- Boost-users - lists.preview.boost.org

[thread] how to use thread::timed_join
by Johan Råde 22 Apr '08

22 Apr '08

I want to do a timed join, with a relative time of 0.1s. I can not figure out from the docs how to do this. I find the prototypes somewhat mystifying: bool timed_join(const system_time& wait_until); template<typename TimeDuration> bool timed_join(TimeDuration const& rel_time); What is system_time? What should TimeDuration be? I'm using Windows. Thank you, Johan Råde

5 7

Edges list
by Chartier Nicolas 22 Apr '08

22 Apr '08

I'd like to know how I could retrieve a weighted edges list from a graph, without forgetting vertices and weight, in a list for example. Any suggestion welcome ;) NC ------- Chartier Nicolas +33 (0)6 78 32 94 33

1 0

Re: [Boost-users] Mingw cross compilation
by James Choa 22 Apr '08

22 Apr '08

> Hi James, > > I managed to cross-compile static release builds of serialization, > filesystem, system, date_time, and program_options from boost 1.35.0 > with i386-mingw32 gcc 4.3.0 (http://mingw-cross.sourceforge.net/) under > Fedora 8 using a three-step procedure: > - create a user-config.jam file with content: > using gcc : : i386-mingw32-gcc : ; > - run bjam (assuming you have compiled it already): > bjam --user-config=user-config.jam --toolset=gcc link=static release ... > - manually run i386-mingw32-ranlib on the generated libraries > > There might be a better way to do this, but at least the above worked > for me. > /Mikko Thanks! I'll give it a try

1 1

[iostreams] Obfuscator
by Robert Bielik 22 Apr '08

22 Apr '08

Hi all, I'm trying to make filter to obfuscate some data so its not that obvious what it is. Problem is (I think) that in some cases, the obfuscator produces a null character as its output, and I'm not sure, but it seems that upon reading back the data, the null character is interpreted as EOF. At least, that is what I get from boost::iostreams::get(src) at the position where the null character was in the output. Can I somehow tell the stream that it is binary and not care about null characters? TIA /Rob

2 2

Re: [Boost-users] Applying Boost license to non boost projects
by Robert Marion 22 Apr '08

22 Apr '08

You may wish to consider applying the liberal BSD (http://www.opensource.org/licenses/bsd-license.php) or MIT (http://www.opensource.org/licenses/mit-license.php) licenses. These are both in widespread use for open source, and impose no restrictions, aside from attribution, on the user. Putting the license text at the top of all headers is not strictly necessary, but not a bad idea. Robert Marion http://www.palamida.com > I am interested in adopting the Boost Software license for an open source C++ > library (Castor: http://www.mpprogramming.com/2.html) > > [ snip ] > - Does this same guideline apply to non boost projects ? The need for stating > Boost.org there might confuse some users of non boost prj to think that the > library is supplied by Boost. > - Do all header files in my prj (which is a pure header library) need to > include this text at the top/somewhere in order to adopt the license. > > -Roshan

2 1

[BGL] implicit astar_search weirdness, bug in mutable_queue?
by Oliver Seiler 21 Apr '08

21 Apr '08

Hi there -- long-time reader, first-time poster! I've been trying to use astar_search from the graph library for a little problem I'm working on. Specifically, I wanted to use it to perform a search on an implicit graph (more specifically, an implicit tree), as touched on briefly in the docs for astar_search. In this case, I'm using boost 1.33.1 Unfortunately, this doesn't appear to be well supported "out of the box". Google didn't turn up much on the subject, except for a paper done by Kris Beevers and Jufeng Peng (www.cs.rpi.edu/~beevek/research/astar_bgl04.pdf) which mentions the need for a non-const version of the breadth-first search code in BGL, and a message to the list from Ian Downes, Feb 28th, asking about doing an implicit search as well (couldn't find any followups). Using Beevers paper as a template, I started bumping into some serious memory corruptions problems with my test-cases. Finally today I ran the tests under valgrind and managed to track it down to mutable_queue (boost/pending/mutable_queue.hpp), which is used by the astar_search code to manage the set of partial solutions. mutable_queue is constructed with a vector of integers, index_array, sized to the initial size of the implicit graph (1 vertex in my case). Unfortunately, this vector is never resized, so calls to mutable_queue::push wind up walking off the end of the index_array vector as the graph gets expanded (by my astar_visitor::examine_vertex callback), with various undefined (but generally bad) side-effects. So, after some mucking around, I've wound up with a solution to this where I specialize mutable_queue for my graph's vertex type, leaving astar_search and the standard mutable_queue definitions alone. The specialization is basically a copy of mutable_queue.hpp, with a change to the push method to ensure that index_array is sized correctly before indexing into it. Problem solved, everything working like a charm. Now, is this a bug in mutable_queue? Reading the two-paragraph description in mutable_queue.hpp, I'd guess this is how it is supposed to act. This would mean that implicit search with astar_search (and presumably any other search) isn't supported, because the queue that it uses for partial results can't get bigger as the graph itself grows. The documentation probably shouldn't mention implicit search if this is the case, or maybe there is need for a non-const version of astar_search that can use a more appropriate queue type... My solution, though it seems to work fine, is a bit of a bodge... As a side-note, I initially thought that the memory corruption that I was seeing was a result of vertex iterators becoming invalidated as the graph was expanded. I attempted a switch over to using listS for the VertexList parameter of the adjacency_list template (from vecS), but this causes all sorts of compiler errors under gcc 4.1.2. I tried making a similar change to the astar_search example program (astar-cities.cpp) and this too fails to compile (with 1.33.1 and 1.34.1). Shouldn't listS and vecS for the VertexList parameter be interchangeable? Cheers, Oliver

1 1

Installed library names
by Yang Zhang 21 Apr '08

21 Apr '08

Hi, I'm working with a project whose build system passes -lboost_serialization as a flag to gcc. As far as I can tell from the configure options and from the Getting Started documentation, boost's installer only ever uses fully qualified names (libboost_serialization-gcc41-mt-1_35.so.1.35.0 on my system). Could the installer have possibly provided a libboost_serialization.so as well? Or did the authors of the project I'm trying to build probably manually create symlinks (or have their package manager create these) and assume that I would have the same? Thanks!

2 1

Re: [Boost-users] [multi_index] custom template class for handle multi_index map
by damny＠web.de 21 Apr '08

21 Apr '08

hi joaquin, you are a genius :o) the absent default copy ctor and assignment operator were the reason for my problem ... can't see the wood for the trees. thank you daniel _________________________________________________________________________ In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114

1 0

Mingw cross compilation
by James Choa 21 Apr '08

21 Apr '08

Hello everyone, Is there anyway for me to create a cross compilation version of the boost libraries? I have already compiled the linux version of the boost libraries and now I would like to compile a windows version of it. I'm using Fedora 8 with i386-mingw32 as my cross compiler (gcc 4.2.1). Any help would be greatly appreciated :) --James Choa

2 1

Re: [Boost-users] [multi_index] how to check if an iterator ist still valid
by joaquin＠tid.es 21 Apr '08

21 Apr '08

Kowalke Oliver (QD IT PA AS) escribió: > Hi, > how can I ensure that an iterator is still valid (item was not > removed from the index)? > Well, there is no legal way to determine whether an iterator is valid or not unless you already have this information from other sources (the state your program is in or other contextual info). The reason is that if you've got an invalid iterator you cannot do anything with it except assign it a new valid value: iterator it=cont.find(...); cont.erase(it); // "it" is now invalid *it; // ILLEGAL ++it; --it; // ILLEGAL it2=it; // ILLEGAL foo(it); // ILLEGAL, provided foo accepts "it" by value it=cont.find(...); // OK [That said, you can grossly abuse the functionality provided by Boost.MultiIndex's safe mode (http://www.boost.org/doc/libs/1_35_0/libs/multi_index/doc/tutorial/debug.ht… ) to check whether an iterator is valid, but this is totally non-recommendable as safe mode is a debugging aid and not program-level functionality, you really oughtn’t do it.] Joaquín M López Muñoz Telefónica, Investigación y Desarrollo

1 0

Facing problem while running sample code for filesystem
by Ashish Agrawal 21 Apr '08

21 Apr '08

Hi Users, I am very new user of Boost libraries. I am facing a problem while I am running a sample code of filesystem. My system is MAC OS X 10.4.11. I am executing following command for the attached .cpp file: c++ -I/usr/local/include/boost-1_35 test.cpp -o test \ /usr/local/lib/libboost_filesystem-mt-1_35.dylib I am getting following errors: /usr/bin/ld: warning can't open dynamic library: libboost_system-mt-1_35.dylib referenced from: /usr/local/lib/libboost_filesystem-mt-1_35.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) /usr/bin/ld: Undefined symbols: boost::system::get_posix_category() boost::system::get_system_category() boost::system::get_posix_category() referenced from libboost expected to be defined in libboost_system-mt-1_35.dylib boost::system::get_system_category() referenced from libboost expected to be defined in libboost_system-mt-1_35.dylib collect2: ld returned 1 exit status Thanks a lot in advance. -- Ashish Kumar Agrawal +41-76-358-5982

1 0

boost::serialization - duplicate symbol from portable_binary_*archive
by j.c. 21 Apr '08

21 Apr '08

If you include the file "portable_binary_iarchive.hpp" or "portable_binary_oarchive.hpp" in a common header the result is: ld: duplicate symbol boost ::archive ::detail ::archive_pointer_iserializer < portable_binary_iarchive >::find(boost::serialization::extended_type_info const&)in /Users/jo/ Documents/packet_serialization_test/build/ orchid_packet_serialization.build/Debug/ packet_serialization_test.build/Objects-normal/i386/packet_base.o and / Users/jo/Documents/packet_serialization_test/build/ orchid_packet_serialization.build/Debug/ packet_serialization_test.build/Objects-normal/i386/main.o

2 4

[multi_index] how to check if an iterator ist still valid
by Kowalke Oliver (QD IT PA AS) 21 Apr '08

21 Apr '08

Hi, how can I ensure that an iterator is still valid (item was not removed from the index)? regards,Oliver

1 0

Egg Review ends today
by dan marsden 20 Apr '08

20 Apr '08

The review of the Egg library by Shunsuke Sogame ends today. If anybody is still considering doing a review, please do still submit it, even if it is a few days late. It will take a short while for me to summarise the discussion during the review period. The review result will be posted shortly. Thanks Dan Marsden Review Manager __________________________________________________________ Sent from Yahoo! Mail. A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html

1 0

release 1_34 for borland
by Totte Karlsson 20 Apr '08

20 Apr '08

Hi I want to use boost threads classes with borland and I found that the latest release don't support borland compiler. How or where can I download a windows installer for boost release 1_34 ? thanks -totte

2 1

Re: [Boost-users] [multi_index] custom template class for handle multi_index map
by damny＠web.de 20 Apr '08

20 Apr '08

hi joaquin, a) here's a ready to use code snippet (see below). i isolating the problem by writing the snippet to the reuse of objects or using local temporary objects; i thought multi_index maps store copies of data objects, that where inserted. am i wrong? b) why it isn't possible to write (with "?" is a class attribute or template parameter; see snippet): template<typename MAP, typename ELM, typename SC1, typename IT1, typename SC2, typename IT2> const ELM *tCanMap<MAP,ELM,SC1,IT1,SC2,IT2>::getmapelm(STRING stNme) const { IT1 itr = this->_mpMap.get<?>().find(stNme); if ( itr != this->_mpMap.get<?>().end() ) { return &(*itr); } } thank you daniel //--- BEG ---------------------------------------------------------------------- #if defined(_Windows) || defined(_MSC_VER) || defined (__GNUC__) #define STRICT #include <windows.h> #endif #include <string> #define BOOST_MULTI_INDEX_ENABLE_INVARIANT_CHECKING #define BOOST_MULTI_INDEX_ENABLE_SAFE_MODE #include <boost/multi_index_container.hpp> #include <boost/multi_index/member.hpp> #include <boost/multi_index/mem_fun.hpp> #include <boost/multi_index/ordered_index.hpp> #include <boost/multi_index/hashed_index.hpp> //------------------------------------------------------------------------------ #define UINT32 unsigned long #define STRING std::string //------------------------------------------------------------------------------ // choose one //#define VERSION01 //#define VERSION02 //#define VERSION03 //#define VERSION04 //------------------------------------------------------------------------------ template<typename MAP, typename ELM, typename SC1, typename IT1, typename SC2, typename IT2> class tCanMap { protected: mutable MAP _mpMap; // map mutable SC1 *_scNme; // sorting criteria name ... have to init from derived class mutable SC2 *_scDat; // sorting criteria name ... have to init from derived class public: tCanMap (); MAP &getmap () const; UINT32 setmapelm (ELM val); #if defined (VERSION01) || defined (VERSION02) const ELM *getmapelm (STRING stNme) const; const ELM *getmapelm (UINT32 uiDat) const; #endif }; template<typename MAP, typename ELM, typename SC1, typename IT1, typename SC2, typename IT2> tCanMap<MAP,ELM,SC1,IT1,SC2,IT2>::tCanMap() { this->_scNme = NULL; this->_scDat = NULL; } template<typename MAP, typename ELM, typename SC1, typename IT1, typename SC2, typename IT2> MAP &tCanMap<MAP,ELM,SC1,IT1,SC2,IT2>::getmap() const { return this->_mpMap; } template<typename MAP, typename ELM, typename SC1, typename IT1, typename SC2, typename IT2> UINT32 tCanMap<MAP,ELM,SC1,IT1,SC2,IT2>::setmapelm(ELM val) { if (this!=NULL) { this->_mpMap.insert(val); return 0; } return 1; } #if defined (VERSION01) || defined (VERSION02) template<typename MAP, typename ELM, typename SC1, typename IT1, typename SC2, typename IT2> const ELM *tCanMap<MAP,ELM,SC1,IT1,SC2,IT2>::getmapelm(STRING stNme) const { try { if ( this!=NULL && this->_scNme!=NULL ) { IT1 itr = this->_scNme->find(stNme); if ( itr != this->_scNme->end() ) { return &(*itr); } } } catch(...) {} return NULL; } template<typename MAP, typename ELM, typename SC1, typename IT1, typename SC2, typename IT2> const ELM *tCanMap<MAP,ELM,SC1,IT1,SC2,IT2>::getmapelm(UINT32 uiDat) const { try { if ( this!=NULL && this->_scDat!=NULL ) { IT2 itr = this->_scDat->find(uiDat); if ( itr != this->_scDat->end() ) { return &(*itr); } } } catch(...) {} return NULL; } #endif //------------------------------------------------------------------------------ class cClass00 { private: STRING _nme; UINT32 _dat; public: cClass00() {} cClass00(STRING nme, UINT32 dat) { this->_nme=nme; this->_dat=dat; } STRING getnme () const { return this->_nme; } UINT32 getdat () const { return this->_dat; } }; typedef boost::multi_index_container < cClass00, boost::multi_index::indexed_by < boost::multi_index::hashed_unique < BOOST_MULTI_INDEX_CONST_MEM_FUN(cClass00,STRING,getnme) >, boost::multi_index::ordered_unique < BOOST_MULTI_INDEX_CONST_MEM_FUN(cClass00,UINT32,getdat) > > > mClass00; typedef mClass00::nth_index<0>::type mClass00ByNme; typedef mClass00ByNme::iterator mClass00ByNmeItr; typedef mClass00::nth_index<1>::type mClass00ByDat; typedef mClass00ByDat::iterator mClass00ByDatItr; //------------------------------------------------------------------------------ class cClass01 : public tCanMap<mClass00,cClass00,mClass00ByNme,mClass00ByNmeItr,mClass00ByDat,mClass00ByDatItr> { private: STRING _nme; UINT32 _dat; public: cClass01() {} cClass01(STRING nme, UINT32 dat) { this->_nme=nme; this->_dat=dat; this->_scNme = &(this->_mpMap.get<0>()); this->_scDat = &(this->_mpMap.get<1>()); } STRING getnme() const { return this->_nme; } UINT32 getdat() const { return this->_dat; } #if defined (VERSION03) || defined (VERSION04) const cClass00 *getmapelm (STRING stNme) const { try { if ( this!=NULL ) { mClass00ByNmeItr itr = this->_mpMap.get<0>().find(stNme); if ( itr != this->_mpMap.get<0>().end() ) { return &(*itr); } } } catch(...) {} return NULL; } const cClass00 *getmapelm (UINT32 uiDat) const { try { if ( this!=NULL ) { mClass00ByDatItr itr = this->_mpMap.get<1>().find(uiDat); if ( itr != this->_mpMap.get<1>().end() ) { return &(*itr); } } } catch(...) {} return NULL; } #endif }; typedef boost::multi_index_container < cClass01, boost::multi_index::indexed_by < boost::multi_index::hashed_unique < BOOST_MULTI_INDEX_CONST_MEM_FUN(cClass01,STRING,getnme) >, boost::multi_index::ordered_unique < BOOST_MULTI_INDEX_CONST_MEM_FUN(cClass01,UINT32,getdat) > > > mClass01; typedef mClass01::nth_index<0>::type mClass01ByNme; typedef mClass01ByNme::iterator mClass01ByNmeItr; typedef mClass01::nth_index<1>::type mClass01ByDat; typedef mClass01ByDat::iterator mClass01ByDatItr; //------------------------------------------------------------------------------ class cClass02 : public tCanMap<mClass01,cClass01,mClass01ByNme,mClass01ByNmeItr,mClass01ByDat,mClass01ByDatItr> { public: cClass02() { this->_scNme = &(this->_mpMap.get<0>()); this->_scDat = &(this->_mpMap.get<1>()); } #if defined (VERSION03) || defined (VERSION04) const cClass01 *getmapelm (STRING stNme) const { try { if ( this!=NULL ) { mClass01ByNmeItr itr = this->_mpMap.get<0>().find(stNme); if ( itr != this->_mpMap.get<0>().end() ) { return &(*itr); } } } catch(...) {} return NULL; } const cClass01 *getmapelm (UINT32 uiDat) const { try { if ( this!=NULL ) { mClass01ByDatItr itr = this->_mpMap.get<1>().find(uiDat); if ( itr != this->_mpMap.get<1>().end() ) { return &(*itr); } } } catch(...) {} return NULL; } #endif }; //------------------------------------------------------------------------------ int main(void) { #if defined (VERSION01) || defined (VERSION03) // works fine in any case cClass00 objClass00_01 = cClass00( "elm00_01", 1 ); cClass00 objClass00_02 = cClass00( "elm00_02", 2 ); cClass00 objClass00_03 = cClass00( "elm00_03", 3 ); cClass00 objClass00_04 = cClass00( "elm00_04", 4 ); cClass01 objClass01_01 = cClass01( "elm01_01", 11 ); cClass01 objClass01_02 = cClass01( "elm01_02", 12 ); objClass01_01.setmapelm( objClass00_01 ); objClass01_01.setmapelm( objClass00_02 ); objClass01_02.setmapelm( objClass00_03 ); objClass01_02.setmapelm( objClass00_04 ); cClass02 *ptrClass02_01 = new cClass02(); ptrClass02_01->setmapelm( objClass01_01 ); ptrClass02_01->setmapelm( objClass01_02 ); printf("START\n"); printf("\n"); printf( "1. try: %02d\n", ptrClass02_01->getmapelm("elm01_01")->getdat() ); printf( "2. try: %02d\n", ptrClass02_01->getmapelm("elm01_02")->getdat() ); printf("\n"); printf( "3. try: %02d\n", ptrClass02_01->getmapelm("elm01_01")->getmapelm("elm00_01")->getdat() ); printf( "4. try: %02d\n", ptrClass02_01->getmapelm("elm01_02")->getmapelm("elm00_04")->getdat() ); printf("\n"); printf( "5. try: %s\n", ptrClass02_01->getmapelm("elm01_01")->getmapelm(2)->getnme().c_str() ); printf( "6. try: %s\n", ptrClass02_01->getmapelm("elm01_02")->getmapelm(3)->getnme().c_str() ); printf("\n"); printf("DONE\n"); #elif defined (VERSION02) || defined (VERSION04) // run into segvault if object become overwritten OR // object for filling multi_index is only a local variable of a filling function cClass02 *ptrClass02 = new cClass02(); cClass01 objClass01; cClass00 objClass00; objClass01 = cClass01("elm01_01", 11); objClass00 = cClass00("elm00_01", 1); objClass01.setmapelm(objClass00); objClass00 = cClass00("elm00_02", 2); objClass01.setmapelm(objClass00); objClass01 = cClass01("elm01_02", 12); objClass00 = cClass00("elm00_03", 4); objClass01.setmapelm(objClass00); objClass00 = cClass00("elm00_04", 3); objClass01.setmapelm(objClass00); ptrClass02->setmapelm(objClass01); printf("START\n"); printf( "dat = %d\n", ptrClass02->getmapelm("elm01_01")->getdat() ); // seg_vault // printf( "dat = %d\n", ptrClass02->getmapelm("elm01_02")->getdat() ); // works fine printf("DONE\n"); #endif } //--- END ---------------------------------------------------------------------- ______________________________________________________ Bis 50 MB Dateianhänge? Kein Problem! http://freemail.web.de/club/landingpage.htm/?mc=025556

