- Boost-users - lists.preview.boost.org

Installation of boost-sandbox
by Franz Mueller 18 Jul '04

18 Jul '04

Hi, I've heared of the ublas-binding to lapack, which sounds very good. Thus I tried to install it, but I didn't succeed. I got boost-sandbox using cvs. Then I went to the boost-sandbox directory and did a bjam. But I got this: libs\numeric\blasbindings\tst\Jamfile: No such file or directory libs\numeric\blasbindings\tst\Jamfile: No such file or directory don't know how to make <@boost-sandbox!libs!numeric!bindings!amos>amos.cpp ...found 227 targets... ...updating 34 targets... ...can't find 1 target... ...can't make 5 targets... MkDir1 bin I am using Visual Studio.NET Prof. 2003. I'd love to try the ublas-bindings, so can anybody help me installing it? Anything else I have to take care of once the bindings work (e.g. link to clapack or so)? -- Franz

1 0

Re: [Boost-users] cvs access problems SOLVED --website update
by Ross Boylan 17 Jul '04

17 Jul '04

On Fri, Jul 16, 2004 at 06:44:28PM -0700, Jeff Garland wrote: > On Fri, 16 Jul 2004 18:24:18 -0700, Ross Boylan wrote > > This happened to me twice: > > $ cvs -d :pserver:anonymous@cvs.boost- > > sandbox.sourceforge.net:/cvsroot/boost-sandbox login Logging in to > > :pserver:anonymous@cvs.boost- > > sandbox.sourceforge.net:2401/cvsroot/boost-sandbox CVS password: # > > I hit enter cvs [login aborted]: connect to cvs.boost- > > sandbox.sourceforge.net(66.35.250.209):2401 failed: Connection timed > > out > > > > Am I doing something wrong (like needing to open up a port in my > > firewall), or is this just a momentary sourceforge lapse? > > > > I've gotten cvs stuff from elsewhere (including other sf projects, I > > think), so I doubt it's my setup. > > Soureforge has removed the project specifc path from url. Note the > cvs.sourceforge.net instead of cvs.boost-sandbox.sourceforge.net : > > $ cvs -d :pserver:anonymous@cvs.sourceforge.net:/cvsroot/boost-sandbox login > > Jeff Thanks, that did it. It might be good to update http://www.boost.org/more/mailing_lists.htm on the bottom, which gives the old location.

3 2

cvs access problems
by Ross Boylan 17 Jul '04

17 Jul '04

This happened to me twice: $ cvs -d :pserver:anonymous@cvs.boost-sandbox.sourceforge.net:/cvsroot/boost-sandbox login Logging in to :pserver:anonymous@cvs.boost-sandbox.sourceforge.net:2401/cvsroot/boost-sandbox CVS password: # I hit enter cvs [login aborted]: connect to cvs.boost-sandbox.sourceforge.net(66.35.250.209):2401 failed: Connection timed out Am I doing something wrong (like needing to open up a port in my firewall), or is this just a momentary sourceforge lapse? I've gotten cvs stuff from elsewhere (including other sf projects, I think), so I doubt it's my setup.

3 2

dated link on http://www.boost.org/
by Ross Boylan 17 Jul '04

17 Jul '04

The second paragraph reads "A further goal is to establish "existing practice" and provide reference implementations so that Boost libraries are suitable for eventual standardization. Ten Boost libraries will be included in the C++ Standards Committee's upcoming C++ Standard Library Technical Report as a step toward becoming part of a future C++ Standard." The hypertext link for C++ Standards Committee' is http://anubis.dkuug.dk/jtc1/sc22/wg21/. That page still exists, but redirects you to http://www.open-std.org/jtc1/sc22/wg21/. It would probably be good to change the link. Is there a better place to report this? I don't see any web site contact on the page.

2 3

BGL transitive reduction algorithm?
by Thomas Costa 16 Jul '04

16 Jul '04

I've been looking at the BGL headers and documentation looking for a templated algorithm to compute the transitive reduction of a directed graph and I don't see anything. Am I missing something obvious, showing my total lack of experience in graph theory, or is this algorithm not in BGL yet?

