August 2011 - Boost-users - lists.preview.boost.org

Serialization: how to port binary archives containing NAN created with version 1.43 to version 1.47?
by Robert Lupton the Good 21 Aug '11

21 Aug '11

>> Because of a user request we support serialization of nan and inf. >> The official boost archives don't, as you already found out. > Robert Ramey wrote: > I just looked at the page. It looks very interesting to me. When > I have some time, I will be investigating which of these might > be included in the boost distribution of the serialization library. Does this mean that you plan to support IEEE special values (e.g. NaN, Inf) in boost, or some other part of Christian's work? There's traffic on the IEEE limitation (feature?) in boost::serialize dating back to at least 2005 --- some with your name on it! R

2 1

[iostreams] encryption filters
by Sean Farrow 21 Aug '11

21 Aug '11

Hi: Has anybody written encryption filters for the IOStreams library using crypto++? I need to do this but didn't want to duplicate effort if any existed already. Cheers Sean.

1 0

[Serialization] Prevent member serialization in a non intrusive situation
by Sean Farrow 21 Aug '11

21 Aug '11

Hi: I am using boost.serialization, and need to prevent members (boost.thread, and Booleans) being serialized. Given that I am using non-intrusive serializing code, what is the best way of doing this. Any help appreciated. Cheers Sean.

1 0

boost 1.47.0 failed to be built under MinGW...
by JIA Pei 21 Aug '11

21 Aug '11

Hi, all: Happened to notice that boost 1.47.0 is out, therefore, I just downloaded boost_1_47_0.zip and would like to try it out . However, I wanna try to use MinGW to build boost this time. 1) I strictly followed http://www.boost.org/doc/libs/1_47_0/more/getting_started/windows.html 2) Also, I referred to http://cboard.cprogramming.com/windows-programming/126599-how-set-boost-up-… However I always obtain the following errors: > Failed to bootstrap the build engine Consult 'bootstrap.log' for more details In bootstrap.log, I had the following error messages: > builtins.c:32:23: fatal error: sys/wait.h: No such file or directory > compilation terminated. > execunix.c:17:26: fatal error: sys/resource.h: No such file or directory > compilation terminated. > fileunix.c:98:17: fatal error: ar.h: No such file or directory > compilation terminated. The reason seems to be in the current installed MinGW (the newest version), there seems to be no sys/wait.h sys/resource.h ar.h What's more, from http://patchwork.ozlabs.org/patch/74260/ it's suggested that "Don't use sys/wait.h for mingw targets" . It could be this reason that sys/wait.h is not included in current MinGW installation, which actually influence the current boost 1.47.0's bootstrap !!! Can anybody give me a hand on this? Cheers Pei -- Pei JIA Email: jp4work(a)gmail.com cell: +1 604-362-5816 Welcome to Vision Open http://www.visionopen.com

1 0

Boost Graph Very Strange Behavior
by Alexander Feldman 21 Aug '11

21 Aug '11

Dear All, I have upgraded to Boost 1.47.0 and I have spent a day on the following strange behavior that someone who knows Boost better may explain to me. Consider the source below. If I uncomment the line: //cout << ""; in line 39, then the program starts working, i.e., it outputs: 0x1 If I comment out line 39, then I get 0 There are no memory leaks. This kind of stuff gives me nightmares. Thanks for your help and sorry for the longish example. Thanks, -- Alex ----------------------------------------------------------------------- #include <boost/graph/adjacency_list.hpp> #include <iostream> using namespace boost; using namespace std; typedef adjacency_list<listS, listS, undirectedS, property<vertex_name_t, void *>, property<edge_name_t, void *> > GraphT; class Graph : public GraphT { public: Graph(); public: typedef graph_traits<GraphT>::vertex_descriptor VertexType; typedef graph_traits<GraphT>::edge_descriptor EdgeType; public: ostream &put(ostream &) const; void setNetLabel(const EdgeType &, void *); void addNet(const VertexType &, const VertexType &, void *); private: property_map<GraphT, edge_name_t>::type net_; }; Graph::Graph() { net_ = get(edge_name, *this); } void Graph::setNetLabel(const EdgeType &edge, void *label) { //cout << ""; net_[edge] = label; } void Graph::addNet(const VertexType &branch1, const VertexType &branch2, void *label) { EdgeType ei; bool inserted; tie(ei, inserted) = add_edge(branch1, branch2, *this); if (inserted) { setNetLabel(ei, label); } } ostream &Graph::put(ostream &out) const { graph_traits<GraphT>::edge_iterator ei, ei_end; for (tie(ei, ei_end) = edges(*this); ei != ei_end; ei++) { out << net_[*ei] << endl; } return out; } int main(int argc, char **argv) { Graph graph; Graph::VertexType v1 = add_vertex(graph); Graph::VertexType v2 = add_vertex(graph); graph.addNet(v1, v2, (void *)1); graph.put(cout); return EXIT_SUCCESS; } -----------------------------------------------------------------------

2 2

[serialization] : compile problem
by Kaz 20 Aug '11

20 Aug '11

Hi All, I am trying to compile this code to test boost serialization, however I am getting this error Error 5 error C2664: 'boost::mpl::assertion_failed' : cannot convert parameter 1 from 'boost::mpl::failed ************boost::serialization::is_wrapper<T>::* ***********' to 'boost::mpl::assert<false>::type' c:\program files (x86)\boost\boost_1_46_1\boost\archive\basic_xml_oarchive.hpp 92 I am using boost 1.46.1, visual studio c++ 2010 express. Any help will be appreciated. Thanks, Kaz //----------------------------------------------------------------------------------------------------------- #include <string> #include <boost/serialization/vector.hpp> #include <boost/serialization/list.hpp> #include <boost/archive/xml_iarchive.hpp> #include <boost/archive/xml_oarchive.hpp> #include <boost/archive/tmpdir.hpp> #include <fstream> class Base { friend class boost::serialization::access; template<typename archive> void serialize( archive& ar, const unsigned int version ) { ar & BOOST_SERIALIZATION_NVP(a) & BOOST_SERIALIZATION_NVP(c) & BOOST_SERIALIZATION_NVP (strBase); } public: Base( int a_arg, char c_arg ) : a( a_arg ), c ( c_arg ) { strBase = "This is base"; } int a; char c; std::string strBase; }; //------------------------------------- BOOST_SERIALIZATION_ASSUME_ABSTRACT(Base) //------------------------------------- class Child : public Base { friend class boost::serialization::access; template<typename archive> void serialize( archive& ar, const unsigned int version ) { ar & boost::serialization::base_object<Base>(*this); ar & BOOST_SERIALIZATION_NVP(f) & BOOST_SERIALIZATION_NVP(strChildName); } public: Child() : Base(0,'c'), f(3.3417) { strChildName = "This is Child"; } float f; std::string strChildName; }; //------------------------------------- class BaseContainer { typedef Base* BasePtr; std::vector<BasePtr> BaseVec; friend class boost::serialization::access; template<typename archive> void serialize( archive& ar, const unsigned int version ) { ar.register_type<Base>(); ar.register_type<Child>() ; ar & BaseVec; } public: BaseContainer() {} void Init() { for(int i = 0; i < 10; ++i ) { if ( i < 5 ) BaseVec.push_back( new Base(i,'b') ); else BaseVec.push_back( new Child() ); } } }; //------------------------------------- int main() { std::string filename="demo.xml"; BaseContainer baseContainer; baseContainer.Init(); { std::ofstream ofile(filename); boost::archive::xml_oarchive out(ofile); out << BOOST_SERIALIZATION_NVP(baseContainer); } return 0; } //-------------------------------------

2 2

Re: [Boost-users] Boost asio deadline_timer, bug?
by Marat Abrarov 20 Aug '11

20 Aug '11

Hi, Allan. > Is this a bug, or am I doing something wrong? Note that deadline_timer always (!) invokes wait handler, even it was successfully cancelled (int res = timer1.cancel(); assert(res > 0);): http://www.boost.org/doc/libs/1_47_0/doc/html/boost_asio/reference/basic_de… ~~~ The handler for each cancelled operation will be invoked with the boost::asio::error::operation_aborted error code. ~~~ Regards, Marat Abrarov.