2 1

[thread] more problems with condition
by Anteru 20 Apr '08

20 Apr '08

Hi, I've posted this to the users list as well, but it might have got lost as I replied on the original thread. Well, I still have problems with the conditions, even with the latest SVN. The problem seems to be that inside a block like: Lock lock (mutex); while (something.empty ()) cond.wait (mutex); I'm still getting into a state where something.empty () == false and yet I'm waiting on the condition. The only other access happens via: Lock lock (mutex); something.push (...); cond.notify_one (); So I don't get it how something can go wrong, unless the transition from mutex.unlock () to cond.wait () is not fully atomic and the following happens: Thread 1: while (something.empty ()) cond.wait (mutex); // starts, releaes lock but is not waiting yet Now comes Thread 2: Lock lock (); something.push cond.notify_one (); // Nobody waiting lock.release (); Thread 1 again: cond.wait (mutex); // starts waiting I had a similar problem with my own condition implementation on Windows, with exactly the same syndromes (I've been following the "Strategies for Implementing POSIX Condition Variables on Win32" http://www.cs.wustl.edu/~schmidt/win32-cv-1.html - only got it working properly with SignalObjectAndWait). Currently, it always leaves exactly *one* thread waiting, while previously, it left several threads waiting, so it has improved but there is still a problem. Any ideas? Anything I can do to track this down further? Cheers, Anteru

3 3

[statechart] Using fast_pool_allocator along with state_machine
by Babi Seal 19 Apr '08

19 Apr '08

Hi, I would like to avoid fragmentation and perhaps reduce the time spent entering and leaving state in my state machine by leveraging the fast_pool_allocator. My very limited understanding of allocators comes from Scott Meyer's Effective STL and his references to articles on the Web. From reading the implementation of state_machine, I am not clear what the template-arguments for the UserAllocator should be if I wish to use the fast_pool_allocator as the UserAllocator parameter for state-machine. If I specified boost::fast_pool_allocator<int> does the library take care of somehow doing a rebind and allocating the right amount of memory for the states ? >From reading the changeset documentation (Point 2, Breaking Change of 14 August 2005) I see that " this considerably simplifies memory management customization. A user now only needs to pass his own allocator to state_machine<> and no longer has to separately overload operator new/delete for his state classes" Any guidance would be really appreciated ? Thanks #ifndef __STATE_H_INCL__ #define __STATE_H_INCL__ #include <boost/statechart/state_machine.hpp> #include <boost/statechart/state.hpp> #include <boost/statechart/transition.hpp> #include <boost/pool/pool_alloc.hpp> namespace sc = boost::statechart; // We need to forward-declare the initial state because it can // only be defined at a point where the state machine is // defined. struct Enabled; struct Machine : sc::state_machine< Machine, Enabled, boost::fast_pool_allocator< int > > /* ??? is this right ? */ { Machine(); ~Machine() { terminate(); } int ContextAssociatedwithStateMachine; }; #endif ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

[ptr_container] Pair type for boost::ptr_map?
by Robert Dailey 19 Apr '08

19 Apr '08

Hi, I have the following code: void HandlePair( std::pair<int, char*>& mypair ) { } void main() { boost::ptr_map<int, char> mymap; HandlePair( *mymap.begin() ); } What's the proper way to accept pairs in the HandlePair function? I can't seem to find a boost::ptr_pair anywhere, or something like that.

3 2

[program_options] debug assertion with options_description
by Nicholas Clark 19 Apr '08

19 Apr '08

I just received a huge application that uses boost for just about everything. I am receiving a debug assertion when trying to add program descriptions. To help isolate the error I have built a very simple example and am still getting the crash. For reference I am using boost 1.32. When I moved to any of the newer versions of boost this specific error goes away but I rack up a list of compiler errors a mile long. I am trying to fix this issue without moving to a newer version of boost because this is a legacy application and we have a minimum amount of time/budget. The last compiled version delivered by the old contractor does not have this error. This previous version was built with VS71 but we are using VS80 (with SP2) . could this be the difference? #include <boost/program_options.hpp> namespace po = boost::program_options; using namespace std; using namespace boost::program_options; int _tmain(int argc, _TCHAR* argv[]) { po::options_description desc("Allowed options"); desc.add_options() ("help,H", "produce help message") ; return 0; } Again a debug assert is triggered when calling 'add_options' with boost 1.32 but not in newer version using VS80 with SP2. Thanks! Nick --------------------------------------------------- Nicholas Clark (Nick) Sr. Computer Scientist ReallaeR, LLC ( <http://www.reallaer.com/> www.ReallaeR.com) (800) 816-1913 ext.316 <mailto:clark@reallaer.com> clark(a)reallaer.com

2 1

general question on testing
by Ovanes Markarian 18 Apr '08

18 Apr '08

Hello *, I have a question regarding testing. I would like to test my implementation how it bahaves in multi-threaded environment within different compilation units. Does anyone have ideas how I can generate from my c++ project (no perl or other scripting tools) (possibly with preprocessor ??) multiple compilation units in an automated way. Many thanks, Ovanes

2 2

spirit's functor_parser<functor>
by Olaf Peter 18 Apr '08

18 Apr '08

Hi, I'm using a lot of functor parsers and combine them in one grammar. Now, my grammar explodes at the time. Therefore I want to split/compile the functor parsers into separate files. This requires a forward declaration. Well, how to perform this?? spirit::functor_parser<functor> functor_p; is an instance. Thanks, Olaf

2 3

[regex] 1.35 missing lib on Windows?
by Larry 18 Apr '08

18 Apr '08

I built 1.35 on Windows XP using MS Visual Studio .NET 2003 using bjam --toolset=msvc-7.1 install No errors in the build. Including <boost/regex.hpp> in a cpp file compiles OK using IDE but the link fails missing libboost_regex-vc71-mt-gd-1_35.lib and the lib is not present in the "install" lib directory. The project is being built with compiler option /MDd. Is this a Boost build failure or should I have specified something else to get the lib created or to use a different lib? Anyone know? Larry

3 3

I can't build the boost with vc++6.0
by 김홍재 18 Apr '08

18 Apr '08

I built the bjam and then use following command to compile the boost 1.35.0. D:\boost_1_35_0>bjam -q --toolset=msvc But I had a error message, " .\boost/mpl/protect.hpp(27) : fatal error C1001: INTERNAL COMPILER ERROR". How can I resolve this? Plz, help me. Environment: Windows XP sp2 korean VC++6.0 Full message: D:\boost_1_35_0>bjam -q --toolset=msvc warning: Graph library does not contain optional GraphML reader. note: to enable GraphML support, set EXPAT_INCLUDE and EXPAT_LIBPATH to the note: directories containing the Expat headers and libraries, respectively. warning: skipping optional Message Passing Interface (MPI) library. note: to enable MPI support, add "using mpi ;" to user-config.jam. note: to suppress this message, pass "--without-mpi" to bjam. note: otherwise, you can safely ignore this message. Building Boost.Regex with the optional Unicode/ICU support disabled. Please refer to the Boost.Regex documentation for more information (don't panic: this is a strictly optional feature). ...patience... ...patience... ...found 3933 targets... ...updating 262 targets... MkDir1 bin.v2 MkDir1 bin.v2\libs MkDir1 bin.v2\libs\serialization MkDir1 bin.v2\libs\serialization\build MkDir1 bin.v2\libs\serialization\build\msvc-6.0 MkDir1 bin.v2\libs\serialization\build\msvc-6.0\release MkDir1 bin.v2\libs\serialization\build\msvc-6.0\release\threading-multi compile-c-c++ bin.v2\libs\serialization\build\msvc-6.0\release\threading- multi\basic_archive.obj basic_archive.cpp ........ ........ .\boost/mpl/protect.hpp(27) : fatal error C1001: INTERNAL COMPILER ERROR (compiler file 'msc1.cpp', line 1794) Please choose the Technical Support command on the Visual C++ Help menu, or open the Technical Support help file for more information call "C:\Program Files\Microsoft Visual Studio\VC98\Bin\VCVARS32.BAT" >nul cl /Zm800 -nologo @"bin.v2\libs\serialization\build\msvc- 6.0\release\threading-m ulti\binary_iarchive.obj.rsp" ...failed compile-c-c++ bin.v2\libs\serialization\build\msvc- 6.0\release\threadi ng-multi\binary_iarchive.obj... ...failed updating 1 target... ...updated 18 targets...

3 2

[Python] Debug Python (PY_DEBUG) libs and auto-linking
by Brian O'Kennedy 18 Apr '08

18 Apr '08

Hi, Apologies for the long email, but I figured I might as well be detailed in my explanation. My two questions are below regarding the process of building Boost.Python against a PY_DEBUG debug build of Python, and the failure of auto-linking of such debug libs of Boost.Python (those with 'gyd' in the name). I'm using both the Release and Debug versions of Python 2.5.1 on Windows compiled with Visual Studio 2005. The Debug version of python produces python_d.exe and python25_d.dll, while the release version uses python.exe and python25.dll. I've downloaded and built Boost 1.35.0 with the following steps: 1. Edit Jamroot as follows: (lines I add start with a "+" ) <define>BOOST_ALL_NO_LIB=1 + <define>_SECURE_SCL=0 # Used to encode variant in target name. See the I do this since our codebase is compiled without the secure iterators for performance reasons. This isn't relevant to my question, but I might as well mention it. Also, I add the following to build the debug python libs: # location of python local python-root = [ MATCH "^--with-python-root=(.*)" : [ modules.peek : ARGV ] ] ; PYTHON_ROOT ?= $(python-root) ; + using python : 2.5 : C:\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\PCbuild\\python.exe + : C:\\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\Include C:\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\PC + : C:\\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\PCbuild + : <python-debugging>off ; + using python : 2.5 : C:\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\PCbuild\\python_d.exe + : C:\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\Include C:\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\PC + : C:\\3rdparty\\Python\\Python-2.5.1-vc8sp1-Patch1\\PCbuild + : <python-debugging>on ; # Select the libraries to install. libraries = [ libraries-to-install $(all-libraries) ] ; I could also add this to my user-config.jam file but I got annoyed by bjam not picking that up if it is in the same folder as Jamroot, it would only find it if I put it in my user home. Then I trigger the builds using bjam: bjam.exe -d +2 --toolset=msvc --build-type=complete install bjam.exe -d +2 --toolset=msvc --with-python python-debugging=on install debug bjam.exe -d +2 --toolset=msvc --with-python python-debugging=off install release This gives me the complete Boost I want with the addition of the Release and Debug versions of Boost Python. The Debug version of Boost Python I'm after is boost_python-vc80-mt-gyd-1_35.dll and the release is boost_python-vc80-mt-1_35.dll So, my first question is: Surely there must be an easier way to do what I tried to achieve above? Should building a true debug (ie, a traditional python debug lib with PY_DEBUG enabled) version of Boost Python really take this much hackery? This is where people point out to me just how little I know about bjam / boost build... Second problem is the auto linking of.Boost Python. If I create an DLL application in Visual Studio 2005, set the include directories, set the library directories, set the output target as BoostPythonTest.pyd in Release, and BoostPythonTest_d.pyd in Debug, I get the following situation. BoostPythonTest.cpp #include <boost/python.hpp> char const* greet() { return "hello, world"; } BOOST_PYTHON_MODULE(BoostPythonTest) { using namespace boost::python; def("greet", greet); } This auto-links boost_python-vc80-mt-1_35.dll in Release mode just as it should and everything works just fine. In Debug mode, this auto links boost_python-vc80-gd-1_35.dll which is the Boost.Python debug lib which does not define PY_DEBUG which is not the behaviour I want. The Boost Python docs makes some reference to using BOOST_DEBUG_PYTHON to change the behavior of wrap_python.hpp but no such support seems to exist to modify the auto-linking behavior. To get my module to link to release python in release mode, and debug python via boost_python-vc80-mt-gyd-1_35.lib (with PY_DEBUG, ie python25_d.dll) in debug mode, I need to do the following: BoostPythonTest.cpp #define BOOST_PYTHON_NO_LIB #ifdef _DEBUG #define BOOST_DEBUG_PYTHON #pragma comment(lib, "boost_python-vc80-mt-gyd-1_35.lib" ) #else #pragma comment(lib, "boost_python-vc80-mt-1_35.lib" ) #endif #include <boost/python.hpp> char const* greet() { return "hello, world"; } BOOST_PYTHON_MODULE(BoostPythonTest) { using namespace boost::python; def("greet", greet); } I've had a look through the auto-linking code in boost and no special case seems to exist for the debug Python libraries. Once again, my question is whether this really is what I need to do to get Boost Python to play nicely with PY_DEBUG debug mode Python? Thanks for any advice, or general abuse for my misunderstanding on how to configure boost build properly. Brian Ps: If you do not do this and link to boost_python-vc80-gd-1_35.lib instead you get this warning when you try to import your lib into a debug python interpreter: >>> import BoostPythonTest Fatal Python error: Interpreter not initialized (version mismatch?) ________________________________________________________________________ This e-mail, and any attachment, is confidential. If you have received it in error, do not use or disclose the information in any way, notify me immediately, and please delete it from your system. ________________________________________________________________________