3 4

RE: [Boost-users] Re: shared_ptr: LWM versus atomic_count?
by Ben Hutchings 16 Jul '04

16 Jul '04

Russell Hind <rhind(a)mac.com> wrote: > Caleb Epstein wrote: > > > I've been perusing the source code of <boost/shared_ptr.hpp> and > > noticed that it uses the <boost/detail/shared_count.hpp> class to do > > reference counting and not <boost/detail/atomic_count.hpp> (unless > > BOOST_NO_MEMBER_TEMPLATES or BOOST_MSVC6_MEMBER_TEMPLATES are > > defined). > > > > Can anyone comment on the reasoning behind using a lightweight > > mutex-protected counter instead of an atomic counter? I'd > > think that an atomic counter would be faster, but I suspect that > > there is a good reason for protecting the count with a mutex. This > > then begs the question of why use the atomic counter in the > > situations mentioned above? > > If you look at shared_count, you'll see it has to keep track of 2 > values, strong_count and weak_count, you can't do this with 'atomic > count' so therefore it uses lwm. It isn't fundamentally necessary to have two counters, though; see <http://groups.google.com/groups?threadm=slrnbhbnpc.154.do-not-spam -benh%40tin.bwsint.com>.

2 1

dupe symbols linker error with indexed_set
by Jedediah Smith 16 Jul '04

16 Jul '04

scbarg.obj : error LNK2005: "struct unbounded_type::boost::detail::unbounded_type & boost::indexed_sets::`anonymous namespace'::unbounded" (?unbounded@?A0x65131fae@indexed_sets@boost@@3AAUunbounded_type@detail@23@A) already defined in scbarcf.obj scbarg.obj : error LNK2005: "struct unbounded_type::boost::detail::unbounded_type boost::indexed_sets::`anonymous namespace'::unbounded_obj" (?unbounded_obj@?A0x65131fae@indexed_sets@boost@@3Uunbounded_type@detail@23@A) already defined in scbarcf.obj Compiler is VC7.1 The two modules in the error messages don't use indexed_set at all but indexed_set.hpp is included globally. It seems as if indexed_set.hpp has a definition hiding in it somewhere. Here are the two declarations that appear in my project (they are in different namespaces so m_events_t does not collide): typedef is::indexed_set< event_t, is::index_list< is::unique <is::member<event_t,eventid_t,&event_t::id> >, is::non_unique <is::member<event_t,double, &event_t::time> >, is::non_unique <is::member<event_t,hoption<notepos_t>,&event_t::notepos>, notepos_compare> > > m_events_t; typedef is::indexed_set< event_t, is::index_list< is::unique<is::member<event_t,eventid_t,&event_t::id> >, is::non_unique<is::member<event_t,double,&event_t::time> >, is::non_unique<is::member<event_t,Score::beatref_t,&event_t::beat> > > > m_events_t; -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/

1 0

Heterogeneous binary buffers.
by Hagen Möbius 16 Jul '04

16 Jul '04

Hi Boosters. I recently started working on a class which provides the functionality of any other binary buffer and a bit more (which is why I do it ;)). Because the content of this buffer is not homogeneous regarding the type of the elements stored in it I have this more general question: Which type should I choose to be the basis for those buffers? Can anybody advise me, pls? Regards, Hagen.

1 0

Building boost under mingw: bjam invokes VC7?? (part II: typo cor rected)
by Brewer, Christopher 15 Jul '04

15 Jul '04

Oops, sorry, Ben and Heinquoi- that was a typo :P What I *meant* to say was: Starting bjam with: bjam -sTOOLS=mingw install causes bjam to invoke VC7 instead of gcc. Same thing if quotes are used (as described in the documentation: bjam "-sTOOLS=mingw" install I ran it again, making sure that I actually used -sTOOLS and not -sTOOL, and I still see the described behavior. Again, this is using boost 1.31.0, msys and mingw on Windows 2000, and a prebuilt version of bjam recently downloaded from sourceforge. Anyone have any ideas how to make bjam (properly) invoke gcc? -Chris Brewer -----Original Message----- From: Ben Hutchings [mailto:ben.hutchings@businesswebsoftware.com] Sent: Tuesday, July 13, 2004 8:03 AM To: boost-users(a)lists.boost.org Subject: RE: [Boost-users] building boost under mingw: bjam invokes VC7?? Christopher Brewer <cbrewer(a)wmsgaming.com> wrote: > I recently attempted to build and install boost 1.31.0 using > msys (i.e., mingw). > I enter the boost directory and start bjam with: > > bjam -sTOOL=mingw install > > ...and then I see bjam invoking vc7 instead of gcc. <snip> The variable is called TOOLS, not TOOL.