2 1

[review] Conversion review starts today
by Gordon Woodhull 20 Aug '11

20 Aug '11

Hi All, The review of Vicente Botet Escriba's Conversion library starts today and ends August 29. The Conversion library manages generic explicit conversion between unrelated types. It can be thought of as a substitute for overloading static_cast, or as an alternative to lexical_cast when conversion via text is unwanted. The code is available here: http://svn.boost.org/svn/boost/sandbox/conversion/ And the documentation is here: http://svn.boost.org/svn/boost/sandbox/conversion/libs/conversion_ext/doc/h… Alternately, you can download a compressed package here: https://github.com/viboes/TBoost.Conversion Reviews may answer the following questions: * What is your evaluation of the design? * What is your evaluation of the implementation? * What is your evaluation of the documentation? * What is your evaluation of the potential usefulness of the library? * Did you try to use the library? With what compiler? Did you have any problems? * How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? * Are you knowledgeable about the problem domain? And finally, every review should answer this question: * Do you think the library should be accepted as a Boost library? Be sure to say this explicitly so that your other comments don't obscure your overall opinion. Of course, "informal reviews" and discussion are also welcome. Cheers, Gordon Woodhull Espen Harlinn

1 0

[boost] [review] Conversion review starts today
by Gordon Woodhull 20 Aug '11

20 Aug '11

Hi All, The review of Vicente Botet Escriba's Conversion library starts today and ends August 29. The Conversion library manages generic explicit conversion between unrelated types. It can be thought of as a substitute for overloading static_cast, or as an alternative to lexical_cast when conversion via text is unwanted. The code is available here: http://svn.boost.org/svn/boost/sandbox/conversion/ And the documentation is here: http://svn.boost.org/svn/boost/sandbox/conversion/libs/conversion_ext/doc/h… Alternately, you can download a compressed package here: https://github.com/viboes/TBoost.Conversion Reviews may answer the following questions: * What is your evaluation of the design? * What is your evaluation of the implementation? * What is your evaluation of the documentation? * What is your evaluation of the potential usefulness of the library? * Did you try to use the library? With what compiler? Did you have any problems? * How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? * Are you knowledgeable about the problem domain? And finally, every review should answer this question: * Do you think the library should be accepted as a Boost library? Be sure to say this explicitly so that your other comments don't obscure your overall opinion. Of course, "informal reviews" and discussion are also welcome. Cheers, Gordon Woodhull Espen Harlinn _______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost

1 0

Re: [Boost-users] [Containers Library Review] The review of the Containers library by Ion Gaztanaga starts today
by Ion Gaztañaga 20 Aug '11

20 Aug '11

El 17/08/2011 5:12, Edward Diener escribió: > I think the documentation is good, but it is hard to find overviews of > the separate containers. They are buried in the reference whereas I > would like to see them as separate topics in the TOC. It seems that documentation is the main issue of the review, I hope tools like autoindex will help me improve this and still maintain automatic reference documentation. > For the example in the "Emplace: Placement insertion" topic there is a > 'non_copy_movable ncm;' in the main function but it is never used, which > is confusing. I did get the idea of emplacement from the example and > understand what it is. Thanks for spotting this. > There is mention in the Introduction that "Containers support stateful > allocators" but that appears to be all that is written about that topic. > I would like to know what that is about. Ok, this has been already requested, I'll fix it. > The "Recursive Containers" topic gives a nice example but does not > explain what a recursive container entails and why a recursive container > is not guaranteed by the standard. Some further information should be > given in this topic. Ok > For all of the containers which have the same names as the std:: > containers, it should be pointed out what their benefits are. if it is a > matter of all those containers having move semantics, placement > insertion, recursive containers, and stateful allocators, that should be > mentioned. One would like to know why one should use the Containers > library containers rather than the std:: containers without having to > read the description of each container. Ok Best, Ion

3 6

boost::thread or openMP for low-latency multi-threading
by Jack Bryan 19 Aug '11

19 Aug '11

Hi, I am trying to do parallelization for a computing intensive problem. I am working on a Linux cluster where each node is a multicore processor. e.g. 2 or 4 quad-core processor per node. I want to reduce latency and improve performance as much as possible. I plan to use multiprocessing and multithreading at the same. Each process run on a distinct node and each process spawn many threads on each node. This is a 2 level parallelism. For multiprocessing, I would like to choose MPI. For multithreading, I have two choices: openMP or boost::thread (pthread). Which one has lower latency and higher performance ? It seems that openMP coding is easier (without touching low level thread managing manually). But, it seems that openMP has higher overhead than boost::thread (pthread). Any help is really appreciated. thanks

1 0

Scoped Pairs of functions?
by Brian Allison 19 Aug '11

19 Aug '11

Hi all, I'm on a project which uses a C++ compiler, but with a lot of C-isms. One of those is that there are objects with pairs of functions which allocate/deallocate resources. I don't have time to fix all of the design issues with the classes that do this (yet), but within one compilation unit I'd like to remove the chance for leaks. So - if I wanted to use boost types to wrap around 2 functions f() and g(), where each function - has a void or primitive return type - takes zero or 1 argument - where f() is called at some point in a scope, and then g() is called *on exiting the scope *from which f() is called and only if f() doesn't throw.. - has its return value ignored. [Gahh....] Is there a boost::bind (or lambda) expression that I can wrap in a type? I'm not adverse to using several template parameters. If it were just nullary functions I could just use: struct Reference {}; struct TypeWrapper{}; // Signify something like shared_ptr, a T which wraps around a pointer to an object of the type containing the functions, where T has a typedef value_type to refer to the wrapped type, and a get() to obtain a pointer to the wrapped pointer. template<class T, type R1, type R2, class P = Reference> struct ScopedDuals { typedef R1 (T::*f_t)(); typedef R2 (T::*g_t)(); ScopedDuals(T&t, f_t f, g_t g) : t_(t), g_(g) { (t_.f)(); } ~ScopedDuals() { (t_.*g_)(); } private: T& t_; g_t g_; }; template<class T, type R1. type R2> struct ScopedDuals<T, R1, R2, TypeWrapper> { typedef typname T::value_type Inner_t; typedef R1 (Inner_t::*f_t)(); typedef R2 (Inner_t::*g_t)(); ScopedDuals(T&t, f_t f, g_t g) : t_(t), g_(g) { (t_.get()->*f)(); } ~ScopedDuals() { (t_.get()->*g_)(); } private: T& t_; g_t g_; }; How do I generalize to include the possibility of a single argument? and.... does anyone have a better suggestion for a name than "ScopedDuals"? While *I *think it's precise, it may not be useful to my teammates. thanks, Brian

2 3

dynamically linked libraries looking for static libraries which don't exist
by Pally Sandher 19 Aug '11

19 Aug '11

I've built debug binaries of boost 1.47.0 on Windows with MSVC 10 using the following options b2.exe variant=debug link=shared threading=multi runtime-link=shared which as far as I understand should build dynamically linked libraries (which it does, I get a bunch of .lib files & .dll files as expected). However when I try to link some projects in Visual Studio 2010 which import boost_filesystem-vc100-mt-gd-1_47.lib & boost_system-vc100-mt-gd-1_47.lib I get the following errors 1>LINK : fatal error LNK1104: cannot open file 'libboost_filesystem-vc100-mt-gd-1_47.lib' & 1>LINK : fatal error LNK1104: cannot open file 'libboost_system-vc100-mt-gd-1_47.lib' I can stop these errors by using the /NODEFAULTLIB option on both those libraries but I would like to stop them in the first instance. Does anyone have any ideas why the libraries which should be dynamically linked are looking for statically linked libraries which don't exist? Palbinder Sandher Software Deployment Engineer T: +44 (0) 141 945 8500 F: +44 (0) 141 945 8501 http://www.iesve.com **Design, Simulate + Innovate with the <Virtual Environment>** Integrated Environmental Solutions Limited. Registered in Scotland No. SC151456 Registered Office - Helix Building, West Of Scotland Science Park, Glasgow G20 0SP Email Disclaimer

