boost and Compact Framework
Hello everybody, I'm developing a wearable gesture recongnition system in which I deal with matrix calculation and signal processing. All software must be developed in C++, so I think that Boost is a good choice for matrix calculation (also for signal processing? for example: FFT, wavelet...). Mainly, I'd like to ask you if Boost libraries are compatible with .NET Compact Framework 3.5. Thanks in advance for your reply. Luigi Seregni
Luigi Seregni wrote:
Hello everybody, I'm developing a wearable gesture recongnition system in which I deal with matrix calculation and signal processing. All software must be developed in C++, so I think that Boost is a good choice for matrix calculation (also for signal processing? for example: FFT, wavelet...).
Mainly, I'd like to ask you if Boost libraries are compatible with .NET Compact Framework 3.5.
Boost does not rely on any version of .NET.
Do you have any suggestion about libraries that I can use for this purpose? 2010/4/14 Mathias Gaunard <mathias.gaunard@ens-lyon.org>
Luigi Seregni wrote:
Hello everybody, I'm developing a wearable gesture recongnition system in which I deal with matrix calculation and signal processing. All software must be developed in C++, so I think that Boost is a good choice for matrix calculation (also for signal processing? for example: FFT, wavelet...).
Mainly, I'd like to ask you if Boost libraries are compatible with .NET Compact Framework 3.5.
Boost does not rely on any version of .NET.
_______________________________________________ Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
-- Seregni Luigi Messenger: gigio.seregni@hotmail.it Skype: seregni.luigi - Desio
On Wednesday 14 April 2010 16:54:58 Luigi Seregni wrote:
Do you have any suggestion about libraries that I can use for this purpose?
Check out the qt libraries wich will allow you to easily port applications to muptiple platforms. It is heavily developed for cell phones these days http://qt.nokia.com/products/platform/qt-for-windows-ce
thanks a lot Marius, I'll look carefully at these libraries... Regards Luigi 2010/4/14 Marius <letto2@gmail.com>
Do you have any suggestion about libraries that I can use for this
On Wednesday 14 April 2010 16:54:58 Luigi Seregni wrote: purpose?
Check out the qt libraries wich will allow you to easily port applications to muptiple platforms. It is heavily developed for cell phones these days
http://qt.nokia.com/products/platform/qt-for-windows-ce _______________________________________________ Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
-- Seregni Luigi Messenger: gigio.seregni@hotmail.it Skype: seregni.luigi - Desio
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! On 14.04.2010, at 10:23, Luigi Seregni wrote:
Hello everybody, I'm developing a wearable gesture recongnition system in which I deal with matrix calculation and signal processing. All software must be developed in C++,
You are forced to use .Net and C++? Why? Unless I midds something, managed C++ is not an more portable than C#, nor any faster. Both compile to CLI bytecode and run on the same virtual machine. Mario Klebsch - -- Mario Klebsch mkl@innodyne.de Innovative Dynamics GmbH http://www.innodyne.de Wiesenweg 9 Tel: +49 5304 91 19 410 38533 Vordorf / Rethen Fax: +49 5304 91 19 412 Geschäftsführer: Dipl. Phys. Gerhard Heidkamp Sitz: 38533 Vordorf - Rethen, Wiesenweg 9 Handelsregister beim Amtsgericht Hildesheim HRB 100553, USt-Id Nr. DE 215 876 442 SICHERHEITSHINWEIS: =================== Diese Email ist elektronisch signiert. InnoDyne versendet grundsätzlich seit dem 11.9.2006 verbindliche Dokumente nur als signierte PDF - Dateien oder elektronisch nachprüfbar signierte Emails. Juristisch und technisch verbindliche Dokumente dürfen das Haus InnoDyne nicht als andere Datei- formate verlassen. Sollten Sie ein signiertes, technisch oder kauf- männisch/juristisch verbindliches Dokument in einem anderen Dateiformat als PDF oder signierte Email von InnoDyne erhalten, so ist dies sehr wahrscheinlich ein Versehen des Versenders, eine Software - Fehlfunktion oder schlimmer noch, eine Fälschung. Wir bitten in einem solchen Fall um sofortige Information und Übermittlung solcher Dokumente an gl@innodyne.de -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (Darwin) iEYEARECAAYFAkvF4csACgkQDwNq2neCwq6XTACgi0nXm4VUOYGEke3ANbFm80xM ueMAn0gTekk5H3KvFytLbKzVi2druzpA =KBnk -----END PGP SIGNATURE-----
Hi Mario, I'm forced to use C++ because I'm developing on the Tegra platform and I've all the solution's files developed for compact framework. So I've to comply these two constraints... However thanks a lot for your reply, if you have any further suggestion I'm appreciating it a lot. 2010/4/14 Mario Klebsch <mkl@innodyne.de>
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi!
On 14.04.2010, at 10:23, Luigi Seregni wrote:
Hello everybody,
I'm developing a wearable gesture recongnition system in which I deal with matrix calculation and signal processing. All software must be developed in C++,
You are forced to use .Net and C++?
