November 2018 - Boost-users - lists.preview.boost.org

Fwd: Boost::Filesystem - How to iterate, through the whole drive
by Richard Závodný 20 Nov '18

20 Nov '18

---------- Forwarded message --------- From: Richard Závodný <zavodnyrichard(a)gmail.com> Date: Sat, Nov 17, 2018, 3:59 PM Subject: Boost::Filesystem - How to iterate, through the whole drive To: <boost-users(a)lists.boost.org> Hey guys, I need iterate over all directories from starting path. If I start iterating from C:\some-dir it works very well, however if I try to iterate from C:\, it doesn't work. How can iterate through the whole drive? Thank you. Code is here: https://pastebin.com/mpsKJxH2 <https://pastebin.com/3J6FEMG5>. The problem I experience is commented right in the code section (line 1, 13 and 25).

4 7

boost::units - converting from one derived_dimension to another across systems (imperial to metric)
by Matt Vinson 20 Nov '18

20 Nov '18

Eisuke Kawashima: Thank You. I'll have a look. When I saw Boost.Units did not have imperial and we had to create it ourselves, I thought: the US is s 5 trillion dollar market, most of those markets need programming, all are on imperial. Boost.Units needs imperial and programmers would find and use it. Steven Watanabe: Thank You. This solution doesn't seem correct as it does not consider "length".... boost::units::derived_dimension< boost::units::mass_base_dimension, 1, boost::units::time_base_dimension, -2>::typeI thought I'd at it (L M T^-2 L-1) but this didn't do well.: typedef boost::units::derived_dimension< boost::units::length_base_dimension, 1, boost::units::mass_base_dimension, 1, boost::units::time_base_dimension, -2, boost::units::length_base_dimension, -1 >::type lineal_force_dimension; So, I tried the " typedef boost::mpl::divides<...>" solution as it has force and length. I am closer, I hope. *.h------------------------------------------------------------------------------------------------------------------------------------------ namespace dimensional_analysis { typedef boost::units::length_base_dimension::dimension_type length_dimension; typedef boost::units::mass_base_dimension::dimension_type mass_dimension; typedef boost::units::make_system< boost::units::us::inch_base_unit, boost::units::us::pound_base_unit >::type ip_system; namespace lineal_force { typedef boost::mpl::divides< boost::units::force_dimension, boost::units::length_dimension>::type lineal_force_dimension; namespace imperial { typedef boost::units::unit< lineal_force_dimension, dimensional_analysis ::ip_system > lineal_force_unit; typedef boost::units::quantity<lineal_force_unit, double> pound_per_in_quantity; BOOST_UNITS_STATIC_CONSTANT(pound_per_inch, pound_per_in_quantity); } namespace si { typedef boost::units::unit< lineal_force_dimension, boost::units::si::system > lineal_force_unit; typedef boost::units::quantity<lineal_force_dimension, double> kg_per_meter_quantity; BOOST_UNITS_STATIC_CONSTANT(kg_per_meter, kg_per_meter_quantity); } }//lineal_force }//dimensional_analysis *.cpp------------------------------------------------------------------------------------------------------------------------------------------ BOOST_UNITS_DEFINE_CONVERSION_FACTOR(dimensional_analysis::lineal_force::imperial::lineal_force_unit, dimensional_analysis::lineal_force::si::lineal_force_unit, double, 17.858); // exact conversion BOOST_UNITS_DEFAULT_CONVERSION(dimensional_analysis::lineal_force::imperial::lineal_force_unit, dimensional_analysis::lineal_force::si::lineal_force_unit); BOOST_UNITS_DEFINE_CONVERSION_FACTOR(dimensional_analysis::lineal_force::si::lineal_force_unit, dimensional_analysis::lineal_force::imperial::lineal_force_unit, double, 0.0559974); // exact conversion BOOST_UNITS_DEFAULT_CONVERSION(dimensional_analysis::lineal_force::si::lineal_force_unit, dimensional_analysis::lineal_force::imperial::lineal_force_unit); //This is not converting force/length and is converting si -> imperial mass (only) = 110.2. Needs to consider force/length, =50*0.0559974 