3 3

Starting...
by Giordano Bruno 18 Aug '11

18 Aug '11

Hi people, I want to use boost_pp in my embedded systems development using avr-gcc (C language). I was trying to understand how boostpp works, but it looks fuzzy to me. Can you explain me what is this "0" in the line 40 from preprocessor/comparison/less.hpp: define BOOST_PP_LESS_D(d, x, y) BOOST_PP_IIF(BOOST_PP_NOT_EQUAL(x, y), BOOST_PP_LESS_EQUAL_D, 0 BOOST_PP_TUPLE_EAT_3)(d, x, y) http://www.boost.org/doc/libs/1_43_0/boost/preprocessor/comparison/less.hpp thanks Giordano >

2 1

Re: [Boost-users] : dynamically linked libraries looking for static
by Alex Perry 18 Aug '11

18 Aug '11

Pally Sandher <pally.sandher(a)iesve.com> wrote on Thu, 18 Aug 2011 15:49:07 +0000 > > I've built debug binaries of boost 1.47.0 on Windows with MSVC 10 using the > following options > snip > I can stop these errors by using the /NODEFAULTLIB option on both those > libraries but I would like to stop them in the first instance. Does anyone have > any ideas why the libraries which should be dynamically linked are looking for > statically linked libraries which don't exist? Are you using the appropriate #define in your consuming code Eg #ifndef BOOST_REGEX_DYN_LINK #define BOOST_REGEX_DYN_LINK #endif #include <boost/regex.hpp> Which would ask to link to the dynamic link version of regex library not the static one - then all you need to do is make sure that the path to the boost libraries directory is added rather than having to add specific libraries Similar defines exist for the other libraries which are not header only. HTH Alex

1 0

Why is asio clobbering my file before it can be sent?
by Andrew Yancy 18 Aug '11

18 Aug '11

I've used the same boilerplate boost::asio code for years to send a plain text file "foo.txt" from a server back to a client and it has always worked fine. Suddenly for no apparent reason, the same code I've always used with no problems now deletes the contents of foo.txt before it can actually be sent to the client. I'm creating foo.txt with a different program now, but I don't see how that could make any difference on Win32. Below is the relevant part of the code just before I use boost::asio::write to send the contents of foo.txt back to the client. As shown by the two printf statements, the contents of the file are somehow lost when the file name and size are sent to the client. Anyone know what's going on? Is there any other information I can provide to shed light on the problem? Thanks very much for any help~ std::ifstream source_file("foo.txt", std::ios_base::binary | std::ios_base::ate); if (!source_file) return __LINE__; size_t file_size = source_file.tellg(); source_file.seekg(0); printf("foo.txt size: %d\n", (int) file_size); //size is OK here boost::asio::streambuf request; std::ostream request_stream(&request); request_stream << return_fn << "\n" << file_size << "\n\n"; boost::asio::write(socket, request); file_size = source_file.tellg(); printf("foo.txt size: %d\n", (int) file_size); //size is now 0!

3 4

[IOStreams] Is such a behaviour considered as bug
by Ovanes Markarian 17 Aug '11

17 Aug '11

Hello *, I really enjoyed working with Iostreams, while testing some of my components. Using IOStreams with array_device seemed to be a very powerfull approach to test some of my stream based algorithms. But currently I face some issues which seem to be really weired to me. I produced some code snippet to better explain it. I used Boost.Test library to verify my assumptions. using namespace boost; namespace io=boost::iostreams; typedef unsinged char byte; typedef array<byte, 2> arr_buffer; //boost::array typedef io::basic_array<byte> arr_dev; arr_buffer buffer_ = {{}}; arr_dev dev_(buffer_.begin(), buffer_.end()); io::stream<arr_dev> ios_(dev_); arr_dev::pair_type range = dev_.input_sequence(); BOOST_MESSAGE("size: " << distance(range.first, range.second)); // output: size is 2 BOOST_CHECK_EQUAL(0u, ios_.tellg()); //stream is at position 0 as expected ios_.seekg(1); BOOST_CHECK_EQUAL(1u, ios_.tellg()); // stream is at position 1 as expected ios_.seekg(2); BOOST_MESSAGE("current pos: " << ios_.tellg()); // !!! stream is at position 2 ios_.seekg(3); BOOST_MESSAGE("current pos: " << ios_.tellg()); // stream is at position -1 BOOST_MESSAGE("eof: " << ios_.eof()); // !!! but eof is false If the defined stream is only 2 bytes long why is 2 a valid stream position? Why is eof always false? Do you think this behavior is buggy? I changed the same behavior to read bytes from stream and created an array of length 3, but passed the range of 2 bytes to the device ctor. This works as expected: arr_buffer buffer_ = {{'a', 'b', 'c'}}; arr_dev dev_(buffer_.begin(), buffer_.begin()+2); //range of 2 bytes is passed io::stream<arr_dev> ios_(dev_); arr_dev::pair_type range = dev_.input_sequence(); BOOST_MESSAGE("size: " << distance(range.first, range.second)); byte bt; BOOST_MESSAGE("current pos: " << ios_.tellg()); // prints 0 BOOST_CHECK_EQUAL(0u, ios_.tellg()); ios_.read(&bt, 1); BOOST_MESSAGE("retrieved: " << bt); // prints 'a' BOOST_MESSAGE("current pos: " << ios_.tellg()); //prints 1 BOOST_CHECK_EQUAL(1u, ios_.tellg()); ios_.read(&bt, 1); BOOST_MESSAGE("retrieved: " << bt); // prints 'b' BOOST_MESSAGE("current pos: " << ios_.tellg()); // !!! prints 2, why not -1??? ios_.read(&bt, 1); BOOST_MESSAGE("retrieved: " << bt); // still prints 'b' => nothing retrieved BOOST_MESSAGE("current pos: " << ios_.tellg()); // !!! now it prints -1 BOOST_MESSAGE("eof: " << ios_.eof()); // !!! now eof is true Any ideas why it behaves as described? With Kind Regards, Ovanes

2 2

[Date Time] format_date_parser.parse_date fails to compile with "treat wchar_t as builtin type" set to No
by Daniel Mitchell 17 Aug '11

17 Aug '11

Boost 1.47, using Visual Studio 2010 and Visual Studio 2008, with boost 1.47 both built myself from source and with boost from the boostpro installers. (and with boost 1.47 rebuilt myself with /Zwchar_t- in msvc.jam). If I set "treat wchar_t as builtin type" to "No", then the following code fails to compile: #include <boost/date_time/gregorian/gregorian.hpp> #include <boost/date_time/posix_time/posix_time.hpp> void parseDate() { std::locale locale; boost::date_time::format_date_parser<boost::gregorian::date, wchar_t> parser(L"", locale); boost::date_time::special_values_parser<boost::gregorian::date, wchar_t> svp; boost::gregorian::date date = parser.parse_date(L"", L"", svp); } It gives the following error: c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\lexical_cast.hpp(1116): error C2535: 'bool boost::detail::lexical_stream_limited_src<CharT,Base,Traits>::operator >>(unsigned short &)' : member function already defined or declared with [ CharT=char_type, Base=base, Traits=traits ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\lexical_cast.hpp(993) : see declaration of 'boost::detail::lexical_stream_limited_src<CharT,Base,Traits>::operator >>' with [ CharT=char_type, Base=base, Traits=traits ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\lexical_cast.hpp(1524) : see reference to class template instantiation 'boost::detail::lexical_stream_limited_src<CharT,Base,Traits>' being compiled with [ CharT=char_type, Base=base, Traits=traits ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\lexical_cast.hpp(1653) : see reference to function template instantiation 'Target boost::detail::lexical_cast<Target,src,false,char_type>(const std::basic_string<_Elem,_Traits,_Ax> &,CharT *,size_t)' being compiled with [ Target=short, _Elem=wchar_t, _Traits=std::char_traits<wchar_t>, _Ax=std::allocator<wchar_t>, CharT=char_type ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\lexical_cast.hpp(1641) : while compiling class template member function 'short boost::detail::lexical_cast_do_cast<Target,Source>::lexical_cast_impl(const Source &)' with [ Target=short, Source=src ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\lexical_cast.hpp(1813) : see reference to class template instantiation 'boost::detail::lexical_cast_do_cast<Target,Source>' being compiled with [ Target=short, Source=src ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\date_time\format_date_parser.hpp(72) : see reference to function template instantiation 'Target boost::lexical_cast<int_type,std::basic_string<_Elem,_Traits,_Ax>>(const Source &)' being compiled with [ Target=short, int_type=short, _Elem=wchar_t, _Traits=std::char_traits<wchar_t>, _Ax=std::allocator<wchar_t>, Source=std::basic_string<wchar_t,std::char_traits<wchar_t>,std::allocator<wchar_t>> ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\date_time\format_date_parser.hpp(365) : see reference to function template instantiation 'int_type boost::date_time::fixed_string_to_int<short,charT>(std::istreambuf_iterator<_Elem,_Traits> &,std::istreambuf_iterator<_Elem,_Traits> &,boost::date_time::parse_match_result<charT> &,unsigned int,const charT &)' being compiled with [ int_type=short, charT=wchar_t, _Elem=wchar_t, _Traits=std::char_traits<wchar_t> ] c:\users\danielm\downloads\boost_1_47_0\boost_1_47_0\boost\date_time\format_date_parser.hpp(254) : while compiling class template member function 'boost::gregorian::date boost::date_time::format_date_parser<date_type,charT>::parse_date(std::istreambuf_iterator<_Elem,_Traits> &,std::istreambuf_iterator<_Elem,_Traits> &,std::basic_string<_Elem,_Traits,_Ax>,const boost::date_time::special_values_parser<date_type,charT> &) const' with [ date_type=boost::gregorian::date, charT=wchar_t, _Elem=wchar_t, _Traits=std::char_traits<wchar_t>, _Ax=std::allocator<wchar_t> ] c:\source\dan\boost_wchar_t_test\boost_wchar_t_test\boost_wchar_t_test.cpp(18) : see reference to class template instantiation 'boost::date_time::format_date_parser<date_type,charT>' being compiled with [ date_type=boost::gregorian::date, charT=wchar_t ] If I set "wchar_t is builtin type" to Yes, then it compiles fine. Testing with #pragma message to verify things, BOOST_NO_INTRINSIC_WCHAR_T is defined (or not defined) appropriately depending on how I set that compiler option, so it looks as if Boost knows what's going on at that level. I've tried all the possible reconfigurations I can think of, but this error happens with the boostpro installs, with Boost built unchanged from the 1.47 distribution, and with Boost rebuilt with /Zwchar_t- set in msvc.jam. Is there a way to solve this? The issue originally appears when trying to build code from another library -- but this is a minimal repro it with just boost code, so I think it's a Boost problem, unless I'm missing something. thanks, -- dan