1 0

[filesystem] problems cross-compiling for QNX from windows host
by Guenther Stattenberger 18 Apr '08

18 Apr '08

Hi, I have some strange errors when cross-compiling some of the boost libraries for QNX on a windows host: According to the Jamfile, the filesystem library includes boost system in the linking stage NOT as a library (via e.g. -lboost_system-mt-d) but as a (shared) object. This has the effect, that somehow the current path of the libboost_system-mt-d.so file (e.g. bin.v2\libs\system\build\qcc\ debug\target-os-qnx\threadapi-pthread\threading-multi) is inserted into the filesystem library. Naturally, after moving the libraries to the QNX target this path isn't valid any longer. The runtime the complains "Could not find library ...". If I rename libboost_system-mt-d.so to have the path mentioned above prepended (not as a path, but really the filename, containing the backslashes) everything works fine. As a first workaround I decided to remove boost_system from the linking of boost_filesystem in the Jamfile and specify -lboost_system-mt-d in the link of my executable. This works fine, but unfortunately only up to the first exception. The program now gets aborted during unwind of the exception. The question now is: could somebody please indicate, why the boost_system library is not linked via the -l switch, and what is wrong trying to do this. Another solution might be to convince the linker not to include the compile-time path of the .so file but I was not successful trying this. Any help would be greatly appreciated. Thanks, Guenther

1 0

[lambda] Lambda for member access
by Robert Dailey 18 Apr '08

18 Apr '08

Hi, In the Boost.Lambda documentation, it has a section for operators that cannot be overloaded, but I'm not really sure if this means you cannot use these operators with lambda expressions. I have the following map: class SomeClass { public: void Foo() {} }; std::map<int, SomeClass> mymap; I want to be able to do std::for_each() on this map and use lambdas to call the Foo() member on each element in the map. For example: std::for_each( mymap.begin(), mymap.end(), _1.second.Foo() ); Obviously the above does not compile. Is there a way to make this work without doing some crazy template specialization? Thanks.

2 1

[Boost.Iostreams] Building iostreams with zlib support
by Andreas Profous 17 Apr '08

17 Apr '08

Hi, I'm trying to compile the following example code on Windows XP using MS Visual Studio 2005: -- from http://www.boost.org/libs/iostreams/doc/classes/zlib.html#installation ////////////////////////////// #include <fstream> #include <iostream> #include <boost/iostreams/filtering_streambuf.hpp> #include <boost/iostreams/copy.hpp> #include <boost/iostreams/filter/zlib.hpp> int main() { using namespace std; using namespace boost::iostreams; // added this line ifstream file("hello.z", ios_base::in | ios_base::binary); filtering_streambuf<input> in; in.push(zlib_decompressor()); in.push(file); boost::iostreams::copy(in, cout); } //////////////////////////////// So I downloaded the zlib library into the directory C:\Libs\zlib123 plus a prebuilt windows binary into the directory C:\Libs\zlib123\dll32 After reading http://www.boost.org/libs/iostreams/doc/installation.html I tried to add zlib.cpp to my test project, and to add the line #define BOOST_IOSTREAMS_NO_LIB to my source file. I got a bunch of linker errors, e.g. 1>zlib.obj : error LNK2019: unresolved external symbol _crc32 referenced in function "protected: void __thiscall boost::iostreams::detail::zlib_base::after(char const * &,char * &,bool)" (?after@zlib_base@detail@iostreams@boost@@IAEXAAPBDAAPAD_N@Z) 1>C:\Dev\Test\Test\Debug\Test.exe : fatal error LNK1120: 9 unresolved externals. If I delete ' #define BOOST_IOSTREAMS_NO_LIB' I get the following error: 1>LINK : fatal error LNK1104: cannot open file 'libboost_zlib-vc80-mt-gd-1_34_1.lib' Which is a file that doesn't exist. As I understand it I have to rebuild boost.iostreams with zlib support: C:\boost\boost_1_34_1\libs\iostreams\build>bjam "-sNO_COMPRESSION=0" "-sNO_ZLIB=0" "-sZLIB_SOURCE=C:\Libs\zlib123" "-sZLIB_LIBPATH=C:\Libs\zlib123\dll32" "-sZLIB_BINARY=zlibwapi.dll" I tried this and that but to be honest I don't really know what I'm doing and it didn't work. I would like to compile a static library and link my program against it, so that the example code works. It would also be ok to link it against a .dll - I don't really care, I just want to SOMEHOW use it! :) Can somebody give me detailed instructions on how to do that? Andreas

4 3

Re: [Boost-users] [multi_index] custom template class for handle multi_index map
by JOAQUIN M. LOPEZ MUÑOZ 17 Apr '08

17 Apr '08

________________________________________ De: boost-users-bounces(a)lists.boost.org [boost-users-bounces(a)lists.boost.org] En nombre de damny(a)web.de [damny(a)web.de] Enviado el: jueves, 17 de abril de 2008 21:13 Para: boost-users(a)lists.boost.org Asunto: [Boost-users] [multi_index] custom template class for handlemulti_index map > hi, > > i'm a newbie to boost an templates. > but for my interrest i experimentalise with that. > so i created an example like the following: [... ] > could you explain why the second try of using "getmapelm" results in an error? [...] Hi Daniel, I don't see any blatant mistake, but as your code is not complete and I therefore cannot compile it and run it I'm missing the problem. A shot in the dark: How's your STRING type hashed according to Boost.Hash? Remember that to use a user-defined type with Boost.Hash you have to define an appropriate hash_value overload as described at http://boost.org/doc/libs/1_35_0/doc/html/hash/custom.html If after examining this point your problem persists and you can provide a compilable snippet for me to run I can try to be a little more helpful. Joaquín M López Muñoz Telefónica, Investigación y Desarrollo

1 0

[thread] Condition::notify_one, wait
by Anteru 17 Apr '08

17 Apr '08

Hiho, I'm using the new Boost Threads for a Thread Pool, however, I've got some weird problems. The documentation of Condition::notify_one says it unblocks one of the threads waiting currently on the condition -- what happens if I have several threads waiting and I call notify_one twice? It seems that on Windows/x64/VC9, only on thread wakes up if notify_one is called twice in a row. Is this right? Second, wait says: "The thread will unblock when notified by a call to this->notify_one() or this->notify_all(), or spuriously". Is it likely that a condition unblocks spuriously? After all, I'd expect to unblock only after calling notify_* and not "by accident". Is there any way to get diagnostic output when a wait has been called spuriously? The problem I'm having at the moment is: I have PIMPLed Boost.Thread behind some simple wrappers, and I'm using them like this here: Lock lock (mutex_); if (queue.empty ()) { waitForItem.wait (lock); } with Lock being a wrapper for scoped_lock, mutex being a wrapper for mutex and waitForItem being a condition, and funnily enough it goes waiting even though there is an item in queue (i.e., queue.empty () == false). I'm not sure where this is coming from (all access to queue is protected using mutexes), only candidate at the moment is that when inserting, I call notify_one, and if two items get inserted one right after the other, I assume that only one thread is woken up and hence the other remains waiting although there is an item in the queue. It works when I use notify_all (), but this does not smell right to me :/ Thanks, Anteru

6 15

[multi_index] custom template class for handle multi_index map
by damny＠web.de 17 Apr '08

17 Apr '08

hi, i'm a newbie to boost an templates. but for my interrest i experimentalise with that. so i created an example like the following: =============================================================================================== template<typename MAP, typename ELM, typename SC1, typename IT1> class tCanMap { protected: mutable MAP _mpMap; // map mutable SC1 *_scNme; // sorting criteria name ... have to init from derived class public: tCanMap (); MAP &getmap () const; UINT32 setmapelm (ELM val); const ELM *getmapelm (STRING stNme) const; }; template<typename MAP, typename ELM, typename SC1, typename IT1> tCanMap<MAP,ELM,SC1,IT1>::tCanMap() { this->_scNme = NULL; } template<typename MAP, typename ELM, typename SC1, typename IT1> MAP &tCanMap<MAP,ELM,SC1,IT1>::getmap() const { return this->_mpMap; } template<typename MAP, typename ELM, typename SC1, typename IT1> UINT32 tCanMap<MAP,ELM,SC1,IT1>::setmapelm(ELM val) { if (this!=NULL) { this->_mpMap.insert(val); return 0; } return 1; } template<typename MAP, typename ELM, typename SC1, typename IT1> const ELM *tCanMap<MAP,ELM,SC1,IT1>::getmapelm(STRING stNme) const { try { if ( this!=NULL && this->_scNme!=NULL ) { IT1 itr = this->_scNme->find(stNme); if ( itr != this->_scNme->end() ) { return &(*itr); } } } catch(...) {} return NULL; } =============================================================================================== cClass00 { STRING nme; cClass00() {}; STRING getnme() { return this->nme; } } typedef boost::multi_index_container < cClass00, boost::multi_index::indexed_by < boost::multi_index::hashed_unique < BOOST_MULTI_INDEX_CONST_MEM_FUN(cClass00,STRING,getnme) > > > mClass00; typedef mClass00::nth_index<0>::type mClass00ByNme; typedef mClass00ByNme::iterator mClass00ByNmeItr; =============================================================================================== cClass01 : public tCanMap<mClass00,cClass00,mClass00ByNme,mClass00ByNmeItr> { STRING nme; cClass01() { this->_scNme = &(this->_mpMap.get<0>()); } STRING getnme() { return this->nme; } } typedef boost::multi_index_container < cClass01, boost::multi_index::indexed_by < boost::multi_index::hashed_unique < BOOST_MULTI_INDEX_CONST_MEM_FUN(cClass01,STRING,getnme) > > > mClass01; typedef mClass01::nth_index<0>::type mClass01ByNme; typedef mClass01ByNme::iterator mClass01ByNmeItr; =============================================================================================== cClass02 : public tCanMap<mClass01,cClass01,mClass01ByNme,mClass01ByNmeItr> { cClass02() { this->_scNme = &(this->_mpMap.get<0>()); } ... } =============================================================================================== int main (void) { cClass02 *ptClass02 = new cClass02(); ptClass02->fill_maps_with_elements(); ptClass02->getmapelm("cClass01_Element")->dosomething(); // this works ptClass02->getmapelm("cClass01_Element")->getmapelm("cClass00_Element")->dosomething(); // seg vault !!! ... } =============================================================================================== could you explain why the second try of using "getmapelm" results in an error? is there a better way to use a template class like above for handle a multi_index list as a member in similarly classes, whose objects should describe a hierarchical structure? (note: list shall have multiple indizes :o) i use boost 1.34.1 and gcc 3.4.5 (mingw special). many thanx daniel _____________________________________________________________________ Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000066

1 0

Re: [Boost-users] BGL problem
by Ronald Garcia 17 Apr '08

17 Apr '08

Hi Giuseppe, I have looked at your code, and it appears that you are not adding a graph_name property map to the dynamic_properties object. Not all graphs have a graph_name property, so it is necessary to use the property map interface to retrieve the graph name. Take a look at libs/graph/test/graphviz_test.cpp, specifically the lines: boost::ref_property_map<graph_t*,std::string> gname( get_property(graph,graph_name)); dp.property("name",gname); Hope this helps, ron On Mar 25, 2008, at 10:22 AM, Giuseppe Di Guglielmo wrote: > Dear Ronald, > I'm using Boost Graph Library. > > I saw this ticket > http://svn.boost.org/trac/boost/ticket/731 > GraphViz reader ignores graph properties. > > I am trying to read the graph name from a graph I loaded from a DOT > file, > but the property seems to be empty. I am not sure that is related > to this > ticket, anyway I hope you can help me. > > I attached a simple example, so it will be very fast for you to > compile > (edit the Makefile to point to your Boost installation library) and > run it. > > The result probably will be, as for me > $ ./runme.sh > The graph name is: '' > > The code to retrieve the graph name is > 57 // THE PROBLEM IS HERE! > 58 // The get_property(efsm_stg, boost::graph_name) function > does not > retrieve the graph name. > 59 boost::graph_property<efsm::stg_t, boost::graph_name_t>::type& > efsm_name = > get_property(efsm_stg, > boost::graph_name); > 60 std::cout << "The graph name is: \'" << efsm_name << "\'" << > std::endl; > 61 //-- > > Best regards, > Giuseppe > > > ---------------------------------------------------------------------- > ------ > Giuseppe Di Guglielmo Dept. of Computer Science - University of > Verona > Strada le Grazie, 15 - 37134 Verona > - Italy > > Phone Office: +39 045 8027049 Fax: +39 045 8027068 > Phone Home: +39 045 6152251 Mobile: +39 347 0493371 > > WWW: http://profs.sci.univr.it/~diguglielmo > > email: giuseppe.diguglielmo(a)univr.it > email: diguglielmo(a)certess.com Skype: giuseppe.diguglielmo > > ---------------------------------------------------------------------- > ------ > > > This e-mail message is intended for the addressee(s) only and may > contain > confidential and or privileged information. If you are not the > intended > recipient of this e-mail message, you should not read, copy, > forward or > otherwise distribute or further disclose the information in it. If > you have > received this e-mail message in error, please contact the > originator of this > e-mail message via e-mail and delete all copies of this message > from your > computer or network, thank you. > > > <graph_name.tgz>

1 0

[1.35, Boost.Test] error when using system in a test
by Christoph Duelli 17 Apr '08

17 Apr '08

The following (see below) test programm compiles under both 1.34.1 and 1.35.0; if linked against 1.35.0 it produces the following error message: Running 1 test case... A unknown location(0): fatal error in "test_call_system": child has exited; pid: 1000; uid: 16129; exit value: 0 *** 1 failure detected in test suite "Master Test Suite" With 1.34.1, no errors are found: Running 1 test case... A *** No errors detected Test program: #define BOOST_AUTO_TEST_MAIN "test-bug" #include <boost/test/auto_unit_test.hpp> BOOST_AUTO_TEST_CASE(test_call_system) { system("echo A"); } Yes, that's it! A single and simple system()-call. (I use these to setup/teardown my test environment; i.e. I create and remove a directory here, really. If there is a better way to do that: hints welcome!) Compiled with gcc 4.1.2 (SLES Linux 10), g++ -I/3rdparty/boost_1_34_1/include/boost-1_34_1 \ -L/3rdparty/boost_1_34_1/lib \ -lboost_unit_test_framework-gcc41 \ -DBOOST_TEST_DYN_LINK \ test.cpp Best regards Christoph