auto t1 = static_cast<boost::units::quantity<dimensional_analysis::lineal_force::imperial::lineal_force_unit>>( 50.0 * dimensional_analysis::lineal_force::si::lineal_force_unit::unit_type()); / This is not converting force/length and i sconverting imperial -> si mass (only) = 22.7. Needs to consider force/length, =50*17.858 auto t2 = static_cast<boost::units::quantity<dimensional_analysis::lineal_force::si::lineal_force_unit>>( 50.0 * dimensional_analysis::lineal_force::imperial::lineal_force_unit::unit_type()); //This is again only converting mass and needs to convert force/length const auto t3 = boost::units::conversion_factor( dimensional_analysis::lineal_force::imperial::lineal_force_unit::unit_type(), dimensional_analysis::lineal_force::si::lineal_force_unit::unit_type()); On Monday, November 19, 2018, 12:46:57 PM CST, boost-users-request(a)lists.boost.org <boost-users-request(a)lists.boost.org> wrote: Send Boost-users mailing list submissions to boost-users(a)lists.boost.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.boost.org/mailman/listinfo.cgi/boost-users or, via email, send a message with subject or body 'help' to boost-users-request(a)lists.boost.org You can reach the person managing the list at boost-users-owner(a)lists.boost.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Boost-users digest..." Today's Topics: 1. Re: boost::units - converting from one derived_dimension to another across systems (imperial to metric) (Eisuke Kawashima) 2. Re: Fwd: Boost::Filesystem - How to iterate, through the whole drive (Richard Z?vodn?) 3. Re: boost::units - converting from one derived_dimension to another across systems (imperial to metric) (Steven Watanabe) 4. Re: [release] Boost 1.69.0 Beta 1 (Marshall Clow) ---------------------------------------------------------------------- Message: 1 Date: Tue, 20 Nov 2018 02:23:10 +0900 From: Eisuke Kawashima <e.kawaschima+boost(a)gmail.com> To: boost-users(a)lists.boost.org Subject: Re: [Boost-users] boost::units - converting from one derived_dimension to another across systems (imperial to metric) Message-ID: <CAHhxtD6A9Jwhv5amKnTa1bmNkD0U4_LGre8ySKFfQXK7w62oEQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hi list, > I am having trouble converting from one derived_dimension to another across systems (imperial to metric). I'd like to convert, say, lb/in to, say, kg/m. I thought I would do the following but get a compiler error #: > > *.h-------------------------------------------------------------------------------- > namespace dimensional_analysis { > namespace lineal_force { > //lb/in > typedef boost::units::derived_dimension< > boost::units::us::pound_force_base_unit, 1, > boost::units::us::inch_base_unit, -1 > >::type lb_per_inch_dimension; > typedef boost::units::unit< > lb_per_inch_dimension, > dimensional_analysis::lengths::ip_system > > lb_per_inch_unit; > typedef boost::units::quantity<lb_per_inch_unit, double> lb_per_inch_quantity; > BOOST_UNITS_STATIC_CONSTANT(lbpin, lb_per_inch_quantity); > //kg/m > typedef boost::units::derived_dimension< > boost::units::si::kilogram_base_unit, 1, > boost::units::si::meter_base_unit, -1 > >::type kg_per_meter_dimension; > typedef boost::units::unit< > kg_per_meter_dimension, > boost::units::si::system > > kg_per_meter_unit; > typedef boost::units::quantity<kg_per_meter_unit, double> kg_per_meter_unit_quantity; > BOOST_UNITS_STATIC_CONSTANT(kgpm, kg_per_meter_unit_quantity); > }//lineal_force > }//dimensional_analysis > > *.cp ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > //Do I need these? > BOOST_UNITS_DEFINE_CONVERSION_FACTOR(dimensional_analysis::lineal_force::kg_per_meter_unit, dimensional_analysis::lineal_force::lb_per_inch_unit, double, 0.0559974); // exact conversion > BOOST_UNITS_DEFAULT_CONVERSION(dimensional_analysis::lineal_force::kg_per_meter_unit, dimensional_analysis::lineal_force::lb_per_inch_unit); > > //This does not compile# > const auto conv_factor_try0 = conversion_factor(dimensional_analysis::lineal_force::kg_per_meter_unit::unit_type(), dimensional_analysis::lineal_force::lb_per_inch_unit::unit_type()); > > # *\boost_1_68_0\boost\units\detail\conversion_impl.hpp(340): error C2672: 'conversion_factor': no matching overloaded function found (compiling source file...