1 0

Boost.Bimap vector_of element access VS 9 compilation errors
by John Eddy 17 Aug '11

17 Aug '11

Hello, I’m having difficulty figuring out how to access elements from a vector_of view in a bimap. The following code does not compile in VS 2008. #include <string> #include <iostream> #include <boost/bimap/bimap.hpp> #include <boost/bimap/vector_of.hpp> using namespace std; using namespace boost::bimaps; int main() { typedef bimap< string, vector_of<int> > bimap_type; bimap_type bm; bm.insert(bimap_type::value_type("zero", 0)); bm.insert(bimap_type::value_type("one", 1)); const bimap_type::right_map& right = bm.right; // Both of the lines below cause compilation failure with vc++ 9.0. bm.right[0]; //bm.right.at(0); return 0; } Can anyone see what I’m doing wrong or is there some other means of accessing the elements of the map via the vector? Thanks, John

1 0

[thread] 1.47 on cygwin 1.7 -> undefined reference to boost::detail::set_tss_data::shared_ptr::tss_cleanup
by Frédéric Bron 17 Aug '11

17 Aug '11

I am trying to use boost 1.47 on cygwin 1.7 cross-compiling to win32 with i686-w64-mingw32-g++ (4.5.3). This program gives me an error: #include <boost/thread/tss.hpp> int main() { boost::thread_specific_ptr<int> ts; return 0; } $ i686-w64-mingw32-g++ -o mgw-release/obj/Tests/toto.o -c -O3 -DNDEBUG -Wall -Wextra -pipe -mthreads -I/cygdrive/d/Softs/1.7/mgw-release/boost/include -I. Tests/toto.cc In file included from /cygdrive/d/Softs/1.7/mgw-release/boost/include/boost/thread/detail/thread_heap_alloc.hpp:15:0, from /cygdrive/d/Softs/1.7/mgw-release/boost/include/boost/thread/tss.hpp:10, from Tests/toto.cc:1: /cygdrive/d/Softs/1.7/mgw-release/boost/include/boost/thread/win32/thread_heap_alloc.hpp:59:40: warning: inline function ‘void* boost::detail::allocate_raw_heap_memory(unsigned int)’ declared as dllimport: attribute ignored /cygdrive/d/Softs/1.7/mgw-release/boost/include/boost/thread/win32/thread_heap_alloc.hpp:69:39: warning: inline function ‘void boost::detail::free_raw_heap_memory(void*)’ declared as dllimport: attribute ignored $ i686-w64-mingw32-g++ -o mgw-release/bin/toto -O3 -DNDEBUG -Wall -Wextra -pipe -mthreads -I/cygdrive/d/Softs/1.7/mgw-release/boost/include mgw-release/obj/Tests/toto.o -Wl,--enable-auto-import -static -L/cygdrive/d/Softs/1.7/mgw-release/boost/lib -lboost_thread_win32 mgw-release/obj/Tests/toto.o:toto.cc:(.text+0x104): undefined reference to `__imp___ZN5boost6detail12set_tss_dataEPKvNS_10shared_ptrINS0_20tss_cleanup_functionEEEPvb' collect2: ld returned 1 exit status any help would be welcome. Regards, Frédéric

3 5

[Regex | Xpressive] Efficiently "grepping" large files
by Thomas Luzat 17 Aug '11

17 Aug '11

Hello, I am looking into Boost.Regex and Boost.Xpressive for implementing grep-like functionality on large files. More specifically I want to check whether a file contains a match for an expression which does not need that much context (a few KB). regex_search and BidirectionalIterators for the whole file work, but there is a complication: I want to do other operations on the file in other threads in parallel (such as calculating hashes and extracting other data). Given that this is mostly I/O bound I would like to avoid rereading portions of the file as much as possible. My idea was to implement a circular buffer which may block the workers (and reading, if data is ever read faster than analyzed). The circular buffer needs to know when old data is no longer required, though, that is regex_search no longer works on it or backtracks into it. The best idea so far is to read blocks of data and do slightly overlapped calls of regex_search on those blocks. This approach has got at least two problems: 1) Matches and context are potentially limited to the size of the overlap. 2) Semantics of the match might be changed if I choose an arbitrary cut for the overlap (e.g. ^ and $ might change because I cut the beginning or end of a line) I would not mind to specify a maximum context of a few KB to maybe 1 MB, but I do not want to change semantics. Is there a better approach? I was thinking about supplying some intelligent iterators, but Regex/Xpressive might leave copies around longer than I anticipate, such that I still cannot decide where they are and how far they may still backtrack. If that's not really possible with the boost libraries I would be interested in alternatives, too. I am already considering looking into some grep implementations. Thanks in advance! Thomas Luzat

3 5

cross-compiling didn't work with boost:filesystem
by rudy b 17 Aug '11

17 Aug '11

Hi, I developed a code on Linux, and the only library that I used was boost:filesystem. I was very happy with the code on Linux, and it never gave me a problem and never broke on me, I tried it on different scenarios and different file types, and I had never issue with boost::filesystem::remove(&path) function. But, now, I needed my code on a Mac machine (but I don't have a Mac) so I borrowed my friend's Mac, and installed xcode, and installed boost_1.47, and I didn't get a single error or warning when installing these packages. As a test, I even ran some simple filesystem examples that were provided. and they all passed. I even used the same "make" file that I had on linux, and it worked great on Mac. (no warnings when compiled) But, when I tried to run my code, I was getting errors with ::remove functions. I am not sure, but I think part of it was because I may have read-only permission on some of the files, and maybe that is why it complained, although I never had this problem in Linux. Also, another part of it could be because of the file naming with white space between its characters: (e.g. "my document.txt" because of this space). I don't know, but I thought that "boost::filesystem" should be independent of the developing platform, and that I could be fairly confident that if it works on one platform (Linux), it should be working on another one (Mac). Any idea, what I am doing wrong, and how this can be fixed? thanks, RB

2 1

[Containers Library Review] The review of the Containers library by Ion Gaztanaga starts today
by John Maddock 17 Aug '11