3 3

RE: [Boost-users] Re: Building boost under mingw: bjam invokes VC7??
by Schalk_Cronje＠NAI.com 15 Jul '04

15 Jul '04

I might be missing the point here, but I have built Boost under mingw using TOOLS=gcc and I seem to get satisfactory results. I have not actually built the regression tests, so there might be some lurking issues that I am not aware of.

2 1

TR: pb with use Random on VC++6 and Intel C++ 8
by Heinquoi 15 Jul '04

15 Jul '04

Hello, I install and test boost on my computer since two weeks. And I have much problems. Actually I test random with the code indicated on http://www.boost.org/libs/random/index.html The code is #include <iostream> #include <boost/random.hpp> int main () { boost::mt19937 rng; // produces randomness out of thin air // see pseudo-random number generators boost::uniform_int<> six(1,6); // distribution that maps to 1..6 // see random number distributions boost::variate_generator<boost::mt19937, boost::uniform_int<> > die(rng, six); // glues randomness with mapping int x = die(); // simulate rolling a die } More simple, there is not. And, the error messages on intel c++ 8 are : Compiling... C:\BOOST_1_31_0\boost/integer_traits.hpp(129): error: class "boost::integer_traits<wchar_t={unsigned short}>" has already been defined class integer_traits<unsigned short> ^ compilation aborted for D:\X Mes Documents X\Mes Programmes\VisualC++ 6\random boost 1\random-1.cpp (code 2) Error executing cl.exe. random boost 1.exe - 1 error(s), 0 warning(s) Would anybody have already seen it? errors on template class who have multiples definitions on the header "integer_traits.hpp". The compiler don't accept surcharge of template class. Perhaps there is an option for the compiler. What do you think about this ? After this problem, I test with msvc++6 sp5 + service pack processor 5 and... Compiling... random-1.cpp C:\BOOST_1_31_0\boost/random/uniform_01.hpp(34) : fatal error C1001: INTERNAL COMPILER ERROR (compiler file 'msc1.cpp', line 1794) Please choose the Technical Support command on the Visual C++ Help menu, or open the Technical Support help file for more information Error executing cl.exe. random boost 1.exe - 1 error(s), 1 warning(s) it gives me an error fatal with no information on Technical Support of VC6. I ask me if the problem is linked at the service pack 5 for msvc and service pack 5 for processor ( http://msdn.microsoft.com/vstudio/downloads/tools/ppack/download.aspx ),I have install. Someone have installed this pack ? Thanks for your responses. heinquoi

1 1

Re: Building boost under mingw: bjam invokes VC7?? (part III: dat a)
by Brewer, Christopher 14 Jul '04