Why? Unless I midds something, managed C++ is not an more portable than C#, nor any faster. Both compile to CLI bytecode and run on the same virtual machine.
Mario Klebsch - -- Mario Klebsch mkl@innodyne.de Innovative Dynamics GmbH http://www.innodyne.de Wiesenweg 9 Tel: +49 5304 91 19 410 38533 Vordorf / Rethen Fax: +49 5304 91 19 412
Geschäftsführer: Dipl. Phys. Gerhard Heidkamp Sitz: 38533 Vordorf - Rethen, Wiesenweg 9 Handelsregister beim Amtsgericht Hildesheim HRB 100553, USt-Id Nr. DE 215 876 442
SICHERHEITSHINWEIS: ===================
Diese Email ist elektronisch signiert. InnoDyne versendet grundsätzlich seit dem 11.9.2006 verbindliche Dokumente nur als signierte PDF - Dateien oder elektronisch nachprüfbar signierte Emails. Juristisch und technisch verbindliche Dokumente dürfen das Haus InnoDyne nicht als andere Datei- formate verlassen. Sollten Sie ein signiertes, technisch oder kauf- männisch/juristisch verbindliches Dokument in einem anderen Dateiformat als PDF oder signierte Email von InnoDyne erhalten, so ist dies sehr wahrscheinlich ein Versehen des Versenders, eine Software - Fehlfunktion oder schlimmer noch, eine Fälschung. Wir bitten in einem solchen Fall um sofortige Information und Übermittlung solcher Dokumente an gl@innodyne.de
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (Darwin)
iEYEARECAAYFAkvF4csACgkQDwNq2neCwq6XTACgi0nXm4VUOYGEke3ANbFm80xM ueMAn0gTekk5H3KvFytLbKzVi2druzpA =KBnk -----END PGP SIGNATURE-----
_______________________________________________ Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
-- Seregni Luigi Messenger: gigio.seregni@hotmail.it Skype: seregni.luigi - Desio
From: boost-users-bounces@lists.boost.org [mailto:boost-users-bounces@lists.boost.org] On Behalf Of Luigi Seregni Sent: Wednesday, April 14, 2010 5:44 PM To: boost-users@lists.boost.org Subject: Re: [Boost-users] boost and Compact Framework
I'm forced to use C++ because I'm developing on the Tegra platform and I've all the solution's files developed for compact framework.
So I've to comply these two constraints...
However thanks a lot for your reply, if you have any further suggestion I'm appreciating it a lot.
FWIW, a spin-off from the Boost.Math project was a "distribution explorer" http://sourceforge.net/projects/distexplorer/ allows you to download an installable .msi that uses .Net framework. This uses the Boost.Math library to create a .dll from C++ mathy code compiled in CLI mode. It links with a C# windowy thing to allow the parameters to be set and values displayed. Of course this little utility isn't of any use to you, but it may help you in seeing how to combine C++ with C#. All the files are in the sandbox. https://svn.boost.org/svn/boost/sandbox/math_toolkit with details at https://svn.boost.org/svn/boost/sandbox/math_toolkit/libs/math/dot_net_examp... Tell me if you have any questions about how this works. Paul --- Paul A. Bristow Prizet Farmhouse Kendal, UK LA8 8AB +44 1539 561830, mobile +44 7714330204 pbristow@hetp.u-net.com
Thanks a lot for your suggestions! I think that these links will be hepful. Regards Luigi Seregni 2010/4/14 Paul A. Bristow <pbristow@hetp.u-net.com>
From: boost-users-bounces@lists.boost.org [mailto: boost-users-bounces@lists.boost.org] On Behalf Of Luigi Seregni Sent: Wednesday, April 14, 2010 5:44 PM To: boost-users@lists.boost.org Subject: Re: [Boost-users] boost and Compact Framework
I'm forced to use C++ because I'm developing on the Tegra platform and I've all the solution's files developed for compact framework.
So I've to comply these two constraints...
However thanks a lot for your reply, if you have any further suggestion I'm appreciating it a lot.
FWIW, a spin-off from the Boost.Math project was a "distribution explorer"
http://sourceforge.net/projects/distexplorer/
allows you to download an installable .msi that uses .Net framework.
This uses the Boost.Math library to create a .dll from C++ mathy code compiled in CLI mode.
It links with a C# windowy thing to allow the parameters to be set and values displayed.
Of course this little utility isn't of any use to you, but it may help you in seeing how to combine C++ with C#.
All the files are in the sandbox.
https://svn.boost.org/svn/boost/sandbox/math_toolkit
with details at
https://svn.boost.org/svn/boost/sandbox/math_toolkit/libs/math/dot_net_examp...
Tell me if you have any questions about how this works.
Paul
--- Paul A. Bristow Prizet Farmhouse Kendal, UK LA8 8AB +44 1539 561830, mobile +44 7714330204 pbristow@hetp.u-net.com
_______________________________________________ Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
-- Seregni Luigi Messenger: gigio.seregni@hotmail.it Skype: seregni.luigi - Desio
participants (5)
-
Luigi Seregni -
Mario Klebsch -
Marius -
Mathias Gaunard -
Paul A. Bristow