17 Aug '11

The review of the containers library by Ion Gaztanaga starts today, to summarize the library: "Boost.Container library implements several well-known containers, including STL containers. The aim of the library is to offers advanced features not present in standard containers or to offer the latest standard draft features for compilers that comply with C++03. In short, what does Boost.Container offer? * Move semantics are implemented, including move emulation for pre-C++0x compilers. * New advanced features (e.g. placement insertion, recursive containers) are present. * Containers support stateful allocators and are compatible with Boost.Interprocess (they can be safely placed in shared memory). * The library offers new useful containers: o flat_map, flat_set, flat_multiset and flat_multiset: drop-in replacements for standard associative containers but more memory friendly and with faster searches. o stable_vector: a std::list and std::vector hybrid with random-access iterators that offers iterator stability in insertions and erasures. o slist: the classic pre-standard singly linked list container." Documentation from the library may be viewed online here: file:///M:/data/boost/sandbox/move/libs/container/doc/html/index.html The source may be accessed from the "move" directory of the sandbox SVN or downloaded from http://www.drivehq.com/web/igaztanaga/boost_container.zip. Note that this download contains a copy of the accepted, but not yet release, Boost.Move library - extract the zip over a copy of Boost-1.47 to get a full working copy. Review comments might like to answer the following questions: * What is your evaluation of the design? * What is your evaluation of the implementation? * What is your evaluation of the documentation? * What is your evaluation of the potential usefulness of the library? * Did you try to use the library? With what compiler? Did you have any problems? * How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? * Are you knowledgeable about the problem domain? And finally, every review should answer this question: * Do you think the library should be accepted as a Boost library? Be sure to say this explicitly so that your other comments don't obscure your overall opinion. Regards, John Maddock.

5 5

ublas bug?
by Peter Man 17 Aug '11

17 Aug '11

Hi, I was just wondering if there is a bug in ublas (boost version 1.47): when I use the following code (in debug mode): ublas::matrix<double> m; ublas::matrix<double> m2; m2 = m; this compiles in MSVC 10, but produces a runtime error "Expression: invalid null pointer". I had a look at some of the underlying ublas code, and found that default initialisation of matrices makes the underlying data pointer "data_" be set to NULL, and that when one matrix is copied to another, std::copy is invoked to copy one data_ to the other. However, I looked at the MSVC std::copy definition, and it seems to check for NULLness of the pointers. The following link explains this in more detail: https://connect.microsoft.com/VisualStudio/feedback/details/558044/std-copy… On the plus side, I have no such problem when running the above code in linux. Thanks, Peter

1 0

Simple inclusion of (1.47.0) filesystem.hpp generates compiler errors.
by Bill Moo 17 Aug '11

17 Aug '11

Hello Users, Qt v4.7.2 Boost v1.47.0. Intel Compiler v 12.0.1029.2010 Windows 7 Ultimate N x64 Building an x64 Release binary I have just included the boost/filesystem.hpp file in to my application and re-compiled only for the compiler to generate these errors. As yet I am not using any of the functionality of this I just included the file. Is this another Intel / MSVC STL issue? Sorry for the dump but without it I assume you won't be able to help. ..\Includes\boost/filesystem/v3/operations.hpp(126): error: expected either a definition or a tag name BOOST_SCOPED_ENUM_START(copy_option) ^ ..\Includes\boost/filesystem/v3/operations.hpp(127): error: expected an identifier {none, fail_if_exists = none, overwrite_if_exists}; ^ ..\Includes\boost/filesystem/v3/operations.hpp(127): error: expected a ";" {none, fail_if_exists = none, overwrite_if_exists}; ^ ..\Includes\boost/filesystem/v3/operations.hpp(150): error: identifier "copy_option" is undefined BOOST_SCOPED_ENUM(copy_option) option, // See ticket #2925 ^ ..\Includes\boost/filesystem/v3/operations.hpp(299): error: identifier "copy_option" is undefined BOOST_SCOPED_ENUM(copy_option) option) ^ ..\Includes\boost/filesystem/v3/operations.hpp(303): error: name followed by "::" must be a class or namespace name {detail::copy_file(from, to, copy_option::fail_if_exists);} ^ ..\Includes\boost/filesystem/v3/operations.hpp(306): error: identifier "copy_option" is undefined BOOST_SCOPED_ENUM(copy_option) option, system::error_code& ec) ^ ..\Includes\boost/filesystem/v3/operations.hpp(310): error: name followed by "::" must be a class or namespace name {detail::copy_file(from, to, copy_option::fail_if_exists, &ec);} ^ ..\Includes\boost/filesystem/v3/operations.hpp(642): error: expected either a definition or a tag name BOOST_SCOPED_ENUM_START(symlink_option) ^ ..\Includes\boost/filesystem/v3/operations.hpp(643): error: expected an identifier { ^ ..\Includes\boost/filesystem/v3/operations.hpp(643): error: expected a ";" { ^ ..\Includes\boost/filesystem/v3/operations.hpp(648): warning #12: parsing restarts here after previous syntax error }; ^ ..\Includes\boost/filesystem/v3/operations.hpp(651): error: identifier "symlink_option" is undefined BOOST_BITMASK(BOOST_SCOPED_ENUM(symlink_option)) ^ ..\Includes\boost/filesystem/v3/operations.hpp(651): error: identifier "symlink_option" is undefined BOOST_BITMASK(BOOST_SCOPED_ENUM(symlink_option)) ^ ..\Includes\boost/filesystem/v3/operations.hpp(651): error: identifier "symlink_option" is undefined BOOST_BITMASK(BOOST_SCOPED_ENUM(symlink_option)) ^ ..\Includes\boost/filesystem/v3/operations.hpp(651): error: nonmember operator requires a parameter with class or enum type BOOST_BITMASK(BOOST_SCOPED_ENUM(symlink_option)) ^ ..\Includes\boost/filesystem/v3/operations.hpp(651): error: identifier "symlink_option" is undefined BOOST_BITMASK(BOOST_SCOPED_ENUM(symlink_option)) ^ The two errors above are repeated and repeated many times so I removed then to save bandwidth, space and time. ..\Includes\boost/filesystem/v3/operations.hpp(662): error: name followed by "::" must be a class or namespace name recur_dir_itr_imp() : m_level(0), m_options(symlink_option::none) {} ^ ..\Includes\boost/filesystem/v3/operations.hpp(678): error: name followed by "::" must be a class or namespace name if ((m_options & symlink_option::_detail_no_push) == symlink_option::_detail_no_push) ^ ..\Includes\boost/filesystem/v3/operations.hpp(678): error: name followed by "::" must be a class or namespace name if ((m_options & symlink_option::_detail_no_push) == symlink_option::_detail_no_push) ^ ..\Includes\boost/filesystem/v3/operations.hpp(679): error: name followed by "::" must be a class or namespace name m_options &= ~symlink_option::_detail_no_push; ^ ..\Includes\boost/filesystem/v3/operations.hpp(682): error: name followed by "::" must be a class or namespace name || (m_options & symlink_option::recurse) == symlink_option::recurse)) ^ ..\Includes\boost/filesystem/v3/operations.hpp(682): error: name followed by "::" must be a class or namespace name || (m_options & symlink_option::recurse) == symlink_option::recurse)) ^ ..\Includes\boost/filesystem/v3/operations.hpp(737): error: identifier "symlink_option" is undefined BOOST_SCOPED_ENUM(symlink_option) opt = symlink_option::none) ^ ..\Includes\boost/filesystem/v3/operations.hpp(737): error: name followed by "::" must be a class or namespace name BOOST_SCOPED_ENUM(symlink_option) opt = symlink_option::none) ^ ..\Includes\boost/filesystem/v3/operations.hpp(747): error: identifier "symlink_option" is undefined BOOST_SCOPED_ENUM(symlink_option) opt, ^ ..\Includes\boost/filesystem/v3/operations.hpp(737): error: name followed by "::" must be a class or namespace name BOOST_SCOPED_ENUM(symlink_option) opt = symlink_option::none) ^ ..\Includes\boost/filesystem/v3/operations.hpp(761): error: name followed by "::" must be a class or namespace name m_imp->m_options = symlink_option::none; ^ ..\Includes\boost/filesystem/v3/operations.hpp(783): error: name followed by "::" must be a class or namespace name return (m_imp->m_options & symlink_option::_detail_no_push) ^ ..\Includes\boost/filesystem/v3/operations.hpp(784): error: name followed by "::" must be a class or namespace name == symlink_option::_detail_no_push; ^ ..\Includes\boost/filesystem/v3/operations.hpp(802): error: name followed by "::" must be a class or namespace name m_imp->m_options |= symlink_option::_detail_no_push; ^ ..\Includes\boost/filesystem/v3/operations.hpp(804): error: name followed by "::" must be a class or namespace name m_imp->m_options &= ~symlink_option::_detail_no_push; ^ ..\Includes\boost/filesystem/v3/operations.hpp(988): error: namespace "boost::filesystem3" has no member "copy_option" using filesystem3::copy_option; ^ ..\Includes\boost/filesystem/v3/operations.hpp(1031): error: namespace "boost::filesystem3" has no member "symlink_option" using filesystem3::symlink_option; ^ -- Bill