14 Jul '04

David- When you asked me to run the following lines: bjam -f- "-sTOOLS=mingw" install ECHO $(TOOLS) ; ^Z I see the following: bjam -f- "-sTOOLS=mingw" install (hundreds of lines of error text go by here) ECHO $(TOOLS) ; reply is: sh: ./TOOLS: is a directory ...and nothing is displayed after entering ctrl-Z :) The reply to ECHO $(TOOLS) ; seems odd. I doubt that this is what you were expecting. There *is* a 'tools' directory under boost_1_31_0, but not a 'TOOLS' directory. Case-sensitivity issues? I have also run the following: bjam -d+5 "-sTOOLS=mingw" install > bug.out Note that not everything is captured in 'bug.out'. I see hundreds of lines of the following on the console: The system cannot find the path specified. This is not surprising as I don't have VC7 installed. Unfortunately I don't have a place to publicly park the compressed 'bug.out' file so I will email it directly to you. However, here's the first few lines if that's of any help. (BEGIN LISTING===============) --------------------------------------------------------------------- skipping Boost.Python library build due to missing or incorrect configuration couldn't find Python.h in "c:/tools/python/include" You can configure the location of your python installation by setting: PYTHON_ROOT - currently "c:/tools/python" PYTHON_VERSION - The 2-part python Major.Minor version number (e.g. "2.2", NOT "2.2.1") - currently "2.2" The following are automatically configured from PYTHON_ROOT if not otherwise set: PYTHON_LIB_PATH - path to Python library object; currently "c:/tools/python/libs" --------------------------------------------------------------------- ...found 5266 targets... ...updating 632 targets... vc-C++ bin\boost\libs\date_time\build\boost_date_time.dll\vc7.1\debug\greg_month.ob j CALL "C:\Program Files\Microsoft Visual Studio .NET 2003\VC7\bin\VCVARS32.BAT" >nul "C:\Program Files\Microsoft Visual Studio .NET 2003\VC7\bin\cl" /Zm800 -nologo -GX -c -DBOOST_DATE_TIME_POSIX_TIME_STD_CONFIG -DBOOST_ALL_DYN_LINK=1 /Z7 /Od /Ob0 /GX /GR /MDd /Op /Zc:forScope /Zc:wchar_t -I"bin\boost\libs\date_time\build" -I"C:\msys\1.0\share\boost_1_31_0" -Fo"bin\boost\libs\date_time\build\boost_date_time.dll\vc7.1\debug\greg_mont h.obj" -Tp"C:\msys\1.0\share\boost_1_31_0\libs\date_time\build\../src/gregorian/gre g_month.cpp" ...failed vc-C++ bin\boost\libs\date_time\build\boost_date_time.dll\vc7.1\debug\greg_month.ob j... (SNIP============== as this error apparently occurs for every single file) Best regards, Chris Brewer (Company-mandated disclaimer) This message originates from WMS Gaming Inc. It contains information which may be confidential or privileged and is intended only for the individual or entity named above. It is prohibited for anyone else to disclose, copy, distribute or use the contents of this message. All personal messages express views solely of the sender, which are not to be attributed to WMS Gaming Inc., and may not be copied or distributed without this disclaimer. If you received this message in error, please notify us immediately at (847) 785-3000.

2 1

Source of Boost Graph Library
by JONATHAN JAMES HITCHCOCK 14 Jul '04

14 Jul '04

Please can anyone tell me where to find the source files for the Boost Graph Library? I downloaded boost_1_31_0.tar.gz and expected to find the source files in boost-1.31.0/libs/graph/src, but the only files there are for something called graphviz.

4 3

shared_ptr: LWM versus atomic_count?
by Caleb Epstein 14 Jul '04

14 Jul '04

I've been perusing the source code of <boost/shared_ptr.hpp> and noticed that it uses the <boost/detail/shared_count.hpp> class to do reference counting and not <boost/detail/atomic_count.hpp> (unless BOOST_NO_MEMBER_TEMPLATES or BOOST_MSVC6_MEMBER_TEMPLATES are defined). Can anyone comment on the reasoning behind using a lightweight mutex-protected counter instead of an atomic counter? I'd think that an atomic counter would be faster, but I suspect that there is a good reason for protecting the count with a mutex. This then begs the question of why use the atomic counter in the situations mentioned above? Thanks. -- Caleb Epstein caleb.epstein(a)gmail.com

2 2

need help building on AIX 5.1
by Jim Edwards 13 Jul '04

13 Jul '04

Hi, Beginning at the top, apparently my cpp doesn't like the syntax of BOOST_TESTED_AT(0x531) : xlc-C++-action bin/boost/libs/python/build/libboost_python.so/vacpp/debug/numeric.o "/home/jedwards/cvs_src/boost/boost/iterator/detail/config_def.hpp", line 28.39: 1540-0827 (S) The constant expression on the #if directive contains a syntax error at "BOOST_TESTED_AT". -- Jim Edwards jedwards(a)ucar.edu IBM Applications Analyst NCAR SCD BOULDER CO 303-497-1842