3 4

[boost.function] member function with default values for parameters
by Yan Drugalya 17 Apr '08

17 Apr '08

Folks, What is wrong with the code below: class SomeClass { public: int doSomething(int i=0) { return ++i; } }; boost::function2<int, SomeClass*, int> func = &SomeClass::doSomething; SomeClass sc; std::cout << func(&sc, 1); Currently I'm having following error: An object or reference of type "boost::function2<int,SomeClass *,int,std::allocat or<boost::function_base> >" cannot be initialized with an rvalue of type "int (SomeClass::*)(int)". If I remove default value for parameter i - everything compiles. Complier: VisualAge 7.0 Thanks

2 1

Xcode 3 compile issue
by Dave DeLong 17 Apr '08

17 Apr '08

Hi everyone, I'm attempting to build a project that links against the Boost library, but I keep running into this error: /Developer/SDKs/MacOSX10.5.sdk/usr/include/c++/4.0.0/i686-apple- darwin9/bits/c++locale.h:72: error: 'snprintf' is not a member of 'std' This has come up before on this list ( http://lists.boost.org/boost-users/2008/02/34157.php ), but it doesn't seem like there was an answer. How can I get rid of this? My project requires boost.... Specs: Mac OS X 10.5, Xcode 3.0, CoreDuo chipset Thanks! Dave DeLong

2 1

Mac Xcode 3.0 Boost compile issue
by Daniel Lord 17 Apr '08

17 Apr '08

This is a specific error with Xcode 3.0 on Leopard not a generic Boost question: Something is screwy with the paths between Boost and Xcode: Xcode 3.0 needs to find the Boost includes, so I added my directory containing the top of the Boost tree (the boost_1_34_1 directory) to the User header Search paths in the build configuration for the target. No problem, everything appears to be found. However, adding that search path screws up something else: An error pops up in c++locale.h highlighting the line: const int __ret = std::snprintf(__out, __size, __fmt, __prec, __v); and claiming: "error: 'snprintf' is not a member of 'std'." What the freak? It compiles fine from the command line with g++ and using -I<same path to boost as above>. So it is some wierd interaction with Boost and Xcode paths but it make no sense to me. It's almost as if Boost is redefining something. But what? This does not occur if I don't add the Boost search paths but of course then the Boost definitions are not found. The program is a simple one from O'Reilly's C+++ Cookbook show below: #include <boost/filesystem/operations.hpp> #include <boost/filesystem/fstream.hpp> #include <iostream> using namespace boost::filesystem; int main(int argc, char** argv) { if (argc < 2) { std::cerr << "Usage: " << argv[0] << " [dir name]\n"; return(EXIT_FAILURE); } path fullPath = // Create the full, absolute path name system_complete(path(argv[1], native)); if (!exists(fullPath)) { std::cerr << "Error: the directory " << fullPath.string( ) << " does not exist.\n"; return(EXIT_FAILURE); } if (!is_directory(fullPath)) { std::cout << fullPath.string( ) << " is not a directory!\n"; return(EXIT_SUCCESS); } directory_iterator end; for (directory_iterator it(fullPath); it != end; ++it) { // Iterate through each // element in the dir, std::cout << it->leaf( ); // almost as you would if (is_directory(*it)) // an STL container std::cout << " (dir)"; std::cout << '\n'; } return(EXIT_SUCCESS); }

2 1

Strange use of boost::scoped_ptr in Boost.Process
by Boris 17 Apr '08

17 Apr '08

I found this in the source code of Boost.Process (which is not an official Boost library): // XXX I'm not sure this usage of scoped_ptr is correct... boost::scoped_ptr< STARTUPINFO > si((STARTUPINFO*)new char[setup.m_startupinfo->cb]); I'm not sure either if this is correct. I don't know either why a char array is allocated and not STARTUPINFO directly. Does anyone know though if the code above is correct? STARTUPINFO is a POD (see http://msdn2.microsoft.com/en-us/library/ms686331(VS.85).aspx) Boris

1 0

[ublas] traits.hpp(97) vc8 error in DEBUG mode
by Markus Werle 17 Apr '08

17 Apr '08

Hi! This error occurs in DEBUG mode only. No testcase yet, but you probably have an idea anyway? regards, Markus [..snipped ...]\boost_1_35_0\boost\numeric\ublas\traits.hpp(97) : error C2784: 'boost::numeric::interval<T,Policies> boost::numeric::sqrt(const boost::numeric::interval<T,Policies> &)' : could not deduce template argument for 'const boost::numeric::interval<T,Policies> &' from 'const double' [..snipped...]\boost_1_35_0\boost\numeric\interval\arith2.hpp(198): see declaration of 'boost::numeric::sqrt' [..snipped...]\boost_1_35_0\boost\numeric\ublas\traits.hpp(93) : while compiling class template member function 'double boost::numeric::ublas::scalar_traits<T>::type_sqrt(const double &)' with [ T=double ] [..snipped...]\boost_1_35_0\boost\numeric\ublas\traits.hpp(151) : see reference to class template instantiation 'boost::numeric::ublas::scalar_traits<T>' being compiled with [ T=double ] [..snipped ...]\boost_1_35_0\boost\numeric\ublas\traits.hpp(97) : fatal error C1903: unable to recover from previous error(s); stopping compilation

1 0

Retrieving edges list
by Chartier Nicolas 17 Apr '08

17 Apr '08

I'm rather new with the use of the BGL, but I'd like to know how I could retrieve a weighted edges list from a graph, without forgetting vertices and weight, in a list for example, i.e. for n edges: Element 1 : egde 1; node 1’; node 1’’; weight 1 Element 2 : egde 2; node 2’; node 2’’; weight 2 ... Element n : egde n; node n’; node n’’; weight n Also, I’d like to know if I have different lists from different graphs, is there a mean to merge them into only one big list and to remove the unnecessary elements? Any suggestion welcome ;) NC

1 0

[Regex]Trouble building library for WM5 using Visual C++ 8 - boost release 1.35
by Brady Reed 17 Apr '08

17 Apr '08

Let me say up front that my goal is to build the regex lib with Visual C++ 8.0 using nmake and the supplied makefiles with as little modification to the boost sources as possible. In fact, I would like to limit customization for Windows Mobile 5 entirely to adding #define's to boost/config/user.hpp. Is this possible? It would certainly minimize the amount of work when upgrading boost. In order to minimize the number of files to keep under source control, I've moved only the regex-relevant files from the full zip extraction to the source control directories. I tested this by copying files from the 1.35 boost distribution until I had a clean XP desktop VC8 build. However, the output below shows where the WM5 build fails right out of the gate. There seems to be an stdlib issue with a missing 'strxfrm'. In order to build for WM5, I've taken the following steps so far: (1) Added to boost\config\user.hpp: #define BOOST_NO_STD_LOCALE #define BOOST_USE_WINDOWS_H //Undefine the WIN32 that was defined in the makefile command line #undef WIN32 // Define the appropriate versions of WinCE #define _WIN32_WCE 500 #define UNDER_CE 500 // Define processor type #define _ARM_ // Define compiler version #define _VC80_UPGRADE 0x0710 (2) After navigating to <boost>/boost/libs/regex/build, set the INCLUDE environment variable to (broken into lines here to help readability): C:\Program Files\Microsoft Visual Studio 8\VC\ce\include; C:\Program Files\Windows CE Tools\wce500\Windows Mobile 5.0 Pocket PC SDK\include; C:\Program Files\Windows CE Tools\wce500\Windows Mobile 5.0 Pocket PC SDK\include\ARMV4I; then invoke nmake -fvc8.mak all (3) The resulting output on the command line is: cl /nologo /MT /W3 /EHsc /O2 /GF /Gy /I..\..\..\ /D_MT /DWIN32 /DNDEBU G /D_MBCS /D_LIB /FD /Zc:wchar_t /c -Y- -Fo./vc80/libboost_regex-vc80-mt-s-1_3 5/ -Fdvc80/libboost_regex-vc80-mt-s-1_35.pdb ../src/c_regex_traits.cpp c_regex_traits.cpp ../src/c_regex_traits.cpp(54) : error C2039: 'strxfrm' : is not a member of 'std' ../src/c_regex_traits.cpp(54) : error C3861: 'strxfrm': identifier not found ../src/c_regex_traits.cpp(54) : fatal error C1903: unable to recover from previous error(s); stopping compilation NMAKE : fatal error U1077: '"C:\Program Files\Microsoft Visual Studio 8\VC\bin\cl.EXE"' : return code '0x2' Stop. In http://article.gmane.org/gmane.comp.lib.boost.user/32566/ it was stated that the regex lib should build out of the box for Windows Mobile. What am I doing wrong?

2 1

[breadth_first_search.hpp] -Link error : Segmentation Fault
by bijas kn 17 Apr '08

17 Apr '08

While I am trying to make an application (johnson-test) in Metrowerks CodeWarrior (ARMV5 UDEB) , I am getting the message : *armcc.exe** has encountered a problem and needs to close. *With error* ***Segementation fault *. This problem i am getting for the highlighted code given bolow... template <class IncidenceGraph, class Buffer, class BFSVisitor, class ColorMap> void breadth_first_visit (const IncidenceGraph& g, typename graph_traits<IncidenceGraph>::vertex_descriptor s, Buffer& Q, BFSVisitor vis, ColorMap color) { function_requires< IncidenceGraphConcept<IncidenceGraph> >(); typedef graph_traits<IncidenceGraph> GTraits; typedef typename GTraits::vertex_descriptor Vertex; typedef typename GTraits::edge_descriptor Edge; function_requires< BFSVisitorConcept<BFSVisitor, IncidenceGraph> >(); function_requires< ReadWritePropertyMapConcept<ColorMap, Vertex> >(); typedef typename property_traits<ColorMap>::value_type ColorValue; typedef color_traits<ColorValue> Color; typename GTraits::out_edge_iterator ei, ei_end; put(color, s, Color::gray()); vis.discover_vertex(s, g); Q.push(s); while (! Q.empty()) { Vertex u = Q.top(); Q.pop(); vis.examine_vertex(u, g); for (tie(ei, ei_end) = out_edges(u, g); ei != ei_end; ++ei) { Vertex v = target(*ei, g); vis.examine_edge(*ei, g); ColorValue v_color = get(color, v); if (v_color == Color::white()) { vis.tree_edge(*ei, g); put(color, v, Color::gray()); vis.discover_vertex(v, g); Q.push(v); } else { vis.non_tree_edge(*ei, g); if (v_color == Color::gray()) vis.gray_target(*ei, g); else vis.black_target(*ei, g); } } // end for put(color, u, Color::black()); vis.finish_vertex(u, g); //} // end while } // breadth_first_visit *Q.empty(), Q.pop(), Q.top(), ei!=ei.end* etc are creating problem Thanks & Regards Bijas K N 09886892854

1 0

[statechart] How to keep transition actions separated from the interface?
by Andre Massing 16 Apr '08

16 Apr '08

Hi, I am implementing a fsm for a kind of a project class, which tracks certain changes like adding special files or starting a computation. To keep the interface as small/clean as possible all interactions with the fsm should be soley processed by the process_event method. But seemingl I have to declare transition actions public in an outer state to make them available for inner state reactions/transitions. Is there any nice way to avoid this and to keep transition actions separated from the public interface? (Declaring *all* inner states which need access to be friend seems too ugly to me...) A small code snippet to demonstrate my issue: In Project.h: struct Idle; struct Project : sc::state_machine< Project, Idle > { public: //.... void solve(const EvSolve &); //... }; //... struct Idle : sc::simple_state< Idle, Project, mpl::list<GeoState, SolverState> > { typedef mpl::list< sc::custom_reaction< EvCompile >, sc::custom_reaction< EvSolve > > reactions; sc::result react(const EvCompile &); sc::result react(const EvSolve &); }; In Project.h: sc::result Idle::react(const EvSolve & ev) { //... return transit<Solve>(&Project::solve, ev); } Regards, Andre

3 16

Detecting cycles
by Chartier Nicolas 16 Apr '08

16 Apr '08

I wonder if someone knows an easy way to detect cycles in a graph. Any suggestion welcome ;) NC

4 3

wstring in serialization?
by dennis＠conus.info 16 Apr '08

16 Apr '08

Hello, >> c:/boost/boost/serialization/access.hpp:109: error: 'struct >> std::basic_string<wchar_t, std::char_traits<wchar_t>, >> std::allocator<wchar_t> >' has no member named 'serialize' >> >> So, is there wstring support for serialization, or I should write my >> own? > > Hi Dennis, > sure there is, did you include <boost/serialization/wstring.hpp>? At least in latest boost distribution, this file (wstring.hpp) is not exist.

2 2

Building Boost as Universal Binary on Mac OS X
by Thomas Hauk 16 Apr '08

16 Apr '08

I would like to build 1.35.0 Boost libs (especially date_time, filesystem, regex, system, and thread) on my G5 as Universal Binaries with bjam 3.1.16, so I can use them in a project with Xcode on both my G5 and my Intel-based MacBook Pro. (I was surprised they did not build that way by default). The command I used was: $> bjam --toolset=darwin --build-type=complete --with-thread --with- date_time --with-filesystem --with-regex --with-system I know they're just built PPC because I used the `file` command, e.g.: $> file libboost_system-mt-d-1_35.dylib libboost_system-mt-d-1_35.dylib: Mach-O dynamically linked shared library ppc Can anyone help? TIA, T -- "It's a very sobering feeling to be up in space and realise that one's safety factor was determined by the lowest bidder on a government contract.'' -- Alan Shepherd

2 2

[MPI] compilation error with msvc 64bit due to size_t datatype
by Andreas Buhr 16 Apr '08

16 Apr '08

Hello, I cannot compile boost.mpi with msvc 8.0 64bit. The complete error message is attached. The reason is that is_mpi_datatype<std::size_t> derives from mpl::true_ with the 32 bit compiler while it derives from mpl::false_ with the 64bit compiler. Unfortunately, I do not understand the reason, so I cannot fix it. I would be grad if someone could help. best regards, Andreas Buhr -- Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten Browser-Versionen downloaden: http://www.gmx.net/de/go/browser

3 3

Unhandled exception using directory_iterator
by Silvio Reis Junior 16 Apr '08

16 Apr '08

Hello friends! I'm trying to use directory_iterator but when I try to list recursivelly an entire drive or a big directory I get an unhandled exception. I'm trying to figure out if I did something wrong but the code is very similar to the example on the boost web page. Here is the code: //------------------------------------------------------------------- VOID CFileSearch::InternalSearch( path RootDir ) { directory_iterator EndDirItr; for ( directory_iterator DirItr( RootDir ); DirItr != EndDirItr; ++DirItr ) { if ( is_regular( DirItr->status() ) ) { _tprintf( "FILE: %s\n", DirItr->path().string().c_str() ); } else if ( is_directory( DirItr->status() ) ) { _tprintf( "DIR : %s\n", DirItr->path().string().c_str() ); InternalSearch( DirItr->path() ); } } } //------------------------------------------------------------------- VOID CFileSearch::Search( string RootDir ) { path TempRootDir = system_complete( path( RootDir, native ) ); if ( exists( TempRootDir ) == true ) { InternalSearch( TempRootDir ); } } //------------------------------------------------------------------- CFileSearch FileSearch; FileSearch.Search( "c:\\" ); Is there something wrong in the above code? Thank you in advance. Silvio.