1 0

[Container] Forward declaration of movable types
by Szymon Gatner 17 Aug '11

17 Aug '11

Hi, I am evaluating container library by Ion Gaztanaga. I know it is not officially a part of boost yet but I didn't know where else to ask this question. My problem: If there is a movable class 'MyMovable' (I use boost.move) it can be stored without unnecessary copies in move-aware vector that is declared like so: vector<MyMovable> movables; which is very cool until this vector is suppose be a member of other class like: //widget.hpp class Widget { vector<MyMovable> movables_; }; which is not cool at all because now widget.hpp must include my_movable.hpp as opposed to just forward declaring it if it stored say vector<shared_ptr<MyMovable>> which in turn makes movability of MyMovable rather useless. I guess my question is: how can one take advantage of move semantics in context of member containers without adding unnecessary class dependencies? Regards, Simon

2 3

About Bug #4978 (deadlock on interrupt)
by Fabien Chêne 17 Aug '11

17 Aug '11

Hello, The bug #4978 seems to be fixed, according to its status. However, is it really fixed in the release 1.47, as indicated by a comment at the end ? I cannot see anything about that in the release note for 1.47. I think that it would be worth mentioning it. Regards, -- Fabien

1 0

Re: [Boost-users] [containers review] A reminder that the containers review ends tomorrow
by John Maddock 17 Aug '11

17 Aug '11

The containers library review is now officially over. However, there are still a few drips a drabs of reviews coming in.... are there any more still pending? Thanks, John.

1 0

[MPI][Boost] Some Questions About Delta Stepping Dijkstra in Boost
by Chen Kai 17 Aug '11

17 Aug '11

Environment: Boost1.47 + Microsoft HPC 2008 SDK I find Delta Stepping Dijkstra and Crauser Dijkstra in boost, and both of them are slower than sequential dijkstra in boost. (About 10 times slower. I used 10 graphs, the biggest graph contains 10 million nodes and 10 million edges) Q1: I wonder why the parallel dijkstra is slower than sequential version? Q2: Can I adjust the number of threads that Delta Stepping used? (For exemple, I want it use 1, 2, 3, 4 threads respectively. And Can I make it sequential version?) Thx --- Chen Kai School of Computer Science, Fudan University blog: http://www.cnblogs.com/remlostime/

1 0

problems with installing boost python
by Wilson Tan 17 Aug '11

17 Aug '11

Hello everyone, I had been trying to build BOOST for SST, but so far I had been unsuccessful with the Python(and IOSTREAM) components. I followed Section 3.1( http://www.boost.org/doc/libs/1_47_0/libs/python/doc/building.html) but even that is not fully successful: wilson@vorpalsword:~/SST/boost_1_47_0$ ./bjam --build-dir=~/SST/boost_1_47_0/libs/python/example/quickstart toolset=gcc --verbose-test test notice: could not find main target test notice: assuming it is a name of file to create. Building the Boost C++ Libraries. Performing configuration checks - has_icu builds : no - ../config//has_gcc_visibility builds : yes - ../config//has_long_double_support builds : yes don't know how to make <e>test ...found 1 target... ...can't find 1 target... wilson@vorpalsword:~/SST/boost_1_47_0$ The first lines of my Python related errors while installing are the following ...skipped <p/usr/local/lib>libboost_iostreams.so for lack of <p/usr/local/lib>libboost_iostreams.so.1.47.0... gcc.compile.c++ bin.v2/libs/python/build/gcc-4.4.3/release/threading-multi/numeric.o In file included from ./boost/python/detail/prefix.hpp:13, from ./boost/python/numeric.hpp:8, from libs/python/src/numeric.cpp:6: ./boost/python/detail/wrap_python.hpp:75:24: error: patchlevel.h: No such file or directory ./boost/python/detail/wrap_python.hpp:78:2: error: #error Python 2.2 or higher is required for this version of Boost.Python. ./boost/python/detail/wrap_python.hpp:142:21: error: Python.h: No such file or directory ./boost/python/detail/wrap_python.hpp:203:4: error: #error "HAVE_LONG_LONG defined but not PY_LONG_LONG or LONG_LONG" In file included from ./boost/python/object/pointer_holder.hpp:14, from ./boost/python/to_python_indirect.hpp:10, from ./boost/python/converter/arg_to_python.hpp:10, Result of whereis: wilson@vorpalsword:~/SST/boost_1_47_0$ whereis python python: /usr/bin/python2.6 /usr/bin/python /etc/python2.6 /etc/python /usr/lib/python3.1 /usr/lib/python2.6 /usr/local/lib/python2.6 /usr/include/python2.6 /usr/share/python /usr/share/man/man1/python.1.gz For good measure, I also specified the interpreter location in project-config.jam. # Python configuration using python : 2.6 : /usr/bin/python ; using mpi ; Could somebody give me pointers on how to fix this and get Python running on Boost? I'd really appreciate it.

2 2

Re: [Boost-users] Custom services using boost::asio
by Marat Abrarov 16 Aug '11

16 Aug '11

Hi, Allan. > The Io part is easy to fit into asio, but I'm having problems seeing what > the best way is to implement the core application event processing. > > Using glib::source I could register an interface where two function is > called: > > bool prepare (int &timeout); > bool dispatch (sigc::slot_base *slot); > > Prepare could set a time out identifying how much time should elapse before > dispatch is ready to process an event. > > When the time is passed, the glib main loop will call the dispatch function, > where I then can process the internal events. > > How can this be implemented in boost::asio io_service? May be boost::asio::deadline_timer can help you? http://www.boost.org/doc/libs/1_47_0/doc/html/boost_asio/overview/timers.ht… http://www.boost.org/doc/libs/1_47_0/doc/html/boost_asio/tutorial/tuttimer2… http://www.boost.org/doc/libs/1_47_0/doc/html/boost_asio/reference/deadline… Regards, Marat Abrarov.

1 0

Building boost from straight Windows Command Prompt
by Michael Powell 16 Aug '11

16 Aug '11

So... If I want to build boost from a straight up Windows Command Prompt in the Visual Studio environment, the key is that we run the VCVARSALL.BAT file prior to running the bootstrap, etc, etc? For instance, if we wanted to route a conditional build of boost through our Continuous Integration process using NAnt, for instance... Thank you... Regards, Michael

2 3

How to iterate nested 'structs' in property tree
by Bill Moo 16 Aug '11

16 Aug '11

Hello List, I have an .info file with the following structure and as I am unable to use BOOST_FOREACH to iterate these I was wondering how it was done? Items { Item { ID 999 Description "Text to describe the item" Stuff1 1 Stuff2 0 Stuff3 7 ItemSettings { Setting1 9 Setting2 12 Setting3 0.1 } SubItems { SubItem { ID 0 Status 0 } SubItem { ID 1 Status 0 } } } Item { ; Structure as above } ; And so on... } -- Bill

1 1

[qi and lambda] Get wrong reaction of the qi::rule if I use lambda for the action
by boost_mailinglist＠gmx.de 16 Aug '11