1 0

building boost under mingw: bjam invokes VC7??
by Brewer, Christopher 13 Jul '04

13 Jul '04

Hello, all- I recently attempted to build and install boost 1.31.0 using msys (i.e., mingw). I enter the boost directory and start bjam with: bjam -sTOOL=mingw install ...and then I see bjam invoking vc7 instead of gcc. For example: "C:\Program Files\Microsoft Visual Studio .NET 2003\VC7\bin\cl" ... followed by many, many errors, as VC7 is not installed on my system. I don't understand why bjam thinks it should be using VC7. Can anyone offer any advice or a workaround? I'm using the latest version of both msys and mingw under Windows 2000, and mingw is installed *under* msys, if that makes a difference. Regards, Chris Brewer (Company-mandated disclaimer) This message originates from WMS Gaming Inc. It contains information which may be confidential or privileged and is intended only for the individual or entity named above. It is prohibited for anyone else to disclose, copy, distribute or use the contents of this message. All personal messages express views solely of the sender, which are not to be attributed to WMS Gaming Inc., and may not be copied or distributed without this disclaimer. If you received this message in error, please notify us immediately at (847) 785-3000.

2 1

Limitation of boost::protect of Boost.Bind
by Sigg＠inf.ethz.ch 13 Jul '04

13 Jul '04

Hi, I would like to bind a function which takes a boost::function<void> as parameter, let's say void caller(boost::function<void (void)>& f) { f(); } void foo() {} boost::function<void (void)> foo_fun = &foo; boost::bind(caller, foo_fun)(); But what if the function has a parameter, for example void bar(int i) {} How can I create the folling a function object? boost::function<void (int)> The function object should take an int, bind it to bar and then call caller with the resulting nullary function. boost::function<void (int)> bar_fun = &bar; // doesn't work because caller and bar are being composed. boost:bind(caller, boost::bind(bar_fun, _1)) // doesn't work because caller doesn't accept a unary function. boost:bind(caller, boost::protect(boost::bind(bar_fun, _1))) Does anyone have a clean solution for that? boost::protect doesn't provide the option to evaluate the arguments (_1) but _not_ perform a composition. Regards, Christian

1 0

RE: [Boost-users] building boost under mingw: bjam invokes VC7??
by Ben Hutchings 13 Jul '04

13 Jul '04

Christopher Brewer <cbrewer(a)wmsgaming.com> wrote: > I recently attempted to build and install boost 1.31.0 using > msys (i.e., mingw). > I enter the boost directory and start bjam with: > > bjam -sTOOL=mingw install > > ...and then I see bjam invoking vc7 instead of gcc. <snip> The variable is called TOOLS, not TOOL.

1 0

Fw: Parser error from semantic actions
by Hermann Oliveira Rodrigues 12 Jul '04

12 Jul '04

Hi, How can I inform an error from a semantic action? Consider the following code: rule = IDENTIFIER[ callback_a( m_varBinder, &VarBinder::bind ) ]; callback_a is an actor allowing member calls in semantic actions. VarBinder::bind receives an identifier and try to locate it in an external symbol table. If bind fails, I like to inform a parser error back to Spirit. How can I do that? Pointers to the relevant parts in the documentation are welcome. Hermann [My apologies for sending a Spirit specific question to boost-users lists. However, I getting an administrative error from the sourceforge mail server]

3 2

Help with tuples - repeated members
by John.Wismar＠autozone.com 12 Jul '04

12 Jul '04

I've been playing with Boost's tuples library, but I'm having some trouble working through a wrinkle: I have some routines that use tuple<int>, tuple<int, int>, etc., up to tuple<int, int, int, int, int>. I'd like to be able to declare these objects using an alternative notation, along the lines of: tuple_clone<int, 1>, tuple_clone<int, 2>, tuple_clone<int, 3>, etc. The objective would be to allow me to write a function template that looked something like this: template <int N> tuple_clone<int, N> fn(tuple_clone<int, N-1> t) { tuple_clone<int, N> ret; ret.get_head() = getValue(); ret.get_tail() = t; return ret; } Each time I try to write tuple_clone, though, I end up stumped. Is it possible to write something like this, while leveraging the tuples library? Or is there a different approach I ought to look into? Thanks! -------------------------------- John Wismar john.wismar(a)autozone.com ------------------------------------------------------------------------ The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

2 1

FW: "memory access violation" in boost::serialization
by Dirk Griffioen 12 Jul '04