4 8

wstring in serialization?
by dennis＠conus.info 16 Apr '08

16 Apr '08

Hello, I have a simple piece of code: void save_tbl (std::map<std::wstring, std::map<WORD, std::map<WORD, std::map<WORD, int> > > > & tbl) { std::ofstream ofs ("prj12_tbl.dat", std::ios::trunc | std::ios::binary ); boost::archive::binary_oarchive oa(ofs); assert (ofs.good()); oa << tbl; ofs.close(); }; Got this errors: c:/boost/boost/serialization/access.hpp: In static member function `static voidboost::serialization::access::serialize(Archive&, T&, unsigned int) [with Archive = boost::archive::binary_oarchive, T = std::basic_string<wchar_t, std::char_tr aits<wchar_t>, std::allocator<wchar_t> >]': c:/boost/boost/serialization/serialization.hpp:81: instantiated from `void boost::serialization::serialize(Archive&, T&, unsigned int) [with Archive = boost::archive::binary_oarchive, T = std::basic_string<wchar_t, std::char_traits<wchar_ t>, std::allocator<wchar_t> >]' c:/boost/boost/serialization/serialization.hpp:140: instantiated from `void boost::serialization::serialize_adl(Archive&, T&, unsigned int) [with Archive = boost::archive::binary_oarchive, T = std::basic_string<wchar_t, std::char_traits<w char_t>, std::allocator<wchar_t> >]' c:/boost/boost/archive/detail/oserializer.hpp:151: instantiated from `void boost::archive::detail::oserializer<Archive, T>::save_object_data(boost::archive::detail::basic_oarchive&, const void*) const [with Archive = boost::archive::binar y_oarchive, T = std::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >]' collect.cpp:149: instantiated from here c:/boost/boost/serialization/access.hpp:109: error: 'struct std::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >' has no member named 'serialize' So, is there wstring support for serialization, or I should write my own?

2 1

mathematical interval limits
by Tim Blechmann 16 Apr '08

16 Apr '08

hi all, is there a c++/boost.math way to find the highest representable floating point number lower than a certain limit ... something like boost::supremum<float>(1.f)? thanks, tim -- tim(a)klingt.org http://tim.klingt.org Avoid the world, it's just a lot of dust and drag and means nothing in the end. Jack Kerouac

2 2

empty a thread_group
by Axel 16 Apr '08

16 Apr '08

Hello I m using a boost::thread_group instance to handle a limited number of threads. When the thread_group reach a defined size, I cal join_all() on it and I wonder how I could clear it without having to keep a pointer to its threads and call remove_thread() for each one. I thought about destruct th thread_group instance but I m not sure it's a good idea, so any advice is welcome. Regards Axel

2 1

boost.function and phoenix.bind
by Sergei Politov 15 Apr '08

15 Apr '08

The following example: ============================================== #include <boost/function.hpp> #include <boost/spirit/phoenix.hpp> int main() { boost::function<void()> f; phoenix::bind(f); } ============================================== Produces compilation warning on MSVC 9.0: C:\work\cpp\bind.cpp : warning C4717: 'phoenix::functor_action<boost::function<void __cdecl(void),std::allocator<void> > >::functor_action<boost::function<void __cdecl(void),std::allocator<void> > >' : recursive on all control paths, function will cause runtime stack overflow And stack overflow in runtime. What is wrong in this example?

2 1

boost interprocess: managed_shared_memory overhead
by hgdhfdghsa＠Safe-mail.net 15 Apr '08

15 Apr '08

Hello again, I have one managed_shared_memory, which contains exactly one instance of a certain structure, allocated via MySegment.find_or_construct<TheClass>(interprocess::unique_instance)(...); How can I determine how big the segment must be? interprocess::managed_shared_memory ConfigurationManagerSegment(interprocess::open_or_create, "sharedMem", sizeof(TheClass)+x); //What should be x? Thank you

2 1

Re: [Boost-users] libboost_filesystem compile error in qnx
by Ricardo Perrone 15 Apr '08

15 Apr '08

Hi Guenther Thanks for help me, the compilation was a successfuly. Now, the libraries (regex, filesystem) are installed best regards Ricardo > Date: Fri, 11 Apr 2008 07:29:50 +0000 (UTC) > From: Guenther Stattenberger > Subject: Re: [Boost-users] libboost_filesystem compile error in qnx > To: boost-users(a)lists.boost.org > Message-ID: > Content-Type: text/plain; charset=us-ascii > > Hi, > > according to the QNX documentation, strerror itself is thread-safe, > therefore I thought it correct to add the QNX switch to > libs\system\src\error_code.cpp:86 > > # if defined(BOOST_WINDOWS_API) || defined(__hpux) || defined(__sun)\ > || (defined(__linux) && (!defined(__USE_XOPEN2K) || > defined(BOOST_SYSTEM_USE_STRERROR)))\ > || (defined(__osf__) && !defined(_REENTRANT))\ > || (defined(__vms))\ > || (defined(__QNXNTO__)) // <=================================== > > Any comments on that? > > In addition, I had to uncomment the case statement for EALREADY later in this > file. Since the QNX errno.h header defines > #define EALREADY EBUSY > it won't compile otherwise. > > Hope that helps. > > best regards > Guenther ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

1 0

string boost::split
by Dmitry Teslenko 15 Apr '08

15 Apr '08

Hello! For example I want to split string with single char '\t' delimeter. According to docs this can be done this way: std::vector<std::string> options; std::string sep; sep += '\t'; boost::split(options, line, boost::is_any_of(sep)); But if I want to use double tab as a delimiter? Is there an alternative to boost::is_any_of like "boost::just_what_i_say"

4 3

[serialization] Is anybody else having problems building serialization?
by John Femiani 15 Apr '08

15 Apr '08

Hi, I am having problems building the serialization library with svn HEAD. I checked out the boost trunk into C:/JOHN/hvm/src/boost, and recently I began seeing this when I build boost with vc8.0: C:\JOHN\hvm\src\boost>..\..\bin\bjam --build-type=complete --stagedir=..\..\ threading=multi link=static --toolset=msvc --with-serialization stage libs\config\test\Jamfile.v2:41: in modules.load rule compile-fail unknown in module Jamfile</C:/JOHN/hvm/src/boost/libs/config/test>. C:/JOHN/hvm/src/boost/tools/build/v2/build\project.jam:307: in load-jamfile C:/JOHN/hvm/src/boost/tools/build/v2/build\project.jam:63: in load C:/JOHN/hvm/src/boost/tools/build/v2/build\project.jam:116: in load-parent C:/JOHN/hvm/src/boost/tools/build/v2/build\project.jam:443: in initialize C:/JOHN/hvm/src/boost/tools/build/v2/build\project.jam:297: in load-jamfile C:/JOHN/hvm/src/boost/tools/build/v2/build\project.jam:63: in load C:/JOHN/hvm/src/boost/tools/build/v2/build\project.jam:167: in project.find C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:354: in find-really C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:408: in object(project-target)(a)79.find C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:827: in resolve-reference C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:843: in targets.generate-from-reference C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:1129: in generate-dependencies C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:1176: in object(typed-target)(a)84.generate C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:742: in generate-really C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:715: in object(main-target)(a)150.generate C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:254: in object(project-target)(a)79.generate C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:858: in targets.generate-from-reference C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:1129: in generate-dependencies C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:1179: in object(install-target-class)(a)70.generate C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:742: in generate-really C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:715: in object(main-target)(a)129.generate C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:858: in targets.generate-from-reference C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:1129: in generate-dependencies C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:1179: in object(alias-target-class)(a)76.generate C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:742: in generate-really C:/JOHN/hvm/src/boost/tools/build/v2/build\targets.jam:715: in object(main-target)(a)133.generate C:/JOHN/hvm/src/boost/tools/build/v2\build-system.jam:663: in load C:\JOHN\hvm\src\boost\tools\build\v2/kernel\modules.jam:267: in import C:\JOHN\hvm\src\boost\tools\build\v2/kernel/bootstrap.jam:134: in boost-build C:\JOHN\hvm\src\boost\boost-build.jam:11: in module scope It looks like an issue crept into the jam file recently because it _used_ to work. Any help here would be great! Thanks, John

1 0

boost::serialization - trying to serialize derived class and base class.
by j.c. 15 Apr '08

15 Apr '08

I am writing a packet base class that can be serialized. The class so far looks like: class packet_base { using namespace boost; public: packet_base(); ~packet_base(); friend class boost::serialization::access; template <typename Archive> void serialize(Archive & ar, const unsigned int version) { ar & m_length; ar & m_type; ar & m_method; } private: uint16_t m_length; uint16_t m_type; uint16_t m_method; }; The question now is how can I derive class A from packet_base and have both packet_base and A's variables serialized? Obviously base_class needs to be archived first so it's variables are at the front of the buffer. Thanks in advance. J

2 5

Problem building serialization with gcc mingw 3.4.5
by Markus Svilans 14 Apr '08

14 Apr '08

Dear mailing list, I am having some trouble building Boost 1.35.0, using gcc mingw 3.4.5. When building the serialization library, I get the following error message on many of the files: "wide char i/o not supported on this platform" The bjam command line I used is: bjam --build-dir="C:\boost_1_35_0\built" --toolset=gcc --with-serialization I've looked through some of the Boost configuration header files, and it seems that the BOOST_NO_STD_WSTREAMBUF value is not being #defined. (I was under the impression that gcc mingw 3.4.5 supports wide character i/o, is this correct?) Has anyone else had this problem, and is there a solution to getting serialization to build properly using my gcc compiler? Thanks very much, Markus.

1 0

boost.exception errors
by Olaf Peter 14 Apr '08

14 Apr '08

Hi, I've used the boost.exception from svn (Revision 44352) and got the compile errors: $ LANG=en g++ -I ../../3rd_party/boost-svn/ -Wall eh.cpp -o eh && ./eh ../../3rd_party/boost-svn/boost/exception/info.hpp: In function 'boost::shared_ptr<const typename ErrorInfo::value_type> boost::get_error_info(const E&) [with ErrorInfo = boost::error_info<boost::tag_throw_function, const char*>, E = boost::exception]': eh.cpp:21: instantiated from here ../../boost-svn/boost/exception/info.hpp:104: error: no matching function for call to 'boost::shared_ptr<const char* const>::shared_ptr(boost::shared_ptr<const boost::exception_detail::error_info_base>&, const char* const*)' /usr/include/boost/shared_ptr.hpp:144: note: candidates are: boost::shared_ptr<T>::shared_ptr() [with T = const char* const] /usr/include/boost/shared_ptr.hpp:131: note: boost::shared_ptr<const char* const>::shared_ptr(const boost::shared_ptr<const char* const>&) from this file: #include <boost/exception/exception.hpp> #include <boost/exception/info_tuple.hpp> #include <boost/exception/info.hpp> #include <exception> #include <boost/shared_ptr.hpp> #include <iostream> struct test_exception : boost::exception {}; int main() { try { throw test_exception() << BOOST_ERROR_INFO ; } catch( const boost::exception& e ) { using namespace boost; std::cerr << "Caught exception:\n" << e.what() << "\n"; shared_ptr<const char * const> function = get_error_info<throw_function>( e ); // shared_ptr<const char * const> file = get_error_info<throw_file>( e ); // shared_ptr<int* const> line = get_error_info<throw_line>( e ); // std::cerr << " in " << file << "(" << line << "): " << function << std::endl; } } BTW, the example_io.cpp doesn't compile too. Do I have to use the complete svn trunk? Thanks, Olaf

2 1

[serialization] 1.35 problem with explicit instantiation
by Dan Thill 14 Apr '08

14 Apr '08

With 1.34, I was using the pattern described by Robert (http://lists.boost.org/boost-users/2006/01/16293.php) with non-intrusive serialization. In short, the serialization functions are merely declared in the header files. They are implemented in the .cpp file, and then explicitly instantiated for each archive type I'm using. However, with 1.35, this no longer works. The export macros create an instance of the guid initializer as follows: export.hpp:150 BOOST_PP_CAT(boost_serialization_guid_initializer_, __LINE__) However, this gives me redefinition errors in the following situaion: ClassA.h -------- (line 1:) BOOST_CLASS_EXPORT(ClassA); ClassB.h -------- (line 1: )BOOST_CLASS_EXPORT(ClassB); main.cpp #include <ClassA.h> #include <ClassB.h> (create an archive instance and attempt to serialize) ------------------------------- As you can see, two objects, both named boost_serialization_guid_initializer_1, will be created, and the compiler (MSVC80) will give me a redefinition error. I honestly have no idea what's going on. This is so obvious, it has to mean that I'm organizing my code in some weird fashion. Thanks! Dan

5 17

Re: [Boost-users] [boost] [gil] [announcement] New IO lib
by Christian Henning 14 Apr '08

14 Apr '08

This is my bad. Sorry. It's basically the same address without the 's' in https. Here it is again: http://gil-contributions.googlecode.com/svn/trunk/gil_2/boost/gil/extension… Christian

1 0

[Boost.Test] reports incorrect memory leak
by mike 14 Apr '08

14 Apr '08

An extremely simple piece test, containing just one stack-created object, is causing boost.test to report a memory leak. I am using boost 1.34.1 compiled in windows using configure, bjam, & msvc90. I've copied my simple test case illustrating my problem below, and included the output it produces. As you can see, boost.test is being used, but the regex is part of microsoft's tr1. As a note, when I modify it to use boost's regex (with the commented-out changes seen in code), no such errors were reported. I'd like to say that obviously the SOLE problem lies in MS' beta tr1 implementation, but this code is so simple I don't get how that would be. Also, i believe the actual TR1 impl is from dinkumware and is supposed to be fully release ready (it is just the ms-CLI, etc, integration which leads to the beta designation)... Hopefully someone has more insight into this. Also, if someone has any tips on how to interpret the memory dump boost.test provides, I'd be interested in learning. Thanks in advance! //begin code// //file dumb_test.cpp //in a new, default solution w/ precompiled headers turned off, //all msvc files removed, and include_path += $(boost_root) //lib_path += $(boost_root)/stage/lib added #include <boost/test/unit_test.hpp> #include <regex> //#include <boost/tr1/tr1/regex> using boost::unit_test_framework::test_suite; using std::tr1::regex; //using boost::regex void dumb_test(){ regex rgx(""); //regex rgx("foo");//boost doesn't like empty rgx str } test_suite* init_unit_test_suite(int, char** const){ test_suite* suite = BOOST_TEST_SUITE("Core Tests"); suite->add(BOOST_TEST_CASE(&dumb_test)); return suite; } //end code// //begin output// Running 1 test case... *** No errors detected Detected memory leaks! //with boost::regex no mem leaks... Dumping objects -> {208} normal block at 0x00347DD8, 20 bytes long. Data: <p-J > 70 2D 4A 00 15 00 00 00 00 00 00 00 00 00 00 00 {207} normal block at 0x00347D90, 24 bytes long. Data: <|-J }4 > 7C 2D 4A 00 0E 00 00 00 00 00 00 00 D8 7D 34 00 {206} normal block at 0x00347D48, 24 bytes long. Data: < -J }4 > 88 2D 4A 00 0D 00 00 00 00 00 00 00 90 7D 34 00 {205} normal block at 0x00347CF8, 32 bytes long. Data: <p-J H}4 > 70 2D 4A 00 14 00 00 00 00 00 00 00 48 7D 34 00 Object dump complete. //end output//

4 3

bind with boost::filesystem::directory_iterator
by Brad 14 Apr '08

14 Apr '08

Hi guys and gals, I'm new to boost and this is my first attempt to use bind (big step LOL). I'm trying to do this: bfs::path p( "." ); bfs::directory_iterator dir_iter( p ); for_each( dir_iter.begin(), dir_iter.end(), boost::bind( &purgeOlder, _1 ) ) but I get: purgefiles.cpp:53: error: 'class boost::filesystem::directory_iterator' has no member named 'begin' purgefiles.cpp:53: error: 'class boost::filesystem::directory_iterator' has no member named 'end' It would appear directory_iterator does not have these members which are common on the other containers, am I missing something? Is there a way to do this using bind? Cheers, Brad