*.cpp) > > Any help is appreciated I opened a PR (https://github.com/boostorg/units/pull/32) to address such a situation; the following code ```cpp #include <iostream> #include <boost/units/base_units/us/inch.hpp> #include <boost/units/base_units/us/pound_force.hpp> #include <boost/units/io.hpp> #include <boost/units/physical_dimensions.hpp> #include <boost/units/systems/si.hpp> int main() { auto force_us{1.0 * boost::units::us::pound_force}; auto length_us{1.0 * boost::units::us::inch}; boost::units::quantity<boost::units::si::force, double> force_si{force_us}; boost::units::quantity<boost::units::si::length, double> length_si{length_us}; std::cout << force_us << " = " << force_si << '\n'; std::cout << length_us << " = " << length_si << '\n'; std::cout << force_us / length_us << " = " << force_si / length_si << '\n'; return 0; } ``` will print ``` 1 lbf = 4.44822 m kg s^-2 1 in = 0.0254 m 1 lbf in^-1 = 175.127 kg s^-2 ``` Best -- Eisuke Kawashima ------------------------------ Message: 2 Date: Mon, 19 Nov 2018 19:24:58 +0100 From: Richard Z?vodn? <zavodnyrichard(a)gmail.com> To: degski <degski(a)gmail.com>, boost-users(a)lists.boost.org Subject: Re: [Boost-users] Fwd: Boost::Filesystem - How to iterate, through the whole drive Message-ID: <d13622b0-9a68-d109-c26e-b60e3a5c45c8(a)gmail.com> Content-Type: text/plain; charset="utf-8"; Format="flowed" I just wanna try it again here, maybe somebody will shop up who knows where is the problem as I unfortunately couldn't fix it with degski (but still, thank you for your time :)). His example (can be found below) doesn't work on my system. The problem is I can't start iteration from the drive root (for example E:\), because it will iterate only the directory above (E:\projects\boost\build) the directory that the executable is located in (the executable is located in E:\projects\boost\build\Debug). What is weird that if I move the executable to the different directory (let's say C:\Users\USER_NAME\Downloads) it will still iterate only the build directory. I tried to play with Visual Studio -> PROJECT_NAME -> Properties -> Debugging -> Working Directory, but without a success. According to degski he has the value of this entry set to $(ProjectDir) which is the same value as mine. Thank you. On 11/18/2018 9:04 AM, degski wrote: > On Sun, 18 Nov 2018 at 05:31, Richard Z?vodn? via Boost-users > <boost-users(a)lists.boost.org <mailto:boost-users@lists.boost.org>> wrote: > > > > ---------- Forwarded message --------- > From: *Richard Z?vodn?* <zavodnyrichard(a)gmail.com > <mailto:zavodnyrichard@gmail.com>> > Date: Sat, Nov 17, 2018, 3:59 PM > Subject: Boost::Filesystem - How to iterate, through the whole drive > To: <boost-users(a)lists.boost.org <mailto:boost-users@lists.boost.org>> > > > Hey guys, I need iterate over all directories from starting path. > If I start iterating from C:\some-dir it works very well, however > if I try to iterate from C:\, it doesn't work. How can iterate > through the whole drive? Thank you. > > > Code is here: https://pastebin.com/mpsKJxH2 > <https://pastebin.com/3J6FEMG5>. The problem I experience is > commented right in the code section (line 1, 13 and 25). > > > This works for me, either with boost-1.68 (not that I think that > matters) or the STL-VC-15.9.1 (/std:c++17): > > #include <iostream> > #include <boost/filesystem.hpp> > > namespace fs = boost::filesystem; > > int main ( ) { > ??? for ( auto & p : fs::recursive_directory_iterator ( "d:\\" ) ) { > ??????? std::cout << p.path ( ) << '\n'; > ??? } > } > > Note that: "The iteration order is unspecified, except that each > directory entry is visited only once." > > degski > -- > /*/*?*/If something cannot go on forever, it will stop" - Herbert Stein*/

