
j"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\SIException.o
bj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\SpectraCalibr
ate.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\spectraimport
.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\SpectraImport
Tools.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\stdafx.obj"
"..\boost-build\msvc-10.0\release\address-model-64\threading-multi\Tolerance.obj
"
"..\boost-build\additional\msvc-10.0\release\address-model-64\threading-multi\pu
gixml.lib"
"C:\boost_1_50_0\bin.v2\libs\python\build\msvc-10.0\release\address-model-64\thr
eading-multi\boost_python-vc100-mt-1_50.lib"
"C:\boost_1_50_0\bin.v2\libs\regex\build\msvc-10.0\release\address-model-64\thre
ading-multi\boost_regex-vc100-mt-1_50.lib"
"C:\boost_1_50_0\bin.v2\libs\system\build\msvc-10.0\release\address-model-64\thr
eading-multi\boost_system-vc100-mt-1_50.lib"
"C:\boost_1_50_0\bin.v2\libs\filesystem\build\msvc-10.0\release\address-model-64
\threading-multi\boost_filesystem-vc100-mt-1_50.lib"
"python27.lib"
msvc.link ..\boost-build\msvc-10.0\release\address-model-64\threading-multi\spec
traImport.exe
call "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.b
at" x86_amd64 >nul
link /NOLOGO /INCREMENTAL:NO /MACHINE:X64 /subsystem:console /out:"..\boost-buil
d\msvc-10.0\release\address-model-64\threading-multi\spectraImport.exe" /LIBPATH
:"c:\Python27\libs" @"..\boost-build\msvc-10.0\release\address-model-64\threadi
ng-multi\spectraImport.exe.rsp"
if %ERRORLEVEL% NEQ 0 EXIT %ERRORLEVEL%
LINK : fatal error LNK1181: cannot open input file '..\boost-build\additional\ms
vc-10.0\release\address-model-64\threading-multi\pugixml.lib'
...failed msvc.link ..\boost-build\msvc-10.0\release\address-model-64\threading-
multi\spectraImport.exe...
...skipped
Hi Ronny, On Monday, 4. March 2013 14:28:58 Ronny Herzog wrote:
Dear all,
I have troubles to compile because bjam does not find a *.lib file which I would expect to be there. I am on Windows 7 with Boost 1.50.0 and visual studio 10.
It complains:
LINK : fatal error LNK1181: cannot open input file '..\boost-build\additional\msvc-10.0\release\address-model-64\threading-mult i\pugixml.lib' Which is true, the compiler does not build a pugixml.lib. I don't understand why it is not build, since I am building a *.dll. I would appriciate any help, because I have no clue where I should look for the problem.
That is most probably the classical bug that the msvc link.exe does not generate a .lib export library when no visible symbols are available. Do you export your symbols from "pugixml.cpp" via "dllexport/import"? Your Jamfile for "pugixml" seems to contain no controlling define for that. Yours, Jürgen -- * Dipl.-Math. Jürgen Hunold ! * voice: ++49 4257 300 ! Fährstraße 1 * fax : ++49 4257 300 ! 31609 Balge/Sebbenhausen * jhunold@gmx.eu ! Germany
Thank you, Juergen,
there is a switch in the pugixml.hpp for the dll export. When I switch
this on, it does not complain about not-finding the *.lib. I am just
wondering, because the compilation worked some months ago.
Anyway, I get another strange error. It says
|error LNK2019: unresolved external symbol [...]|
The linker cannot resolve a function which is defined in the same file:
pugixml.cpp:
|//[...]
// Writer interface for node printing (see xml_node::print)
class PUGIXML_CLASS xml_writer
{
public:
virtual ~xml_writer() {}
// Write memory chunk into stream/file/whatever
virtual void write(const void* data, size_t size) =0;
};
// xml_writer implementation for FILE*
class PUGIXML_CLASS xml_writer_file:public xml_writer
{
public:
// Construct writer from a FILE* object; void* is used to avoid header dependencies on stdio
xml_writer_file(void* file);
virtual void write(const void* data, size_t size);
private:
void* file;
};
#ifndef PUGIXML_NO_STL
// xml_writer implementation for streams
class PUGIXML_CLASS xml_writer_stream:public xml_writer
{
public:
// Construct writer from an output stream object
xml_writer_stream(std::basic_ostream
Hi Ronny,
On Monday, 4. March 2013 14:28:58 Ronny Herzog wrote:
Dear all,
I have troubles to compile because bjam does not find a *.lib file which I would expect to be there. I am on Windows 7 with Boost 1.50.0 and visual studio 10.
It complains:
LINK : fatal error LNK1181: cannot open input file '..\boost-build\additional\msvc-10.0\release\address-model-64\threading-mult i\pugixml.lib' Which is true, the compiler does not build a pugixml.lib. I don't understand why it is not build, since I am building a *.dll. I would appriciate any help, because I have no clue where I should look for the problem. That is most probably the classical bug that the msvc link.exe does not generate a .lib export library when no visible symbols are available. Do you export your symbols from "pugixml.cpp" via "dllexport/import"? Your Jamfile for "pugixml" seems to contain no controlling define for that.
Yours,
Jürgen
AMDG On 03/04/2013 06:40 AM, Ronny Herzog wrote:
Thank you, Juergen,
there is a switch in the pugixml.hpp for the dll export. When I switch this on, it does not complain about not-finding the *.lib. I am just wondering, because the compilation worked some months ago.
Anyway, I get another strange error. It says
|error LNK2019: unresolved external symbol [...]|
You snipped the most important part of the error message. In Christ, Steven Watanabe
Thank you, Juergen,
there is a switch in the pugixml.hpp for the dll export. When I switch
this on, it does not complain about not-finding the *.lib. I am just
wondering, because the compilation worked some months ago.
Anyway, I get another strange error. It says
error LNK2019: unresolved external symbol [...]
The linker cannot resolve a function which is defined in the same file:
pugixml.cpp:
<code>
//[...]
// Writer interface for node printing (see xml_node::print)
class PUGIXML_CLASS xml_writer
{
public:
virtual ~xml_writer() {}
// Write memory chunk into stream/file/whatever
virtual void write(const void* data, size_t size) = 0;
};
// xml_writer implementation for FILE*
class PUGIXML_CLASS xml_writer_file: public xml_writer
{
public:
// Construct writer from a FILE* object; void* is used to avoid
header dependencies on stdio
xml_writer_file(void* file);
virtual void write(const void* data, size_t size);
private:
void* file;
};
#ifndef PUGIXML_NO_STL
// xml_writer implementation for streams
class PUGIXML_CLASS xml_writer_stream: public xml_writer
{
public:
// Construct writer from an output stream object
xml_writer_stream(std::basic_ostream
Hi Ronny, On Monday, 4. March 2013 14:28:58 Ronny Herzog wrote:
Dear all, I have troubles to compile because bjam does not find a *.lib file which I would expect to be there. I am on Windows 7 with Boost 1.50.0 and visual studio 10. It complains: LINK : fatal error LNK1181: cannot open input file '..\boost-build\additional\msvc-10.0\release\address-model-64\threading-mult i\pugixml.lib' Which is true, the compiler does not build a pugixml.lib. I don't understand why it is not build, since I am building a *.dll. I would appriciate any help, because I have no clue where I should look for the problem.
That is most probably the classical bug that the msvc link.exe does not generate a .lib export library when no visible symbols are available. Do you export your symbols from "pugixml.cpp" via "dllexport/import"? Your Jamfile for "pugixml" seems to contain no controlling define for that. Yours, Jürgen
participants (3)
-
Jürgen Hunold -
Ronny Herzog -
Steven Watanabe