16 Aug '11

Hello, if I execute the following example, I get the following output "The bad one The good one a" but I only expected "The good one a". Why does it happens? Boost 1.47.0 was used. #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/lambda/lambda.hpp> #include <iostream> int main() { using boost::spirit::qi::char_; using boost::spirit::qi::parse; char const *first = "{a}", *last = first + std::strlen(first); parse(first, last, '{' >> char_("a")[std::cout << "The good one " << boost::lambda::_1 << '\n'] | char_("b")[std::cout << "The bad one " << boost::lambda::_1 << '\n'] >> '}'); return 0; }

2 3

boost multithread use all cores in parallel ?
by Jack Bryan 16 Aug '11

16 Aug '11

Hi, How to make sure that a multithreaded C++ program is run by ALL cores on a multicore server to do computing in parallel physically (not logically). I have a multicore server, which has 24 CPUs, each of which has 6 cores. It is Intel Xeon X5650 2.67GHz cpu cores : 6 (support 6 threads) cpu MHz : 1596.000 totally, I have 24 * 6 = 144 cores. I designed a multithreaded C++ program with boost/thread. How to make sure that my program is run by all 144 cores ? Any help is really appreciated. thanks

10 12

iterator_adaptor : const and regular form
by John M. Dlugosz 15 Aug '11

15 Aug '11

I wrote an iterator by deriving from the boost::iterator_adaptor template. Now I need the const_iterator for my collection, too. The instructions for iterator_adaptor are not clear, but the implication is that I should transfer what I read from iterator_facade. So, is using a const type for the Value (the 3rd template argument) all it takes to write a proper const_iterator? (assuming the functions I supply are proper, too) So, I can just write my iterator as a template of T, passing T through as Value to the iterator_adaptor base class, and then instantiate _that_ with my value type and with const value type to make iterator and const_iterator respectively, right? —John

1 0

[Range] Why adaptor stores iterator_range instead of its underlying range?
by TONGARI 15 Aug '11

15 Aug '11

Hi, I've had this question for a long time, but I still haven't seen others asked the same question. I wonder what's the rationale for range adaptor holding an iterator_range, instead of storing the underlying range (by reference when the range is a container) and calculating begin() and end() on the fly. For C++11 code, it's not unusual to store the temporary expression aside and use it more than once. E.g. vector<int> v = {1, 2, 3}; auto view = v | filtered(...); do_something(view); v.push_back(4); // X do_something(view); Above code is broken since 'v''s iterator is invalidated after X. Could anybody shed some light on this matter?

1 0

[Boost.Range][Boost.Iterators] - iterator as pointer
by Christoph Heindl 15 Aug '11

15 Aug '11

Hi folks, I wonder if it is possible to determine if an iterator or a boost.range can be handled like a pointer to contiguous memory using an iterator/range trait? I need to enable functions if the given range is convertible to a c-array like pointer range. Best regards, Christoph

3 6

[geometry] weird define in adapted fusion sequence
by alfC 15 Aug '11

15 Aug '11

Hi, Trying (again) to use Boost.Geometry with coordinates with Boost.Units (BTW, what is the status of the compatibility between geometry and units?) I found the following macro definition in boost/ geometry/geometries/adapted/boost_fusion.hpp // Convenience registration macro to bind a Fusion sequence to a CS #define BOOST_GEOMETRY_REGISTER_BOOST_FUSION_CS(CoordinateSystem) \ namespace boost { namespace geometry { namespace traits { \ template <typename Sequence> \ struct coordinate_system \ < \ Sequence, \ typename boost::enable_if \ < \ fusion_adapt_detail::is_fusion_sequence<Sequence> \ >::type \ > \ { typedef cs::cartesian type; }; \ }}} Unless I am missing something, the definition of the macro does not depend on the parameter "CoordinateSystem" !. To make the situation even more confusing the manual's example (http://www.boost.org/doc/ libs/1_47_0/libs/geometry/doc/html/geometry/reference/adapted/ boost_fusion.html) uses the struct as the parameter and not the coordinate system ! Unless I am wrong the last lines of the definition of BOOST_GEOMETRY_REGISTER_BOOST_FUSION_CS should be: { typedef CoordinateSystem type; }; \ }}} and the manual should be updated accordingly. E.g. the example should read BOOST_FUSION_ADAPT_STRUCT(sample_point, (double, x) (double, y) (double, z)) BOOST_GEOMETRY_REGISTER_BOOST_FUSION_CS(cs::cartesian) Am I missing something? Thanks, Alfredo

3 2

Problem building boost\optional\optional.hpp in VS2010
by Pally Sandher 15 Aug '11

15 Aug '11

Hi, We've been using boost v1.36 in Visual Studio 2005 for a few years now. I'm attempting to upgrade our projects & solutions to build in Visual Studio 2010 & thus I've upgraded to boost 1.47.0. However I'm getting an error when trying to compile a project which uses some boost functions Full text of the error message is as follows: 1> ASIMNET.CPP 1>c:\code\inc\boost\optional\optional.hpp(346): error C2061: syntax error : identifier 'm_storage' 1> c:\code\inc\boost\optional\optional.hpp(345) : while compiling class template member function 'void boost::optional_detail::optional_base<T>::construct(const std::locale &)' 1> with 1> [ 1> T=boost::io::detail::locale_t 1> ] 1> c:\code\inc\boost\optional\optional.hpp(500) : see reference to class template instantiation 'boost::optional_detail::optional_base<T>' being compiled 1> with 1> [ 1> T=boost::io::detail::locale_t 1> ] 1> c:\code\inc\boost\format\internals.hpp(56) : see reference to class template instantiation 'boost::optional<T>' being compiled 1> with 1> [ 1> T=boost::io::detail::locale_t 1> ] 1> c:\code\inc\boost\format\internals.hpp(57) : see reference to class template instantiation 'boost::io::detail::stream_format_state<Ch,Tr>' being compiled 1> 1>Build FAILED. 1> The only references to boost in ASIMNET.CPP are as follows: #include <boost/math/special_functions/round.hpp> translation[X] = boost::math::round( (translation[X]/TILEWIDTH) ) * TILEWIDTH; translation[Y] = boost::math::round( (translation[Y]/TILEWIDTH) ) * TILEWIDTH; Any help will be most appreciated. Thanks, Palbinder Sandher Software Deployment Engineer T: +44 (0) 141 945 8500 F: +44 (0) 141 945 8501 http://www.iesve.com **Design, Simulate + Innovate with the <Virtual Environment>** Integrated Environmental Solutions Limited. Registered in Scotland No. SC151456 Registered Office - Helix Building, West Of Scotland Science Park, Glasgow G20 0SP Email Disclaimer

2 2

boost.clang -- linq like operations in C++
by Julien Nitard 15 Aug '11

15 Aug '11

Hi All, Some (rather long) time ago there were some talks and some code written about LINQ-like feature for C++, notably one named boost.qlang. Were there any followups ? Is there any equivalent in other libraries ? The original thread: http://boost.2283326.n4.nabble.com/C-LINQ-is-cool-What-about-boost-qlang-td… Thanks for any help, Julien

4 3

boost timer
by Kraus Philipp 15 Aug '11

15 Aug '11

Hello, I would like to calculate the runtime of my algorithms. I have written a MPI based algorithms and must determine the duration of the algorithm on each CPU. I would like to show the really duration, which is based on Amdahls law, so I need a "exactly" timer. Can I use the Boost Timer / Boost MPI Timer to calculate the duration between start and end of my algorithm? On large datasets I think the timer is a good choice. Is the resolution of the timer object just enough for small amounts of data? I would like to do this: timer t; run_algorithm; std::cout << t.elapsed << std::endl; Is a timer object a good choice to determine runtime structure or do you a better structure? Thanks Phil

6 8

Compiler warnings when compiling property_tree v1.47.0
by Bill Moo 15 Aug '11

15 Aug '11

Hello Users, I am using the Intel compiler v12.0.1029.2010 on Windows 7 x64 and when compiling the property_tree (v1.47.0) I get lots of warnings reported: infoStruct.cpp ..\..\Includes\boost/mpl/aux_/has_begin.hpp(20): warning #2586: 'test' : decorated name length exceeded, name was truncated BOOST_MPL_HAS_XXX_TRAIT_NAMED_DEF(has_begin, begin, true) This is one of many similar warnings generated and I was wondering if anyone could shed some light on how this can be solved. The code compiles of course and the library builds but I'd rather not have them at all. I would appreciate your comments on this thanks. -- Bill