4 6

Making an ASIO asynchronous operation from flock()
by Cristian Morales Vega 20 Nov '18

20 Nov '18

So I need to flock (http://man7.org/linux/man-pages/man2/flock.2.html) something (pre-existing flock in other piece of software to interoperate with) and I though: "I think I'm actually starting to understand ASIO, let's make a proper ASIO asynchronous operation with flock". Long story short, I now know better: I will never get ASIO. So my main issues are with the background thread. According to https://www.boost.org/doc/libs/develop/doc/html/boost_asio/overview/core/th… "the threads ... must block all signals". OK, it makes sense, but... - I can make pthread_sigmask() the first thing once the std::thread starts executing. But, I can't really guarantee the thread will never receive a signal, can I? There is a small amount of time between the thread starting to be able to receive signals and pthread_sigmask() doing its job. Modifying the signal mask before the background thread is created (so also from the "not-background" thread) doesn't seem a lot better. - How do I cancel the asynchronous operation? flock() is blocking, not a lot I can do to unblock it. I could send a signal to the background thread, but... they must be blocked, so no. I can't join the thread while it's blocked in flock(). So... should it be detached? I could then maybe just destroy the std::thread, but I still need to call the handler with boost::asio::error::operation_aborted... So, my question: I'm making it more difficult than it is? There is some pattern I should be following which makes all this simple? See what I have below (sorry for the camel case) ------------------------------------------------------------------------------- #include <boost/asio.hpp> #include <boost/beast/core/bind_handler.hpp> #include <boost/system/error_code.hpp> #include <boost/system/system_error.hpp> #include <fcntl.h> #include <iostream> #include <sys/file.h> #include <sys/stat.h> #include <sys/types.h> #include <thread> namespace asio = boost::asio; using error_code = boost::system::error_code; using system_error = boost::system::system_error; class FLockablePosixDescriptor : public asio::posix::descriptor { public: enum class FlockType : int { SHARED = LOCK_SH, EXCLUSIVE = LOCK_EX }; using asio::posix::descriptor::descriptor; FLockablePosixDescriptor(FLockablePosixDescriptor &&) = default; FLockablePosixDescriptor &operator=(FLockablePosixDescriptor &&) = default; ~FLockablePosixDescriptor(); template <typename FLockToken> BOOST_ASIO_INITFN_RESULT_TYPE(FLockToken, void(error_code)) asyncFLock(FlockType type, FLockToken &&token); void cancel(); void cancel(error_code &ec); private: template <typename FLockHandler> void doFLock(int fd, FlockType type, FLockHandler &handler); asio::io_context mBackgroundContext{1}; std::thread mThread; }; FLockablePosixDescriptor::~FLockablePosixDescriptor() { mBackgroundContext.stop(); mThread.join(); } template <typename FLockToken> BOOST_ASIO_INITFN_RESULT_TYPE(FLockToken, void(error_code)) FLockablePosixDescriptor::asyncFLock(FlockType type, FLockToken &&token) { asio::async_completion<FLockToken, void(error_code)> init(token); mBackgroundContext.post([this, fd = native_handle(), type, handler = std::move(init.completion_handler), work = asio::make_work_guard(get_executor())] { doFLock(fd, type, handler); }); mThread = std::thread([this] { mBackgroundContext.run(); }); return init.result.get(); } template <typename FLockHandler> void FLockablePosixDescriptor::doFLock(int fd, FlockType type, FLockHandler &handler) { error_code ec; if (flock(fd, static_cast<int>(type)) == -1) { ec = error_code(errno, boost::system::system_category()); } asio::post(get_executor(), boost::beast::bind_handler(handler, ec)); } void FLockablePosixDescriptor::cancel() { error_code ec; cancel(ec); if (ec) { throw system_error(ec, "cancel"); } } void FLockablePosixDescriptor::cancel(error_code &ec) { // TODO: Cancel flock asio::posix::descriptor::cancel(ec); } int main() { boost::asio::io_context ioc; int fd = open("l", O_RDONLY); FLockablePosixDescriptor desc(ioc, fd); desc.asyncFLock(FLockablePosixDescriptor::FlockType::SHARED, [](const error_code &ec) { std::clog << "Done " << ec << std::endl; }); ioc.run(); } -------------------------------------------------------------------------------

2 2

[release] Boost 1.69.0 Beta 1
by Marshall Clow 19 Nov '18

19 Nov '18

Boost release 1.69.0 beta 1 is now available at: <https://dl.bintray.com/boostorg/beta/1.69.0.beta1/source/> The SHA256 checksums are as follows: ee0ecd7d31f58474c1e0210089c9e66bd878d4d1e7436ac511e359aa4a9d3e86 ./boost_1_69_0_b1.7z 3e25c46f2171799caabbeb419ba7859fffb62208f3a1c80798713377ab07af0e ./boost_1_69_0_b1.tar.bz2 71f4b57175058af1b8c320971cf29226e5a652931a679f7e1c086655147ecafb ./boost_1_69_0_b1.tar.gz ec9ef7d2c9f0d41f560769e67bc7ff207cc999243a7dd6c3f6bcfbdbf0827a7b ./boost_1_69_0_b1.zip For details of what's in the release, see < https://www.boost.org/users/history/version_1_69_0.html>. Please download the beta, give it a try, and report any problems you encounter. Thanks, -- The Boost Release Team

3 4

boost::units - converting from one derived_dimension to another across systems (imperial to metric)
by Matt Vinson 19 Nov '18