12 Jul '04

Hi, I encountered the following little problem: I would like to use the following datastructures with boost::serialize: struct Match {}; typedef std::string Key; typedef tst< Match, Key > TernarySearchTree; //this one has a shared_ptr typedef std::vector< TernarySearchTree > Trees; typedef std::map< std::string, Trees > Symbols; I have defined some serialize overloads so saving goes fine, but when loading I get a "memory acces violation" inside the following code: { boost::archive::text_iarchive ia(ifs); ia >> symbols_; } More specific, inside <boost/serializiton/shared_count.hpp> void add_ref_copy() { #if defined(BOOST_HAS_THREADS) mutex_type::scoped_lock lock(mtx_); #endif ++use_count_; } Which constructs a scoped_lock, and there, the "explicit scoped_lock(lightweight_mutex & m): m_(m)" seems to go wrong. What could be the reason? The more since all worked fine (saving and loading) when I used a simple vector of tst's. Is it not possible to use a map of string/vector (the error seems to suggest the library failing when copying vector to map - eg ++use_count of the shared_ptr inside the TST). Thanks in advance, Dirk

1 0

Re: Sun Solaris Forte 8 and boost_1_31_0
by Yaron Hirsch 12 Jul '04

12 Jul '04

Hi, I've also tried to compile RegEx with Forte 8. Did you try that? I think I managed to get things to compile, but unfortunately, when I try to compile it in 64-bit mode, we still get problems. Is there any chance you've tried compiling it in 64-bits? Thanks. "Christopher Currie" <codemonkey(a)gmail.com> wrote in message news:<cc43hj$8kl$1(a)sea.gmane.org>... > Tom Aratari wrote: > > > Tell me about it! I have to cross platform compile many things, and > > templating on Forte is not fun. But the template support > > in Forte 8 is MUCH improved over 7.2 .. The syntax is weird but I have > > gotten things to compile. > > Patches are always welcome ... :-) > > -- > Christopher Currie <codemonkey(a)gmail.com>

2 1

Problem about build regex under win32 using stlpot5.0
by huangliang 12 Jul '04

12 Jul '04

Recently I begin to use stlport in my programs, and I want to build boost regex under win32 using vc6 and stlport 5.0. But when I build them,the following errors occurs: C:\lib\boost-1.30.2\libs\regex\build>set MSVCDIR= D:\Program Files\Microsoft Visual Studio\VC98\Bin C:\lib\boost-1.30.2\libs\regex\build>set STLPORT_PATH=E:/HuangLiang/c++stl/STLport-5.0-1031 C:\lib\boost-1.30.2\libs\regex\build>nmake -fvc6-stlport.mak cl /nologo /MT /W3 /GX /O2 /GB /GF /Gy /IE:/HuangLiang/c++stl/STLport-5.0-1031\stlport /I..\..\..\ /D_MT /DWIN32 /DNDEBUG /D_MBCS /D_LIB /YX /FD /c -Fpvc6-stlport/boost_regex_vc6-stlport_mss/boost_regex_vc6-stlport_mss.pch -Fo./vc6-stlport/boost_regex_vc6-stlport_mss/ -Fdvc6-stlport/boost_regex_vc6-stlport_mss.pdb ../src/cpp_regex_traits.cpp cpp_regex_traits.cpp ../src/cpp_regex_traits.cpp(662) : error C2660: 'isspace' : function does not take 2 parameters ../src/cpp_regex_traits.cpp(662) : fatal error C1903: unable to recover from previous error(s); stopping compilation After I searched msdn, I found that isspace have been defined at 2 places: isspace template<class E> bool isspace(E c, const locale& loc) const; The template function returns use_facet< ctype<E> >(loc). is(ctype<E>:: space, c). and in ctype.h. I remember when I compile regex using vc6 without stlport, no same errors occured. I need some help about what has happened with me. Thank you !