3 3

ptr_map trouble
by Pau Garcia i Quiles 14 Apr '08

14 Apr '08

Hello, I'm having trouble when adding elements to a ptr_map. If I use a ptr_vector instead, it works (code for ptr_map and ptr_vector follows). * With ptr_map: =============== #include <iostream> #include <string> #include <boost/function.hpp> #include <boost/any.hpp> #include <boost/ptr_container/ptr_map.hpp> class Base { }; class X : public Base { public: std::string text() { std::cout<< std::string("hello world!") << std::endl; return std::string("hello world!"); } }; class Y : public Base { public: int value() { return 5; } }; class Z : public Base { public: bool isEnabled() { return true; } }; // [...] // There will be hundreds of classes like X, Y and Z, only quite more complex class ProxyBase { public: virtual boost::any field() = 0; }; template<class T> class Proxy : public ProxyBase { typedef T result_type; public: Proxy(T& inst, boost::function<boost::any ( T )> f) : inst_(inst), f_(f) { ; }; boost::any field() { return boost::any( f_(inst_) ); } T& inst_; boost::function<boost::any ( T )> f_; }; int main() { boost::ptr_map<std::string, ProxyBase> m; X x; Proxy<X>* px = new Proxy<X>(x, boost::mem_fn(&X::text)); std::cout << "Calling a proxy object Proxy<X> outputs: " << boost::any_cast<std::string>( px->field() ) << std::endl; // m.insert(std::string("test"), px ); // FIXME Why does this 'insert' fail? // std::cout << "PTR_MAP Calling a proxy object Proxy<X> outputs: " << boost::any_cast<std::string>( m["test"].field() ) << std::endl; Y y; Proxy<Y>* py = new Proxy<Y>(y, boost::mem_fn(&Y::value)); std::cout << "Calling a proxy object Proxy<Y> outputs: " << boost::any_cast<int>( py->field() )<< std::endl; // m.insert(std::string("test2"), py); // FIXME Why does this 'insert' fail? // std::cout << "PTR_VECTOR Calling a proxy object Proxy<Y> outputs: " << boost::any_cast<int>( m["test2"].field() ) << std::endl; Z z; Proxy<Z>* pz = new Proxy<Z>(z, boost::mem_fn(&Z::isEnabled)); std::cout << "Calling a proxy object Proxy<Z> outputs: " << boost::any_cast<bool>( pz->field() )<< std::endl; // m.insert(std::string("test3"), pz); // FIXME Why does this 'insert' fail? // std::cout << "PTR_VECTOR Calling a proxy object Proxy<Z> outputs: " << boost::any_cast<bool>( m["test3"].field() ) << std::endl; return 0; } * With ptr_vector: ================== #include <iostream> #include <string> #include <boost/function.hpp> #include <boost/any.hpp> #include <boost/ptr_container/ptr_vector.hpp> class Base { }; class X : public Base { public: std::string text() { std::cout<< std::string("hello world!") << std::endl; return std::string("hello world!"); } }; class Y : public Base { public: int value() { return 5; } }; class Z : public Base { public: bool isEnabled() { return true; } }; // [...] // There will be hundreds of classes like X, Y and Z, only quite more complex class ProxyBase { public: virtual boost::any field( std::string name ) = 0; }; template<class T> class Proxy : public ProxyBase { typedef T result_type; public: Proxy(std::string name, T& inst, boost::function<boost::any ( T )> f) : name_(name), inst_(inst), f_(f) { ; }; boost::any field( std::string name ) { if( name == name_ ) { // Just a stub to simulate a container lookup return boost::any( f_(inst_) ); } } std::string name_; T& inst_; boost::function<boost::any ( T )> f_; }; int main() { boost::ptr_vector<ProxyBase> vec; X x; Proxy<X>* px = new Proxy<X>("test", x, boost::mem_fn(&X::text)); vec.push_back(px); std::cout << "Calling a proxy object Proxy<X> outputs: " << boost::any_cast<std::string>( px->field("test") ) << std::endl; std::cout << "PTR_VECTOR Calling a proxy object Proxy<X> outputs: " << boost::any_cast<std::string>( vec[0].field("test") ) << std::endl; Y y; Proxy<Y>* py = new Proxy<Y>("test2", y, boost::mem_fn(&Y::value)); vec.push_back(py); std::cout << "Calling a proxy object Proxy<Y> outputs: " << boost::any_cast<int>( py->field( "test2" ) )<< std::endl; std::cout << "PTR_VECTOR Calling a proxy object Proxy<Y> outputs: " << boost::any_cast<int>( vec[1].field("test2") ) << std::endl; Z z; Proxy<Z>* pz = new Proxy<Z>("test3", z, boost::mem_fn(&Z::isEnabled)); vec.push_back(pz); std::cout << "Calling a proxy object Proxy<Z> outputs: " << boost::any_cast<bool>( pz->field( "test3" ) )<< std::endl; std::cout << "PTR_VECTOR Calling a proxy object Proxy<Z> outputs: " << boost::any_cast<bool>( vec[2].field("test3") ) << std::endl; return 0; } -- Pau Garcia i Quiles http://www.elpauer.org (Due to my workload, I may need 10 days to answer)

2 1

[BoostTest] 1.35.0: valgrind complains about uninitialized memory
by peter.klotz＠ith-icoserve.com 14 Apr '08

14 Apr '08

valgrind 3.3.0 complains about uninitialized memory in BoostTest 1.35.0: ==31740== Syscall param sigaltstack(ss) points to uninitialised byte(s) ==31740== at 0x413D811: sigaltstack (in /lib/tls/libc-2.3.2.so) ==31740== by 0x80863D8: boost::execution_monitor::catch_signals(boost::unit_test::callback0<int> const&) (in Application) ==31740== by 0x80864AB: boost::execution_monitor::execute(boost::unit_test::callback0<int> const&) (in Application) ==31740== by 0x8084AD7: boost::unit_test::unit_test_monitor_t::execute_and_translate(boost::unit_test::test_case const&) (in Application) ==31740== by 0x8081492: boost::unit_test::framework_impl::visit(boost::unit_test::test_case const&) (in Application) ==31740== by 0x8076684: boost::unit_test::traverse_test_tree(boost::unit_test::test_suite const&, boost::unit_test::test_tree_visitor&) (in Application) ==31740== by 0x8076658: boost::unit_test::traverse_test_tree(boost::unit_test::test_suite const&, boost::unit_test::test_tree_visitor&) (in Application) ==31740== by 0x8080443: boost::unit_test::framework::run(unsigned long, bool) (in Application) ==31740== by 0x806E093: boost::unit_test::unit_test_main(boost::unit_test::test_suite* (*)(int, char**), int, char**) (in Application) The attached patch fixes this error by initializing the structure passed to syscall sigaltstack(). Best regards, Peter.

2 1

[Graph] Bug in depth_first_search
by Fonzi Chat 14 Apr '08

14 Apr '08

Hello, I'm trying to pass a distance_map PropertyMap into a depth_first_search call. I've done so without any problems for BFS and Dijkstra's, however I just cannot get DFS to update the distance_map. This is what I have: typedef adjacency_list<listS, vecS, directedS, no_property, property<edge_weight_t, int> > Graph; std::vector<int> d(NUMVERTICES); depth_first_search(G, visitor(*(new DFSVisitor(s, t))).distance_map(&d[0])); Where I have defined a DFSVisitor class that derives from dfs_visitor appropriately. I'm really stumped on this, so any help is appreciated. _________________________________________________________________ Get in touch in an instant. Get Windows Live Messenger now. http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refres…

1 0

Egg review period extended until April 20th
by dan marsden 13 Apr '08

13 Apr '08

Hi All The Egg review has run for 2 weeks now with zero reviews, which is obviously disappointing. There has been some good and pretty thorough discussion, and a couple of promises of reviews. As such, I'm extending the review period by 1 week until 20th April 2008. Please do post a review if you have any interest in this library. In case anybody is unsure, in the case of zero votes being posted, the default result will be a rejection. Please lets make sure we don't have to fall through to this default case. Introduction: It is not so easy to define Function Objects especially if you want to support Boost.ResultOf and Boost.Lambda. Therefore, as Boost provides iterator_facade and iterator adaptors, Egg provides function_facade and function adaptors. Egg provides the following features: * Workaround for the Forwarding Problem http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2002/n1385.htm * Helpers to build Function Objects: * egg::function and egg::function_facade provides the way to build Function Objects which supports Boost.ResultOf and Lambda. * Function Objects Adaptors(in other words, higher-order functions): * egg::curryN supports the currying. * egg::pipable emulates extension methods(C#). * egg::fuse/unfuse emulates variadic functions. * egg::nestN represents nested lambda expressions. * etc... The documentation is on line: http://p-stade.sourceforge.net/boost/libs/egg/ The zipped source code is in Vault/FunctionObjects: http://tinyurl.com/34lgda Tested under: Boost Development Trunk and Boost Version1.34.1. --------------------------------------------------- Please always state in your review, whether you think the library should be accepted as a Boost library! Additionally please consider giving feedback on the following general topics: - What is your evaluation of the design? - What is your evaluation of the implementation? - What is your evaluation of the documentation? - What is your evaluation of the potential usefulness of the library? - Did you try to use the library? With what compiler? Did you have any problems? - How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? - Are you knowledgeable about the problem domain? Thanks Dan Marsden Review Manager ___________________________________________________________ Yahoo! For Good helps you make a difference http://uk.promotions.yahoo.com/forgood/

1 0

[Random] Differing values from minstd_rand in v1.35.0
by Greg Landrum 13 Apr '08

13 Apr '08

Dear all, After moving from boost 1.34.1 to 1.35.0 I have noticed that the sequence of values returned by the minstd_rand generator has changed. The following code snippet generates different values with 1.35.0 than it did with 1.34.x and 1.33.x: //------------------------- typedef boost::minstd_rand rng_type; typedef boost::uniform_int<> distrib_type; typedef boost::variate_generator<rng_type &,distrib_type> source_type; rng_type generator(42u); unsigned int seeds[] = {12,23,42}; distrib_type dist(0,INT_MAX); source_type randomSource(generator,dist); for(unsigned int i=0;i<3;++i){ generator.seed(seeds[i]); std::cerr << seeds[i]; for(unsigned int j=0;j<5;++j){ unsigned int bit = randomSource(); std::cerr<<" "<<bit%1024; } std::cerr<<std::endl; } //------------------------- Output with v1.35.0: 12 691 854 1010 690 696 23 444 337 394 1000 751 42 404 8 37 977 972 and with v1.34.1: 12 691 844 854 975 292 23 214 852 444 337 394 42 883 404 943 348 8 If I use the mt19937 generator instead of minstd_rand, the sequences are the same across versions. In the event it matters, I'm using g++ v4.1.3 on an Ubuntu Linux system. Is this user error, the result of a bug fix in Boost.Random, a new bug in Boost.Random, or is my expectation that the output of the RNG should not change across releases unreasonable? Thanks in advance for any help. Best Regards, -greg

1 0

boost.interprocess dynamic segment size?
by hgdhfdghsa＠Safe-mail.net 13 Apr '08

13 Apr '08

Hello, in my application I am forced to create a shared memory segment whose size can change at runtime. Is it possible to implement such a shared memory segment using the boost.interprocess library? I do not want to pre-allocate a big shared memory segment, as in most cases the segment is small (about 100bytes). Just in some very rare cases it gets very big (5MB or even more). Thank you

4 7

Hide the predicate type of a filter_iterator?
by Jean-Pierre Bergamin 13 Apr '08

13 Apr '08

Hello everyone Imagine a class "numbers" that contains some values and methods like getEvenValues(), getOddValues(), getValuesLarger100() etc. Those methods return an iterator range of filter_iterators. In the the code I posted below, I'd have to define a different iterator_range of filter_iterator types for all the different methods (numbers::EvenFilterRange, numbers::OddFilterRange etc.). Is there some way to "hide" the type of the predicate used in a filter_iterator, so that it would be possible to have a generic "NumberRange" type for the return values of all methods? Something like: class numbers { typedef NumberRange ????; NumberRange getEvenValues() const; NumberRange getOddValues() const; NumberRange getValuesLarger100() const; } Thanks for your hints James /*********************************************/ #include <vector> #include <iostream> #include <boost/iterator/filter_iterator.hpp> #include <boost/iterator/counting_iterator.hpp> #include <boost/range/iterator_range.hpp> using namespace std; using namespace boost; /*********************************************/ template<typename T> struct is_even { bool operator()(const T &t) { return t % 2 == 0; } }; template<typename T> struct is_odd { bool operator()(const T &t) { return t % 2 != 0; } }; /*********************************************/ class numbers { public: typedef vector<int> NumberContainer; typedef NumberContainer::const_iterator NumberIter; typedef iterator_range< filter_iterator< is_even<numbers::NumberContainer::value_type>, NumberIter> > EvenFilterRange; numbers() { copy( counting_iterator<NumberContainer::value_type>(0), counting_iterator<NumberContainer::value_type>(100), back_inserter(m_vec) ); } template<typename Pred> iterator_range<filter_iterator<Pred, NumberIter> > getValues(const Pred &pred) { return make_iterator_range( make_filter_iterator(pred, m_vec.begin(), m_vec.end()), make_filter_iterator(pred, m_vec.end(), m_vec.end()) ); } EvenFilterRange getEvenValues() { typedef is_even<numbers::NumberContainer::value_type> PredType; PredType is_even_predicate; return getValues(is_even_predicate); }; private: NumberContainer m_vec; }; /*********************************************/ template<typename T> struct print_number { void operator()(const T &t) { cout << "Number: " << t << endl; } }; /*********************************************/ int main() { numbers n; numbers::EvenFilterRange even_filter_range = n.getEvenValues(); print_number<numbers::NumberContainer::value_type> printer; for_each(begin(even_filter_range), end(even_filter_range), printer); }

2 3

Best way to share data in an object between two threads?
by boost＠celticblues.com 13 Apr '08

13 Apr '08

WinXP, Visual Studio 2003 I have a dialog based application which consists of the main thread and a data collection thread. The main thread updates a graph from data read by the data collection thread. I want to use an object, which is of type MyData to share the data between the threads. So , basically the data collection thread which collects data from a piece of hardware and places it in the MyData object, then the main thread reads from the MyData object and updates the graph. After reading a bit on shared memory, managed mapped memory etc. in Boost, I am a bit confused on how to do this. What is the best boost classes to use for this? Will I also need a sync object to synchronize the threads? Thanks, Ed

2 1

Re: [Boost-users] [boost] [gil] [announcement] New IO lib
by Christian Henning 12 Apr '08

12 Apr '08

I'm sorry my link to the library needs a password. Instead, please use the following link: http://gil-contributions.googlecode.com/svn/trunk/gil_2/boost/gil/extension… > Is there any documentation yet? No, not yet. My announcement is all I have so far. I'll work on it. > > Definately get this added to the review queue. If nothing else it > will create lots > of interesting discussions. Nice work. I'll be using it. Thanks. I hope people will start a discussion. Christian

1 0

(no subject)
by lolsson＠comhem.se 12 Apr '08

12 Apr '08

Hello! I'm having problems building boost 1.35 on a solaris machine with gcc 3.4.2. Pretty early on I get: gcc.compile.c++bin.v2/libs/test/build/gcc-3.4.2/release/threading-multi/debug.o /usr/ccs/bin/as: "/var/tmp//ccLNzYoL.s", line 3775: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp//ccLNzYoL.s", line 3815: error: cannot use v8plus instructions in a non-v8plus target binary ..... Here's some info about my system: $ uname -a SunOS se06pluto 5.8 Generic_117350-51 sun4u sparc SUNW,Sun-Fire-880 $ gcc -v Reading specs from /usr/local/lib/gcc/sparc-sun-solaris2.8/3.4.2/specs Configured with: ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls --disable-libgcj --enable-languages=c, c++ Thread model: posix gcc version 3.4.2 I have found the following thread which seems to address my problem: http://www.nabble.com/-detail--sparc-v8plus-build-problem-td7944960.html After reading this I'm still unsure about what to do. Should I edit tools/build/v2/tools/gcc.jam and do something with one of these lines? # Sparc flags gcc OPTIONS <architecture>sparc/<address-model>32 : -m32 ; flags gcc OPTIONS <architecture>sparc/<address-model>64 : -m64 ; cpu-flags gcc OPTIONS : sparc : c3 : -mcpu=c3 : default ; cpu-flags gcc OPTIONS : sparc : v7 : -mcpu=v7 ; cpu-flags gcc OPTIONS : sparc : cypress : -mcpu=cypress ; cpu-flags gcc OPTIONS : sparc : v8 : -mcpu=v8 ; cpu-flags gcc OPTIONS : sparc : supersparc : -mcpu=supersparc ; cpu-flags gcc OPTIONS : sparc : sparclite : -mcpu=sparclite ; cpu-flags gcc OPTIONS : sparc : hypersparc : -mcpu=hypersparc ; cpu-flags gcc OPTIONS : sparc : sparclite86x : -mcpu=sparclite86x ; cpu-flags gcc OPTIONS : sparc : f930 : -mcpu=f930 ; cpu-flags gcc OPTIONS : sparc : f934 : -mcpu=f934 ; cpu-flags gcc OPTIONS : sparc : sparclet : -mcpu=sparclet ; cpu-flags gcc OPTIONS : sparc : tsc701 : -mcpu=tsc701 ; cpu-flags gcc OPTIONS : sparc : v9 : -mcpu=v9 ; cpu-flags gcc OPTIONS : sparc : ultrasparc : -mcpu=ultrasparc ; cpu-flags gcc OPTIONS : sparc : ultrasparc3 : -mcpu=ultrasparc3 ; Or is there something else I can do? Thanks, Lars