19 Nov '18

Thanks for input...Ok, I have errors creating a 'lineal force unit'. In our branch of engineering, we have kips****/ft, kips/in, lbs/foot, lbs/in, kN/meter, Kn/cm, KN/mm, N/meter, N/cm, N/mm, Metric Ton/meter, Metric Ton/cm, Metric Ton/mm, KiloGram/meter $, KiloGram/cm, KiloGram/mm, etc....All these units* are loosing force divided by length. After all the appreciated input in this thread, I thought I'd try this but it does not compile*** probably because force is "L M T^-2" and length is "L" which is not correct: //Lineal Force typedef boost::units::derived_dimension< boost::units::force_dimension, 1, boost::units::length_dimension, -1 >::type lineal_force_dimension; How can I use Boost.Units to convert one force/length to another force/length: say, lb/in to, say, kg/m? *not Boost.Units**, the units in the engineering math equation**A set of base units raised to rational exponents, e.g. m^1, kg^1, m^1/s^2. *** ...\boost_1_68_0\boost\mpl\aux_\preprocessed\plain\less.hpp(20): error C2039: 'value': is not a member of 'boost::units::detail::dimension_list_tag' ****1000 lbs force = kips***** Here is a table in Wiki about converting between lbs and kilogram. Kilogram in Boost.Units is a mass not a force so I need to create a kilogram force and I did that when I converted "Forces" $ in another task... $.h struct metric_ton_base_unit : boost::units::base_unit<metric_ton_base_unit, boost::units::force_dimension, 7> { }; typedef metric_ton_base_unit::unit_type metric_ton_unit; BOOST_UNITS_STATIC_CONSTANT(metric_ton, metric_ton_unit); typedef boost::units::quantity<metric_ton_unit> metric_ton_quantity; // typedef boost::units::make_scaled_unit<metric_ton_unit, boost::units::scale<10, boost::units::static_rational<-3>>>::type kg_force_unit; BOOST_UNITS_STATIC_CONSTANT(kg_force, kg_force_unit); typedef boost::units::quantity<kg_force_unit> kg_quantity;.cpp BOOST_UNITS_DEFINE_CONVERSION_FACTOR(dimensional_analysis::force::metric_ton_base_unit, dimensional_analysis::force::newton_base_unit, double, 9806.65); // exact conversion BOOST_UNITS_DEFAULT_CONVERSION(dimensional_analysis::force::metric_ton_base_unit, dimensional_analysis::force::newton_base_unit);% $ lb/in to kg/m: Google: convert lb/in to kg/m

2 1

boost::units - converting from one derived_dimension to another across systems (imperial to metric)
by Matt Vinson 19 Nov '18

19 Nov '18

I am having trouble converting from one derived_dimension to another across systems (imperial to metric). I'd like to convert, say, lb/in to, say, kg/m. I thought I would do the following but get a compiler error #: *.h-------------------------------------------------------------------------------- namespace dimensional_analysis { namespace lineal_force { //lb/in typedef boost::units::derived_dimension< boost::units::us::pound_force_base_unit, 1, boost::units::us::inch_base_unit, -1 >::type lb_per_inch_dimension; typedef boost::units::unit< lb_per_inch_dimension, dimensional_analysis::lengths::ip_system > lb_per_inch_unit; typedef boost::units::quantity<lb_per_inch_unit, double> lb_per_inch_quantity; BOOST_UNITS_STATIC_CONSTANT(lbpin, lb_per_inch_quantity); //kg/m typedef boost::units::derived_dimension< boost::units::si::kilogram_base_unit, 1, boost::units::si::meter_base_unit, -1 >::type kg_per_meter_dimension; typedef boost::units::unit< kg_per_meter_dimension, boost::units::si::system > kg_per_meter_unit; typedef boost::units::quantity<kg_per_meter_unit, double> kg_per_meter_unit_quantity; BOOST_UNITS_STATIC_CONSTANT(kgpm, kg_per_meter_unit_quantity); }//lineal_force }//dimensional_analysis *.cp ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- //Do I need these? BOOST_UNITS_DEFINE_CONVERSION_FACTOR(dimensional_analysis::lineal_force::kg_per_meter_unit, dimensional_analysis::lineal_force::lb_per_inch_unit, double, 0.0559974); // exact conversion BOOST_UNITS_DEFAULT_CONVERSION(dimensional_analysis::lineal_force::kg_per_meter_unit, dimensional_analysis::lineal_force::lb_per_inch_unit); //This does not compile# const auto conv_factor_try0 = conversion_factor(dimensional_analysis::lineal_force::kg_per_meter_unit::unit_type(), dimensional_analysis::lineal_force::lb_per_inch_unit::unit_type()); # *\boost_1_68_0\boost\units\detail\conversion_impl.hpp(340): error C2672: 'conversion_factor': no matching overloaded function found (compiling source file...*.cpp) Any help is appreciated

8 8

Bad link in https://www.boost.org/community/groups.html page
by Dan Field 19 Nov '18

19 Nov '18

The https://www.boost.org/community/groups.html page discusses various boost mailing lists. In the section discussing the Users mailing list, there's a link to browse Gmain's searchable archive. This link is dead.