1 0

RE: [Boost-users] Generic Class Factory
by Mark Loew 09 Jul '04

09 Jul '04

I have been looking at Andre Alexandrescu's book Modern C++ Design. He has the Loki library in there. That has all of the pieces that are needed. Does anyone know of any issue with mixing Boost, ATL and Loki? A side question is has anyone looked at merging the Loki library into the Boost library. It seems like a really great fit as the Loki library deals with a different set of problems. Mark Loew, MCSD, MCSE Application Development Consultant Sagestone Consulting www.sagestone.com Grand Rapids, MI 616-954-9556 x149 Microsoft Gold Certified Partner mloew(a)sagestone.com -----Original Message----- From: boost-users-bounces(a)lists.boost.org [mailto:boost-users-bounces@lists.boost.org] On Behalf Of Peter Dimov Sent: Thursday, July 08, 2004 7:41 AM To: boost-users(a)lists.boost.org Subject: Re: [Boost-users] Generic Class Factory Mark Loew wrote: > I have to create a class factory and was looking for a generic class > factory that I could work with. I looked in the boost documentation > but didn't find anything. Is there something there that I am missing > or do I need to roll my own? Depending on your needs, map< string, function< shared_ptr<Base>() > > may suffice. _______________________________________________ Boost-users mailing list Boost-users(a)lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users

1 0

Failed build using vc7.1
by Owen Jacobson 09 Jul '04

09 Jul '04

Salve. I'm trying to use boost.threads in my project, as they look like the cleanest cross-platform threading interface I've seen in a while, and I'm running into a wee problem convincing the libraries to build. My setup: Windows 2000 SP 4 Microsoft Visual C++ 7.1 (C:\Program Files\Microsoft Visual Studio .NET 2003\VC7\) MS SDK (U:\Program Files\Microsoft SDK) Boost 1.31.0 (C:\boost_1_31_0, installing to C:\boost) Cygwin is installed, but not present in PATH; I am not using cygwin to build this project, only to run PostgreSQL. Python is not installed, as I have no need for it. Visual C++ 6.0 is also installed (for legacy projects), but not present in PATH. bjam is present in PATH, as downloaded from Sourceforge. C:\boost_1_31_0> bjam -v Boost.Jam Version 3.1.9. OS=NT. Attempting to run bjam results in a lengthy list of errors: -- long paste -- C:\boost_1_31_0> bjam -sTOOLS=vc7.1 --------------------------------------------------------------------- skipping Boost.Python library build due to missing or incorrect configuration (...) --------------------------------------------------------------------- ...patience... ...found 5266 targets... ...updating 747 targets... MkDir1 bin MkDir1 bin\boost MkDir1 bin\boost\libs MkDir1 bin\boost\libs\date_time MkDir1 bin\boost\libs\date_time\build MkDir1 bin\boost\libs\date_time\build\boost_date_time.dll MkDir1 bin\boost\libs\date_time\build\boost_date_time.dll\vc7.1 MkDir1 bin\boost\libs\date_time\build\boost_date_time.dll\vc7.1\debug vc-C++ bin\boost\libs\date_time\build\boost_date_time.dll\vc7.1\debug\greg_month.ob j The system cannot find the path specified. The system cannot find the path specified. CALL "C:\Program Files\Microsoft Visual Studio .NET 2003\VC7\bin\VCVARS32.BAT" >nul "C:\Program Files\Microsoft Visual Studio .NET 2003\VC7\bin\cl" /Zm800 -nologo -GX -c -DBOOST_DATE_TIME_POSIX_TIME_STD_CONFIG -DBOOST_ALL_D YN_LINK=1 /Z7 /Od /Ob0 /GX /GR /MDd /Op /Zc:forScope Zc:wchar_t -I"bin\boost\libs\date_time\build" -I"C:\boost_1_31_0" -Fo"bi n\boost\libs\date_time\build\boost_date_time.dll\vc7.1\debug\greg_month.obj" -Tp"C:\boost_1_31_0\libs\date_time\build\../src/gregorian/greg_month.cpp" ...failed vc-C++ bin\boost\libs\date_time\build\boost_date_time.dll\vc7.1\debug\greg_month.ob j... -- end paste -- (There is a complete build log at <http://machinae.lionsanctuary.net/2004/07/boost-log> (424KB).) What is vc-C++ doing and where can I find it? There is no file with that string in the name anywhere in the boost tree. As far as I can tell, it fails to build any object files at all. Any suggestions? Owen

3 2