3 2

[Graph] distance_map Property not working for DFS?
by Fonzi Chat 12 Apr '08

12 Apr '08

Hello, I just started using the Boost graph library a few days ago, so I am pretty new to all of this. What I'm trying to do is to record the path distance between a given source and target vertex using a variety of algorithms. So far, I've gotten BFS and Dijkstra's working correctly, however I'm having some trouble having distance information recorded in my distance_map Property when attempting to do this with DFS. For instance, this is what I wrote for Dijkstra's: dijkstra_shortest_paths(G, s, distance_map(&d[0]).visitor(*(new DijkstraVisitor(s, t)))); where G is a Graph, s is the start Vertex, d is defined as an integer vector and DijkstraVisitor is a class I have defined that is used as the visitor for the algorithm. Similarly, for DFS I have: depth_first_search(G, visitor(*(new DFSVisitor(s, t))).distance_map(&d[0]).root_vertex(s)); Unfortunately, when I try reading the d vector, all the values are zero and seem to have never been updated. My question is: what am I doing wrong and what can I do to record the distance correctly? Another somewhat related problem I have is that the algorithms seem to take VERY long to complete when larger graphs are processed. For instance, a graph with 100 vertices and 10,000 edges (mesh topology) takes about 10 minutes to complete the shortest path problem between two given vertices. Is this normal? Thank you for putting up with my amateur questions! Any and all help is appreciated. _________________________________________________________________ Get in touch in an instant. Get Windows Live Messenger now. http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refres…

1 0

Help me for spirit grammar definition! It is simple...
by 钱晓明 11 Apr '08

11 Apr '08

I want to use spirit parsing some text file. The very basic element in those files is string, float and int. For example: 123L "hello" 987.4343 I wrote my grammar class: struct pm_parser : public grammar<pm_parser> { template <typename ScannerT> struct definition { definition(pm_parser const& self) { factor = int_p[show_int()]>>"L" | '"'>> *((~ch_p('"'))[show_char()]) >>'"' | real_p[show_double()] ; } rule<ScannerT> factor; rule<ScannerT> const& start() const { return factor; } }; }; show_int, show_char, show_double are structs used to show int, char and double value. When I parse 1L, it works. But when I parse 1, it is parsed twice(int_p and real_p are all works). How can I define grammar struct to parse text above without errors?

2 1

Synchronized queue
by Yang Zhang 11 Apr '08

11 Apr '08

Hi, does boost provide a synchronized queue (or anything that is a concurrent producer-consumer abstraction)? Thanks!

2 1

boost::algorithm + SunStudio + QuantLib
by Hicham Mouline 11 Apr '08

11 Apr '08

I extracted parts of QuantLib0.8.1 that I try to compile with CC on CC: Sun C++ 5.8 Patch 121017-13 2008/01/02 Studio11 i think The failure is in "dataparsers.cpp", line 86: Error: Could not find a match for std::string::basic_string(boost::transform_iterator<boost::algorithm::detail::to_lowerF<char>, const char*, boost::use_default, boost::use_default>, boost::transform_iterator<boost::algorithm::detail::to_lowerF<char>, const char*, boost::use_default, boost::use_default>) needed in boost::algorithm::to_lower_copy<std::string>(const std::string &, const std::locale&). the snippet from quantlib that uses this is : std::string sub = flist[i]; if (boost::algorithm::to_lower_copy(sub) == "dd") the function complained about from boost/algorithm/string/case_conv.hpp //! Convert to lower case /*! \overload */ template<typename SequenceT> inline SequenceT to_lower_copy( const SequenceT& Input, const std::locale& Loc=std::locale()) { return SequenceT( make_transform_iterator( begin(Input), detail::to_lowerF< typename value_type_of<SequenceT>::type >(Loc)), make_transform_iterator( end(Input), detail::to_lowerF< typename value_type_of<SequenceT>::type >(Loc))); } the same version of QL/boost compile ok on x86-64-linux/g++4.1 and win32-intel10 and other combinations any clues appreciated, regards,

1 0

[iterator] Writable transform_iterator: how to?
by Nicola 11 Apr '08

11 Apr '08

Hello, I cannot figure out why the following code is wrong: #include <iostream> #include <vector> #include <functional> #include <boost/iterator/transform_iterator.hpp> struct f : public std::unary_function<int, int&> { int& operator()(int& x) { return x; } }; typedef std::vector<int> vec_type; typedef boost::transform_iterator<f, vec_type::iterator> trans_iter_type; int main() { vec_type V; V.push_back(4); trans_iter_type it(boost::make_transform_iterator(V.begin(), f())); std::cout << *it << std::endl; *it = 8; std::cout << *it << std::endl; return 0; } The compiler (g++ 4.0.1) complains about dereferencing and the error message says: error: passing ‘const f’ as ‘this’ argument of ‘int& f::operator()(int&)’ discards qualifiers Nicola

2 7

[1.35.0][xpressive] INVALID_REGULAR_EXPRESSION - why?
by Markus Werle 11 Apr '08

11 Apr '08

Hi! The following piece of code used to compile with previous versions of boost: using namespace boost::xpressive; sregex path_delimiter = '/'; Now it bails out on VC8 SP1 with (beautified output): ------ Build started: Project: XXXX, Configuration: Release Win32 ------ Compiling... MainFrm.cpp MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/proto/matches.hpp(356) : error C2825: 'Expr': must be a class or namespace when followed by '::' MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/detail/static/grammar.hpp(317) : see reference to class template instantiation 'boost::proto::result_of::matches<Expr,Grammar>' being compiled with [ Expr=char, Grammar=boost::xpressive::Grammar<char> ] MY_PATH_TO_BOOST\boost_1_35_0\boost/mpl/if.hpp(63) : see reference to class template instantiation 'boost::xpressive::is_valid_regex<Expr,Char>' being compiled with [ Expr=char, Char=char ] MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/basic_regex.hpp(94) : see reference to class template instantiation 'boost::mpl::if_<T1,T2,T3>' being compiled with [ T1=boost::xpressive::is_valid_regex<char,char>, T2=boost::mpl::true_, T3=boost::xpressive::INVALID_REGULAR_EXPRESSION ] .\MainFrm.cpp(1514) : see reference to function template instantiation 'boost::xpressive::basic_regex<BidiIter>::basic_regex<char>(const Expr &)' being compiled with [ BidiIter=std::_String_const_iterator<char,std::char_traits<char>, std::allocator<char>>, Expr=char ] MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/proto/matches.hpp(356) : error C2143: syntax error : missing ',' before '`global namespace'::proto_base_expr' MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/proto/matches.hpp(356) : error C2977: 'boost::proto::detail::matches_impl' : too many template arguments MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/proto/matches.hpp(260) : see declaration of 'boost::proto::detail::matches_impl' MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/proto/matches.hpp(357) : error C2955: 'boost::proto::detail::matches_impl' : use of class template requires template argument list MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/proto/matches.hpp(260) : see declaration of 'boost::proto::detail::matches_impl' MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/basic_regex.hpp(94) : error C2664: 'boost::mpl::assertion_failed' : cannot convert parameter 1 from 'boost::mpl::failed ************boost::xpressive::INVALID_REGULAR_EXPRESSION::* ***********' to 'boost::mpl::assert<false>::type' No constructor could take the source type, or constructor overload resolution was ambiguous MY_PATH_TO_BOOST\boost_1_35_0\boost/xpressive/basic_regex.hpp(95) : error C2514: 'boost::xpressive::is_valid_regex<Expr,Char>' : class has no constructors with [ Expr=char, Char=char ] Build What went wrong? Changing the code to sregex path_delimiter = sregex::compile("/"); fixes the issue for me, but I missed this change in the release notes ... Markus

2 2

Re: [Boost-users] libboost_filesystem compile error in qnx
by Ricardo Perrone 11 Apr '08

11 Apr '08

> Ricardo Perrone wrote: > > Hi, > > > > I am trying to compile/install boost libraries (1.35.0 > > version) and some erros appears in console: > > > Does anybody know how to solve this? My qcc/QCC is set > > to 3.3.5,gcc_ntox86. The same error appears when i try > > with bjam > > No but it helps if you put the library name in the title so the author is > made aware of the issue :-) > you're right :-) > Looks like a configuration issue: does QNX have the POSIX re-entrant std lib > functions such as strerror_r ? If not there's probably a macro that can set > (or maybe unset) somewhere in Boost.System to solve this. > > John. i agree with you, but considering that i am a new user and i don't have so much experience to configure appropriately, how can i check this std lib? In $BOOS_ROOT/boost/config/platform/qnxnto.hpp there are the following default informations: // QNX specific config options: #define BOOST_PLATFORM "QNX" #define BOOST_HAS_UNISTD_H #include <boost/config/posix_features.hpp> // QNX claims XOpen version 5 compatibility, but doesn't have an nl_types.h // or log1p and expm1: #undef BOOST_HAS_NL_TYPES_H #undef BOOST_HAS_LOG1P #undef BOOST_HAS_EXPM1 #define BOOST_HAS_SCHED_YIELD #define BOOST_HAS_PTHREADS #define BOOST_HAS_PTHREAD_MUTEXATTR_SETTYPE #define BOOST_HAS_GETTIMEOFDAY #define BOOST_HAS_CLOCK_GETTIME #define BOOST_HAS_NANOSLEEP At this moment i am using QNX 6.3.2 and i don' t know what is the macro that enables the std lib functions in accordance with POSIX. Thanks Ricardo __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[boost::function] how to parametrize? (re-send)
by Pau Garcia i Quiles 10 Apr '08

10 Apr '08

Hello, (There were some errors in the parametrized.cpp source file in my original submission, they are fixed now) I'm trying to implement something like the registerField/field methods of QWizard from Qt ( http://doc.trolltech.com/4.4beta/qwizard.html#registering-and-using-fields ) but without Qt. Long story short, what I'm trying to do is to have a list of member functions I should call to get a value from an instance of a class. There will be *hundreds* of different classes with different accessor methods (sometimes it will be called "value()", others "text()", yet in other cases it may be "isEnabled()"). Return types will also be different, but that's already solved by boost::any. I'm attaching two examples of what I want to achieve: * nonparametrized.cpp: it works fine but it's not parametrized * parametrized.cpp: it's essentially the nonparametrized.cpp code but introducing a new class called "Proxy" which has a "field" method which should receive the parameters boost::function needs. Problem is, for parametrized.cpp I cannot figure what the signature of the "field" method (line 27) should be in order to call it for different objects (see lines 48, 61 and 74). I'm not even sure I need to specify those three parameters! Can you help me? Code can be compiled against Boost 1.34.1 (not tested against 1.35.0) with: g++ -o nonparametrized nonparametrized.cpp -lboost_signals Thank you. -- Pau Garcia i Quiles http://www.elpauer.org (Due to my workload, I may need 10 days to answer)

1 0

Re: [Boost-users] Boost.Exception
by Emil Dotchevski 10 Apr '08

10 Apr '08

I assume that it will be in the 1.36 release. Until then, you can get it from the current Boost development code at http://svn.boost.org/svn/boost/trunk/. The only thing missing from there at the moment is the new behavior of boost::throw_exception as described here: http://revergestudios.com/boost-exception/throw_exception.html. This will be added as soon as I finish working on minor compile errors and workarounds for various compilers/platforms (probably by the end of this week due to slow turnaround of the tests on some platforms.) -- Emil Dotchevski Reverge Studios, Inc. http://www.revergestudios.com/reblog/index.php?n=ReCode --------------- From: Olaf Peter <ope-devel <at> gmx.de> Subject: Boost.Exception Newsgroups: gmane.comp.lib.boost.user Date: 2008-04-10 06:08:18 GMT (15 hours and 52 minutes ago) with interest I did follow the discussion about boost.exeception some times ago. At http://www.revergestudios.com/boost-exception/boost-exception.html I read: Note: Boost Exception was accepted as a Boost library on November 7, 2007; however it has not yet been part of an official Boost release. Why is it not in release 1.35?? Is it safe to use it out of the boost distribution (concerning API changes). Thanks, Olaf

1 0

[boost::function] how to parametrize?
by Pau Garcia i Quiles 10 Apr '08

10 Apr '08

Hello, I'm trying to implement something like the registerField/field methods of QWizard in Qt ( http://doc.trolltech.com/4.4beta/qwizard.html#registering-and-using-fields ) but without Qt. Long story short, what I'm trying to do is to have a list of member functions I should call to get a value from an instance of a class. There will be *hundreds* of different classes with different accessor methods (sometimes it will be called "value()", others "text()", yet in other cases it may be "isEnabled()"). Return types will also be different, but that's already solved by boost::any. I'm attaching two examples of what I want to achieve: * nonparametrized.cpp: it works fine but it's not parametrized, i. e. * parametrized.cpp: it's essentially the nonparametrized.cpp code but introducing a new class called "Proxy" which has a "field" method which should receive the parameters boost::function needs. Problem is, for parametrized.cpp I cannot figure what the signature of the "field" method (line 27) should be in order to call it for different objects (see lines 48, 61 and 74). I'm not even sure I need to specify those three parameters! Can you help me? Code can be compiled against Boost 1.34.1 (not tested against 1.35.0) with: g++ -o nonparametrized nonparametrized.cpp -lboost_signals Thank you. -- Pau Garcia i Quiles http://www.elpauer.org (Due to my workload, I may need 10 days to answer)

1 0

Boost ofstream.h include
by Jeffery Cavallaro 10 Apr '08

10 Apr '08

I am just starting to use the filesystem library, so AIA if this has already been covered... It looks like filesystem/fstream.hpp is not included in filesystem.hpp in 1.35.0. In fact, it seems like it is the only include file in the filesystem subdir that doesn't get included in the by including filesystem.hpp. Was this an oversight, on purpose, or did I do something wrong? Thanks! -- Jeffery Cavallaro, 1055 Joaquin-191A Infrastructure Engineering Google Inc. 1600 Amphitheatre Parkway Mountain View, CA 94043 650-214-2552

1 0

[statechart] Running one scheduler in many threads
by Manuel Jung 10 Apr '08

10 Apr '08

Hi, The fifo_scheduler is limited to one execution at a time. I would like a schedule object, which can handle many processors in many threads at the same time. Lika a threadpool, where the threads takeover a fsm, when it has events posted and processes them then. But it should of course only one thread at a time process events from one machine. Maybe someone has done this and can show me his code? Or tell me if this is even possible? Greetings Manuel Jung

2 1

Kudos to 1.35.0 release managers
by Jeffery Cavallaro 10 Apr '08

10 Apr '08

All of those people who are responsible for the 1.35.0 release deserve a big round of applause. I was starting to worry about the project getting off track. No more doubts. The new website L&F is slick. The documentation links are complete. The download is complete. Everything looks on track for convergence with C++ 09. Great work people! -- Jeffery Cavallaro, 1055 Joaquin-191A Infrastructure Engineering Google Inc. 1600 Amphitheatre Parkway Mountain View, CA 94043 650-214-2552