1 0

Broken link in Getting Started Page
by David Demelier 19 Nov '18

19 Nov '18

Hello, The link: (an up-to-date list is always available in the Boost.Build documentation). In the getting started page is broken and ends in 404. https://www.boost.org/doc/libs/1_68_0/more/getting_started/windows.html Regards,

1 0

[Variant] Bug assigning similar, but different concrete types during assignment / ctor relay
by Michael Powell 18 Nov '18

18 Nov '18

Hello, I've got a Boost.Variant confusion going on during ctor relay. I have two types participating in the Variant, an Integer type and a Floating Point type. Both are Numeric as a base class. i.e. something like: template<typename T> struct numeric {}; struct integer : numeric<long> {}; struct floating_point : numeric<double> {}; Then: using constant_value = boost::variant<..., floating_point, integer, ...>; Somewhere during the handling, I have a test case in which I have a constant_value{} starting out in life as an integer{}. However, somewhere during handling, variant is misinterpreting integer (which=3) as a floating_point (which=2). This is incorrect, of course. I could force the issue, I suppose and re-set the value to the integer, but I'd like to understand the issue. I think it's a bug in variant, or perhaps a "feature" confusing integer with floating_point along base class numeric lines? Any ideas

2 5

[release] Boost 1.69.0 Beta 1 Release Candidate 3
by Marshall Clow 17 Nov '18

17 Nov '18

[ Ok, I've rebuilt the RC - and it contains only the changes to function and MPL ] The release candidates for the third 1.69.0 beta release are now available at: <https://dl.bintray.com/boostorg/beta/1.69.0.beta1.rc3/source/> The release notes are not yet final. The SHA256 checksums are as follows: ee0ecd7d31f58474c1e0210089c9e66bd878d4d1e7436ac511e359aa4a9d3e86 ./boost_1_69_0_b1_rc3.7z 3e25c46f2171799caabbeb419ba7859fffb62208f3a1c80798713377ab07af0e ./boost_1_69_0_b1_rc3.tar.bz2 71f4b57175058af1b8c320971cf29226e5a652931a679f7e1c086655147ecafb ./boost_1_69_0_b1_rc3.tar.gz ec9ef7d2c9f0d41f560769e67bc7ff207cc999243a7dd6c3f6bcfbdbf0827a7b ./boost_1_69_0_b1_rc3.zip As always, the release managers would appreciate it if you download the candidate of your choice and give building it a try. Please report both success and failure, and anything else that is noteworthy. -- The Boost Release Managers

2 2

Re: [Boost-users] [boost] [release] Boost 1.69.0 Beta 1 Release Candidate 2
by Marshall Clow 16 Nov '18

16 Nov '18

On Thu, Nov 15, 2018 at 11:37 AM Robert Ramey via Boost < boost(a)lists.boost.org> wrote: > On 11/14/18 2:50 PM, Marshall Clow via Boost wrote: > > Marshall, > > I would like to merge development of the serialization library into the > master if there is an opportunity to do so. If not, I'll just wait > until after the release. > After the beta release, sure. > I know you've complained about merging w/o permission. I'm not a git > guru but can't you tag the current state and work with that > independently of what anyone subsequently merges. Also there's creating > a branch for the merge. Also the possibility of keeping the release > candidate on your own machine and only pulling what you want to > explictly merge. Just food for thought? > Or you can merge to release locally and not push those changes until later. -- Marshall

2 1

process group object creation fail with version-1.67, 1.68
by dinesh kumar 16 Nov '18

16 Nov '18

Hi Team, I would like to take this to your notice, as the boost process group object creation is failing, in windows with ${SUBJECT} versions. I've tried 1.66, 1.69-b1-canadiate2 both are working fine. #include <boost/process.hpp> #include <iostream> int main() { try { boost::process::group grp; } catch (std::exception &e) { std::cout << e.what(); } return 0; } *Output* SetInformationJobObject() failed: The handle is invalid. Visual studio version is: 15.8.5 -- Regards, Dinesh manojadinesh.blogspot.com

1 0

[release] Boost 1.69.0 Beta 1 Release Candidate 2
by Marshall Clow 16 Nov '18

16 Nov '18

The release candidates for the second 1.69.0 beta release are now available at: <https://dl.bintray.com/boostorg/beta/1.69.0.beta1.rc2/source/> The release notes are not yet final. The SHA256 checksums are as follows: 77827b25121159a4e65cfbdf19713e2d589fce267fd6f08615a453d24753c9d3 ./boost_1_69_0_b1_rc2.7z ea05c6e01c856369afdab1f6c075e06fb0f965ab1c247f753ed5c951a9db4e71 ./boost_1_69_0_b1_rc2.tar.bz2 b393a73cf084be716c40ef346cfacb1c95e7b14637e8385eeeb50774dd0b99ed ./boost_1_69_0_b1_rc2.tar.gz 74c0c0a19a700fee2b4f434bb7df50840642e3c35924e85864b278bd519af062 ./boost_1_69_0_b1_rc2.zip As always, the release managers would appreciate it if you download the candidate of your choice and give building it a try. Please report both success and failure, and anything else that is noteworthy. -- The Boost Release Managers