2 1

Problems with char* serialization
by Ariel Brunetto 10 Apr '08

10 Apr '08

Hello! My name is Ariel and this is my first time with boost. I spent a few days looking arround the serialization library, and right now I have a project with my first serialized classes. I spent some time reading the documentation and the tutorial. I am having problems serializing pointers. I am trying to serialize a const char* and it seems that doesn't work in the trivial way. This is my code: //----------------------------------------------------------------------------- // myserializeclass.h //----------------------------------------------------------------------------- #include <fstream> #include <boost/archive/binary_iarchive.hpp> #include <boost/archive/binary_oarchive.hpp> #include <boost/serialization/base_object.hpp> //----------------------------------------------------------------------------- class MySerializeClass { private: friend class boost::serialization::access; template<class Archive> void serialize(Archive & ar, const unsigned int uiVersion) { ar & m_pChar; } // members to serialize public: char* m_pChar; }; //----------------------------------------------------------------------------- BOOST_CLASS_TRACKING(MySerializeAbstractBase, ::boost::serialization::track_never) //----------------------------------------------------------------------------- //----------------------------------------------------------------------------- // myserializeclass.cpp //----------------------------------------------------------------------------- int main() { MySerializeClass MySerializeClassObject; std::ofstream ofs(akFilename); boost::archive::binary_oarchive oa(ofs); oa << MySerializeClassObject; return 0; } //----------------------------------------------------------------------------- It doesn't compile. I get the following error: 1>c:\program files\microsoft visual studio 8\vc\platformsdk\include\boost\serialization\access.hpp(109) : error C2228: left of '.serialize' must have class/struct/union I know that this is my mistake, but I don't know how to fix it ;). I know that there is a lot of consideration about pointer serialization. Could you point me in the right direction? Thanks in advance! Ariel

5 10

Access to underlying system thread
by Yang Zhang 10 Apr '08

10 Apr '08

Hi, I like using boost threads, but I'm currently working on a project where I need to access the private handle to the underlying system thread (in the cases I'm concerned about, the pthread_t). This is so that I can take advantage of platform-specific functionality, such as setting CPU affinity and (more generally) calling into other libraries that expect a pthread_t. Is there any way to do get this handle? Thanks! -- Yang Zhang http://www.mit.edu/~y_z/

3 7

[Boost Graph] Undefined symbols when loading a dynamic library using boost graphs
by Toni 10 Apr '08

10 Apr '08

Hi to everyone in the list. First of all, thanks in advance for your help and your time, that I'm pretty sure is very valuable. I will try to describe the problem I'm getting while using boost graph's library. I've been developping an algorithm that makes use of the boost graph library. During the development, I coded everything in a cpp file and made some testing. In this phase all my code was compiled and linked within an executable file and everything worked fine. Imagine that my code was the following one (this code actually does nothing but it is enough to explain the problems I'm experiencing): void f1 (void) { Graph g (100); for (unsigned i = 1; i < 100; i++) boost::add_edge (i - 1, i, g); boost::graph_traits<Graph>::edge_iterator it, it_end; for (boost::tie (it, it_end) = boost::edges (g); (it != it_end); it++); } int main (void) { f1 (); return 0; } This example program compiled, linked and executed fine. Once my code was ready, I decided to integrate this code into the library it should go. This library is a dynamic library that is loaded by another program with dlopen, and some symbols are read from it and used. So, imagine the following scenario (again, very simplified, but enough to explain the problem): main.cc: int main (void) { char* libpath = "mylib.so"; void* handle; handle = dlopen (libpath, RTLD_NOW | RTLD_GLOBAL); // Some symbols are read with dlsym return 0; } mylib.cc: extern "C" bool someFunction (int* data) { // do some things return true; } void f1 (void) { Graph g (100); for (unsigned i = 1; i < 100; i++) boost::add_edge (i - 1, i, g); boost::graph_traits<Graph>::edge_iterator it, it_end; for (boost::tie (it, it_end) = boost::edges (g); (it != it_end); it++); } Both the main program and the library compile fine, but when I try to execute the program I get undefined symbols errors: /home/me/lib/mylib.so: undefined symbol: _ZneIN5boost6detail20undirected_edge_iterISt14_List_iteratorINS0_9list_edgeIjNS0_11no_propertyEEEENS1_14edge_desc_implINS0_14undirected_tagEjEEiEEEiRKT_SE_ If I demangle the symbol I get: c++filt _ZneIN5boost6detail20undirected_edge_iterISt14_List_iteratorINS0_9list_edgeIjNS0_11no_propertyEEEENS1_14edge_desc_implINS0_14undirected_tagEjEEiEEEiRKT_SE_ int operator!=<boost::detail::undirected_edge_iter<std::_List_iterator<boost::list_edge<unsigned int, boost::no_property> >, boost::detail::edge_desc_impl<boost::undirected_tag, unsigned int>, int> >(boost::detail::undirected_edge_iter<std::_List_iterator<boost::list_edge<unsigned int, boost::no_property> >, boost::detail::edge_desc_impl<boost::undirected_tag, unsigned int>, int> const&, boost::detail::undirected_edge_iter<std::_List_iterator<boost::list_edge<unsigned int, boost::no_property> >, boost::detail::edge_desc_impl<boost::undirected_tag, unsigned int>, int> const&) The problem is, I think, that the operator!= is not compiled within the dynamic library for some reason. Any hints or ideas to solve the problem? Thanks again for your time.

1 0

Unordered not 1.35.0?
by Andreas Klöckner 10 Apr '08

10 Apr '08

Hi all, I just updated to 1.35.0 from an old-ish svn snapshot, only to learn that boost/unordered_{map,set}.hpp are not in the release. I thought unordered had gotten accepted *way* before 1.35? Thanks, Andreas

3 2

any advantage of using property_map over std::map
by Abir Basak 10 Apr '08

10 Apr '08

Though it is a stupid question, is there any advantage i will get if i use boost property_map instead of std::map for my name value property pairs ? I am working for a statistical system, where i have certain parameter names (20-50 names at max) mostly fixed defined in terms of compile time constants (enums) but sometimes are from a variable set, and values which changes during adaptation (a small statistical distribution struct contains mean & sigma usually). so far i have used things like, enum height{ class1, class2,class3}; struct dist{ float mean; float sigma; }; typedef std::map<height,dist> height_prop; ( i also thought of having a compile time lookup based on a lookup table, but not sure if that is worth esp when search is among small no of elements) and similarly other properties. so will i get any benefit using boost::property_map instead of std::map (or unordered_map ) . in future i may want these properties to be associated with a Boost graph node & edge. thanks abir

1 0

[1.35] Weird behavior while building bjam under linuxx86_64 platform.
by Lian Cheng 10 Apr '08

10 Apr '08

Hi, all I'm trying to build boost 1.35 within a RedHat x86-84 box. The gcc version information is here: $ gcc -v Reading specs from /usr/lib/gcc/x86_64-redhat-linux/3.4.5/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-java-awt=gtk --host=x86_64-redhat-linux Thread model: posix gcc version 3.4.5 20051201 (Red Hat 3.4.5-2) $gcc --version gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2) Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. While building bjam by invoking $BOOST_ROOT/tools/jam/build_dist.sh, I got error messages as following: ./bootstrap/jam0 -f build.jam --toolset=gcc --toolset-root= clean ...found 1 target... ...updating 1 target... ...updated 1 target... ./bootstrap/jam0 -f build.jam --toolset=gcc --toolset-root= ...found 47 targets... ...updating 2 targets... [MKDIR] :bin.linuxx86_64 <--- *NOTICE THIS LINE* [COMPILE] :bin.linuxx86_64/bjam filemac.c:115:5: warning: C++ style comments are not allowed in ISO C90 filemac.c:115:5: warning: (this will be reported only once per input file) /tmp/ccjqZ5Qv.o(.text+0x903): In function `var_expand': : undefined reference to `path_parse' /tmp/ccjqZ5Qv.o(.text+0x9ee): In function `var_expand': : undefined reference to `path_build' /tmp/ccjqZ5Qv.o(.text+0xa1d): In function `var_expand': : undefined reference to `path_parent' [...] You see, the bin directory name is ":bin.linuxx86_64" rather than "bin.linuxx86_64". Weird? I've build boost 1.35 successfully under cygwin, and the bin directory name is exactly "bin.cygwinx86". I think it is this wrong directory name that causes following linkage errors. Is it a bug or I missed something obvious in the documentation? Any suggestion is appreciated! -- Cheers Cheng

1 0

Boost.Exception
by Olaf Peter 10 Apr '08

10 Apr '08

with interest I did follow the discussion about boost.exeception some times ago. At http://www.revergestudios.com/boost-exception/boost-exception.html I read: Note: Boost Exception was accepted as a Boost library on November 7, 2007; however it has not yet been part of an official Boost release. Why is it not in release 1.35?? Is it safe to use it out of the boost distribution (concerning API changes). Thanks, Olaf

1 0

boost.variant as argument
by Olaf Peter 10 Apr '08

10 Apr '08

Hi, I've wrapped a variant<double,bool> into a tuple. Unpacking the tuple works as far I can see. I want to print the tuple for doubles with one pretty print functor and for booleans with another functor (not shown here). Anyway, variant_print takes a long argument list as the error message shows. How can I pass it convinient? I guess, inside the variant_print I have to use the vistor to dispatch the print functors, isn't? BTW, fusion could be used? On debian/linux 1.35 is not released yet, so I use 1.34.1. Thanks, Olaf ---8<--- #include <boost/variant.hpp> #include <boost/tuple/tuple.hpp> #include <boost/tuple/tuple_io.hpp> #include <iostream> struct pretty_print { pretty_print( double d ) : m_d( d ) { } std::ostream& print_on( std::ostream& os ) const { os << m_d; return os; } double m_d; }; std::ostream& operator<<( std::ostream& os, const pretty_print& p ) { return p.print_on( os ); } struct variant_print { // ????????? variant_print(::boost::variant<double, bool>& v) { } }; using namespace std; using namespace boost::tuples; using namespace boost; int main() { typedef variant<double, bool> double_variant; typedef tuple<double_variant> double_tuple; double_tuple v1; double_tuple v2; get<0>( v1 ) = 3.14; get<0>( v2 ) = true; // This works cout << pretty_print( get<double>( get<0>( v1 ) ) ) << endl; // This not cout << variant_print( get<0>( v1 ) ) << endl; } --->8--- $ LANG=en g++ -Wall tuple.cpp -o tuple && ./tuple tuple.cpp: In function 'int main()': tuple.cpp:55: error: no match for 'operator<<' in 'std::cout << variant_print(((boost::variant<double, bool, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&)((boost::variant<double, bool, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>*)boost::tuples::get [with int N = 0, HT = boost::variant<double, bool, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>, TT = boost::tuples::null_type](((boost::tuples::cons<boost::variant<double, bool, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>, boost::tuples::null_type>&)(& v1.boost::tuples::tuple<boost::variant<double, bool, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>, boost::tuples::null_type, boost::tuples::null_type, boost::tuples::null_type, boost::tuples::null_type, boost::tuples::null_type, boost::tuples::null_type, boost::tuples::null_type, boost::tuples::null_type, boost::tuples::null_type>::<anonymous>))))))' ...

2 4

i18n
by Olaf Peter 09 Apr '08

09 Apr '08

Hi, what would be the best approach for a new software project running on unix/win/osx regards to i18n? As may point of view there are gettext using with boost.format or gnu::autosprintf. What would be the adavantages/disadvantages of these? Any experience, other possibilities? Thanks, Olaf

4 3

[asio] Implementation of multi-threaded support
by Yang Zhang 09 Apr '08

09 Apr '08

Hi - at least on Linux, how does boost asio implement multithreaded support for io::run? Is there a single thread blocking on select() (which I believe isn't thread-safe given the same sets), which others interrupt (EINTR) via pipes? Thanks for any explanation!

1 0

[boost-users] Windows Installer for Boost 1.35.0
by Klaim 09 Apr '08

09 Apr '08

Hello, I'd like to know if an installer for boost 1.35.0 is planned? Currently only 1.34.1 and previous versions of the installer are provided on the boost-consulting website.

1 0

[python] howto expose iterator / range with parameter?
by Jörg Becker 09 Apr '08

09 Apr '08

Hello, I want to expose a begin and end method which takes one argument and returns an iterator as a python iterator. Here is an example: struct range_test { typedef std::list< int > my_type; typedef my_type::iterator iterator; my_type m_vals; my_type::iterator begin ( int i ) { return m_vals.begin(); } my_type::iterator end ( int i ) { return m_vals.end();} }; class_< range_test >( "range_test" ) .def( "get_iter", range( &range_test::begin, &range_test::end ) ) ; If I import this, python exists immediately without any error message. Trying it with wrappers, I get a (gcc) compile error saying my wrapper function is not a class, struct, or union type: range_test::iterator begin( range_test & t, int i ) { return t.begin( i ); } range_test::iterator end( range_test & t, int i ) { return t.end( i ); } class_< range_test >( "range_test" ) .def( "get_iter", range( &range_test::begin, &range_test::end ) ) .def( "iter_wrapper", range( begin, end ) ) ; So I'm wondering how to expose such iterators, e.g. a method taking a predicate and returning a filter_iterator. Thanks for any help Jörg

1 0

[serialzation] Portable binary archives
by Daniel Oberhoff 09 Apr '08

09 Apr '08

Hi, I was just wondering if there is any chance of having portable binary archives soon again, or to which version of boost I have to revert to use those in the vault. I am just asking as I want to javatize some of my work for another project, and I would like to use boost binary archives for portable serialization (portability of the data is really vital for this project). Best Daniel

4 12

[intrusive] how to change the value of an item in a set?
by Raymond Haeb 09 Apr '08

09 Apr '08

Hello, namespace bi = boost::intrusive; typedef bi::set<relation, bi::constant_time_size<false> > set_type; set_type set; class relation: private boost::noncopyable, public bi::set_base_hook<optimize_size<true> > { public: boost::uuid const &get_uuid() const { return uuid_; } void change_uuid( boost::uuid const& uuid ) { unlink(); uuid_ = uuid; // TODO: reinsert it with the new uuid, // or leave it linked and find a way to tell the set, // that the value has been changed and the tree is // invalid } struct uuid_cmp { bool operator()( boost::uuid const &id, relation const &rel ) const { return id < rel.get_uuid(); } bool operator()( relation const &rel, boost::uuid const &id ) const { return rel.get_uuid() < id; } }; bool operator<( relation const &a ) const { return uuid_ < a.uuid_; } private: boost::uuid uuid_; } So the question is in the comment: Is there a way to change the value of an element of a set or insert an (new) element in a set, without having a pointer to the set? TIA, Raymond

2 1

Egg 2nd request for reviews
by dan marsden 09 Apr '08

09 Apr '08

Hi All The review of the Egg library by Shunsuke Sogame has been running for 1 week now. There has been some discussion of the library on a couple of related threads, but no reviews submitted so far. Please try and find time to submit a review of this library if possible. If you wish to review, but don't have time before the review ends on April 13th, please post to that effect, we may be able to extend / move the review period to help reviewers. Introduction: It is not so easy to define Function Objects especially if you want to support Boost.ResultOf and Boost.Lambda. Therefore, as Boost provides iterator_facade and iterator adaptors, Egg provides function_facade and function adaptors. Egg provides the following features: * Workaround for the Forwarding Problem http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2002/n1385.htm * Helpers to build Function Objects: * egg::function and egg::function_facade provides the way to build Function Objects which supports Boost.ResultOf and Lambda. * Function Objects Adaptors(in other words, higher-order functions): * egg::curryN supports the currying. * egg::pipable emulates extension methods(C#). * egg::fuse/unfuse emulates variadic functions. * egg::nestN represents nested lambda expressions. * etc... The documentation is on line: http://p-stade.sourceforge.net/boost/libs/egg/ The zipped source code is in Vault/FunctionObjects: http://tinyurl.com/34lgda Tested under: Boost Development Trunk and Boost Version1.34.1. --------------------------------------------------- Please always state in your review, whether you think the library should be accepted as a Boost library! Additionally please consider giving feedback on the following general topics: - What is your evaluation of the design? - What is your evaluation of the implementation? - What is your evaluation of the documentation? - What is your evaluation of the potential usefulness of the library? - Did you try to use the library? With what compiler? Did you have any problems? - How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? - Are you knowledgeable about the problem domain? Thanks Dan Marsden Review Manager ___________________________________________________________ Yahoo! For Good helps you make a difference http://uk.promotions.yahoo.com/forgood/

4 4