2 5

[Optional] Lazy initialized optional
by Michael Powell 14 Nov '18

14 Nov '18

Hello, I am looking into deriving from boost::optional and adding lazy initialization capability. I can arrange a constructor, or whatever, to inject an appropriate factory method, functional callback, etc, that's no problem. >From the boost::optional perspective, I'd like to override a key method (or methods, hopefully not too many) in order to inject that factory provided value. I'm thinking optional::get? Unless there's a better override for that? Cheers, Michael Powell

3 3

[release] Boost 1.69.0 Beta 1 Release Candidate 1
by Marshall Clow 14 Nov '18

14 Nov '18

The release candidates for the first 1.69.0 beta release are now available at: <https://dl.bintray.com/boostorg/beta/1.69.0.beta.1.rc1/source/> The release notes are not yet available. The updated documentation is not yet available. [ They will be available in a day or two. ] The SHA256 checksums are as follows: db6b346389714647490d6503db881e4178dd8cd498f850999bebf72cacd4c4ed boost_1_69_0_b1_rc1.7z d128c82351becbd37a02b9b4818994d3f66ff8bdbc0a18838206f4c070db97af boost_1_69_0_b1_rc1.tar.bz2 4df6262db53cfd0d0f934cb126f7e48e94872fe4441cbac6bf72a43bfb136a45 boost_1_69_0_b1_rc1.tar.gz e2908e33cc15f92cda06ddde6a3da43b18967a83105355571fc3cf6e75820c7f boost_1_69_0_b1_rc1.zip As always, the release managers would appreciate it if you download the candidate of your choice and give building it a try. Please report both success and failure, and anything else that is noteworthy. -- The Boost Release Managers

7 16

Trouble building boost
by Vipin Verma 13 Nov '18

13 Nov '18

Hello I have tried building boost on my Windows as well as Ubuntu system, but I am not able to make it work. Could you please help me? Here is a post with details about Windows - https://stackoverflow.com/questions/53273860/opennero-windows-could-not-fin… Here is a post about Ubuntu - https://stackoverflow.com/questions/53151130/opennero-ubuntu-process-finish… -- Regards Vipin Verma <https://www.linkedin.com/in/vipin8169> BlueSapling Technologies Pvt Ltd. <https://bluesapling.com/> +1-480-410-1673

1 0

[Variant] Minimum implementation to be variant friendly
by Michael Powell 13 Nov '18

13 Nov '18

Hello, What's the minimum implementation a struct needs to fulfill in order to be boost::variant friendly? Things like, does it need to support perfect forwarding? An assignment operator? And so on. Thanks! Michael Powell

3 4

[Spirit] Qi int_parser rejecting a negative signed std::intmax_t
by Michael Powell 12 Nov '18

12 Nov '18

Hello, qi::int_parser works fine for a positive signed hex radix integer, but is failing for a negative signed hex radix integer. My integer type is std::intmax_t, which on this platform I think is long long. Is there an integer width constraint? And/or a signage problem? Do I need to enable BOOST_HAS_LONG_LONG? Or is that enabled by default? Cheers, thanks! Michael Powell

2 7

Boost 1.68.0 contains only python 3.7 library, no python 2.7 library?
by Heng Zhou 10 Nov '18

10 Nov '18

Hi, I installed Boost 1.68.0 recently from Windows x64 pre-compiled binary "boost_1_68_0-msvc-14.0-64.exe" downloaded from https://urldefense.proofpoint.com/v2/url?u=https-3A__sourceforge.net_projec…. Then, I noticed that this version of Boost contains only python 3.7 library because the filenames under C:\local\boost_1_68_0\lib64-msvc-14.0 are only boost_python37-vc140-mt-.... This caused errors from building a third-party library which tries to link Boost python 2.7 library (i.e., tries to find file boost_python27-vc140-mt-...) . So what is matter? Does Boost decide to stop supporting python 2.7 since version 1.68.0, or is Boost python 2.7 library located somewhere else using some hard-to-recognize filename? I'm using Windows 10, VS2015 and have only python 2.7 installed. Thank you for your help with this issue.

2 1

[Format] Possible to format numeric values using radix?
by Michael Powell 09 Nov '18

09 Nov '18

Hello, For instance, given a numerical value, I'd like to specify the Radix, whether to format octal or hex. Thanks in advance! Best regards, Michael Powell

1 1

[DLL] BOOST_DLL_ALIAS not working on MinGW-w64
by David Demelier 09 Nov '18

09 Nov '18

Hello, I'm using boost 1.68 on MinGW-w64 (Windows 10). I'm trying a simple plugin that works fine under Linux and FreeBSD However, on Windows boost::dll::import_alias triggers an exception: terminate called after throwing an instance of 'boost::exception_detail::clone_impl<boost::exception_detail::error_info_injector<boost::system::system_error> >' what(): boost::dll::shared_library::get() failed: The specified procedure could not be found This is the plugin (plugin.cpp) #include <iostream> #include <boost/dll.hpp> namespace custom { void my_function() { puts("CALLED"); } } // !custom BOOST_DLL_ALIAS(custom::my_function, my_function) I compile using: g++ -std=c++17 -shared -o plugin.dll plugin.cpp -lboost_system-mt And the simple main.cpp file: #include <boost/dll.hpp> int main() { using my_function = void (); auto f = boost::dll::import_alias<my_function>("./plugin.dll", "my_function"); } What's strange, nm does not report any kind of unmangled symbols related to "my_function": $ nm plugin.dll | grep my_function 0000000067e81422 t _GLOBAL__sub_I__ZN6custom11my_functionEv 0000000067e813b0 T _ZN6custom11my_functionEv It should contains something starting with boostdll_ isn't it? What's happening there? Do I miss something? -- David

1 0

[Spirit] Qi lexeme only taking the first word
by Michael Powell 08 Nov '18

08 Nov '18

Hello, I've got a couple of rules that are perplexing to me. First, rule<It, std::string(), St> id %= lexeme[qi::alpha >> *char_("A-Za-z0-9_")]; In and of itself, id is working fine. Then I've got a "full id": rule<It, full_id_t(), St> full_id %= id >> *(char_('.') >> id); Where: struct full_id_t { std::string val; }; full_id_t::val is quite intentional for reasons elsewhere in the grammar. The perplexity comes in, it seems lexeme is only shaving off the first word as the val. For instance, parsing "two.oranges.red.test", I receive back "two" in the AST. Perhaps I should defer specifying the lexeme part of id until later? Thoughts? Suggestions? Thank you! Best regards, Michael Powell

4 12

Build/use Boost without ICU
by braden 08 Nov '18

08 Nov '18

How does one build (and use) Boost without ICU when ICU is installed (i.e., visible to b2)? I am am bootstrapping with: ...which shows: Seems reasonable so far. Building happens with: ...which shows: In spite of passing "--disable-icu -sboost.locale.icu=off" to b2, I still see Boost.Locale getting built with -DBOOST_LOCALE_WITH_ICU=1; e.g.: What's the correct way to do this? ----- Braden McDaniel braden(a)endoframe.com -- Sent from: http://boost.2283326.n4.nabble.com/Boost-Users-f2553780.html

3 3

Newby help with Boost::Log
by Davies, John 08 Nov '18

08 Nov '18

I'm using Boost Log to capture all keypresses in my embedded device. I want to be able to store at most 3 files of a certain size and rotate them. That's working. My problem is a scenario like this: The device is inserting data into Log_009.log which is in the base folder. In the log folder are Log_006.log, Log_007.log, and Log_008.log. The program stops and restarts. This may be due to some keypress that was logged in Log_009.log. When it restarts, it clears out Log_009.log and starts it over - losing the last logged keypresses Ideally, I'd like Boost Log to just keep appending to Log_009.log, but my reading online says that this isn't possible. My second favorite solution would be that Log_009 gets rotated and Log_010.log is started. Anything so I don't lose data. Here is my configuration: logging::add_common_attributes(); logging::add_file_log ( keywords::file_name = "KeyLog_%3N.log", keywords::target = "./Logs", keywords::rotation_size = 500, // 10 * 1024 * 1024, keywords::format = "[%TimeStamp%]: %Message%", keywords::auto_flush = true, keywords::min_free_space = 30 * 1024 * 1024, boost::log::keywords::max_size = 20 * 1024, keywords::enable_final_rotation = true, keywords::scan_method = sinks::file::scan_matching, keywords::max_files = 3 ); Can you see what I'm missing? If a program exits via a crash, does final rotation occur? Maybe I need something like enable_initial_rotation. Thanks for the help, John ________________________________ The information contained in this message may be confidential and legally protected under applicable law. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, forwarding, dissemination, or reproduction of this message is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message.

1 0

Deadline for 1.69.0 beta extended
by Marshall Clow 07 Nov '18

07 Nov '18

The deadline for closing the master branch for the 1.69.0 beta has been extended until Friday, November 9th. The final release date has not been changed. -- Marshall (who is at a WG21 meeting all week)

1 0