2 1

[serialization] bad cast for shared library compiled by g++ with visibility=hidden
by Pavol Juhas 15 Aug '11

15 Aug '11

Hello, I am working on a C++ shared library (DLL) that should have a hierarchy of serializable classes using fixed archive format. The serialize template methods of the classes are all instantiated in the DLL, the idea is the library clients should be able to load/save derived objects using shared_ptr<Base>, without an explicit knowledge of the Derived classes. Everything seems to work fine if I build the shared library with g++ using the default visibility option (i.e., every function in the DLL is exported). However, if I compile the code with "-fvisibility=hidden" the test program crashes with bad_cast exception, whenever it tries to serialize a derived object stored as a shared_ptr<Base>. Strangely, if I build the library with NDEBUG defined, the code works fine. The difference seems to be in serialization/smart_cast.hpp which uses different cast code with the NDEBUG macro defined. Any idea why is this happening? Is serialization supported for the shared libraries build with g++ -fvisibility=hidden option? I am using g++ 4.4.3 and the Boost libraries 1.40. Attached is a minimum example where the testlib.hpp and testlib.cpp are the shared library and testprg.cpp is the test program. The code can be built with the attached Makefile as follows: (a) make clean runtest - default g++ visibility, test program works (b) make clean runtest VISIBILITY=1 - builds the library with -fvisibility=hidden, test program fails with the bad_cast exception (c) make clean runtest VISIBILITY=1 NDEBUG=1 - builds the library with -fvisibility=hidden and NDEBUG defined. test program works. Thank you for any pointers, Pavol

1 0

Complier errors using property_tree 5 minute tutorial
by Bill Moo 14 Aug '11

14 Aug '11

Hello Users, I am using boost 1.47.0's property_tree on Windows 7 x64 using the Intel Compiler v 12.0.1029.2010 and having followed the 5 Minute Tutorial to the letter I get errors at complie time. This is my header file : #ifndef INFOSTRUCT_HPP #define INFOSTRUCT_HPP #include <string> struct INFO { unsigned m_Type ; std::string m_Desc ; std::string m_User ; std::string m_Pass ; std::string m_Server ; void load(const std::string & fileName) ; void save(const std::string & fileName) ; } ; #endif // INFOSTRUCT_HPP and this is the .cpp file: #include <boost/property_tree/ptree.hpp> #include <boost/property_tree/xml_parser.hpp> #include "infoStruct.hpp" void INFO::load(const std::string &fileName) { boost::property_tree::ptree pTree ; boost::property_tree::xml_parser::read_xml(fileName, pTree) ; m_Type = pTree.get("Database.Driver", 0) ; m_Pass = pTree.get < std::string>("Database.Pass") ; } void INFO::save(const std::string &fileName) { return ; } But when I compile this I get lots and lots of compiler errors this most significant of those being: ..\..\Includes\boost/property_tree/detail/ptree_implementation.hpp(52): error #501: argument of type "const std::string std::_Pair_base<const std::string, boost::property_tree::basic_ptree<std::string, std::string, std::less<std::string>>>::*" is incompatible with template parameter of type "const std::string std::pair<const std::string, boost::property_tree::basic_ptree<std::string, std::string, std::less<std::string>>>::*" &value_type::first>, ^ detected during: instantiation of class "boost::property_tree::basic_ptree<Key, Data, KeyCompare>::subs [with Key=std::string, Data=std::string, KeyCompare=std::less<std::string>]" at line 182 instantiation of "boost::property_tree::basic_ptree<Key, Data, KeyCompare>::basic_ptree() [with Key=std::string, Data=std::string, KeyCompare=std::less<std::string>]" at line 8 of "..\DataFactory\infoStruct.cpp" With the line in question being : boost::property_tree::ptree pTree ; I honestly cannot see where or what I am doing wrong, so I am hoping someone here can help me. -- Bill

2 4

[mpl][fusion] Issues in the mpl/fusion interface
by Gabriel Redner 14 Aug '11

14 Aug '11

Hi all, I am writing some code which uses MPL and fusion together, and in general I am happy with their interoperability. However, I have stumbled on a few areas in which functionality I expected was missing, or where expressions I expected to work did not. All of these issues have workarounds, but I'd appreciate some input on whether the problem is with the libraries, or with my expectations. 1. mpl::pair and fusion::pair Fusion sequences are conforming MPL sequences, and MPL sequences can be transmuted into fusion sequences. However, the same is not true of their pair classes. I feel that fusion::pair ought to conform to some "MPL pair" concept such that: - I can access its types by the same 'first' and 'second' members as in mpl::pair - mpl::first and mpl::second metafunctions should work against it For instance, I'd like to be able to extract a sequence of key types from a map: // OK! typedef mpl::map<mpl::pair<int, char>, mpl::pair<bool, short> > m1; typedef mpl::transform< m1, mpl::first<mpl::placeholders::_1>, mpl::back_inserter<mpl::vector<> > >::type keys1; // Not OK! typedef fusion::map<fusion::pair<int, char>, fusion::pair<bool, short> > m2; typedef mpl::transform< m2, mpl::first<mpl::placeholders::_1>, mpl::back_inserter<mpl::vector<> > >::type keys2; // OK, but requires different code for mpl and fusion maps typedef mpl::transform< m2, fusion::result_of::first<mpl::placeholders::_1>, mpl::back_inserter<mpl::vector<> > >::type keys3; Also, I feel there should be a canned way to translate mpl::pair into fusion::pair. fusion::result_of::as_pair? 2. mpl::map and fusion::map This code works nicely: typedef mpl::vector<int, char, bool> v1; typedef fusion::result_of::as_vector<v1>::type v2; v2 v(1, 'a', false); However, this does not: typedef mpl::map<mpl::pair<int, char>, mpl::pair<bool, short> > m1; typedef fusion::result_of::as_map<m1>::type m2; m2 m('a', 3); The type 'm2' ends up as fusion::map<mpl::pair<int, char>, mpl::pair<bool, short> >, which clearly is no good. I feel that as_map should automatically translate mpl::pair to fusion::pair so that the result is a usable container. Please let me know if I am barking up the wrong tree, or whether these seem like useful features to anyone else. If there is consensus that they are useful, I would be interested in developing patches for them. Thanks, -Gabe

2 2

Re: [Boost-users] adding elements to a std::container in a
by Martin Elzen 14 Aug '11

14 Aug '11

> Subject: [Boost-users] adding elements to a std::container in a single > expression > Message-ID: <j2787j$bj9$1(a)dough.gmane.org> > Content-Type: text/plain; format=flowed; charset="iso-8859-1"; > reply-type=original > > until now I've usually written my own template to do this: > > > template<typename T> > struct push_back_container:T > { push_back_container &_push_back(const typename T::value_type &_r) > { push_back(_r); > return *this; > } > }; > > one can use this like this: > > push_back_container<std::vector<something> > >()._push_back(something1)._push_back(_something2) > > Is there some more elegant way to do this? Been there, and had the same issues. I've always wondered why std::vector gives you so many ways to assign values to it, but so few to append items, as personally I want to append items much more often than totally change a vector's contents. For what you want to do there is also a standard assign-with-back-inserter whatchamacallit : include vector include algorithm // assign include iterator // back_inserter std::copy( source.begin(), source.end(), std::back_inserter( targetSequenceWithpush_back_memberFn ) );

1 0

Chrono - setting system time
by asif saeed 14 Aug '11

14 Aug '11

Hi, Can Chrono be used to set system time? I have a piece of Windows code using SYSTEMTIME struct for setting all the fields and then calling SetLocalTime(). Is there any facility in boost::chrono to do the same portably? Best regards, Asif

2 1

Issues with brent_find_minima
by Frank Astier 14 Aug '11

14 Aug '11

I must be missing something: the following program doesn't seem to find the right minimum (boost 1.47.0). double f(double x) { return x * cos(x); } int main(int argc, char** argv) { cout << brent_find_minima(f, 3.0, 4.0, 1e-8) << endl; return 0; } I get: 4 -2.61457 But I think the minimum is -3.28837 at x = 3.42562. Did I miss something in calling brent_find_minima?? Also, this function should be called "brent_find_minimum" since it finds a single minimum, IMHO. The singular is minimum in Latin, minima is the plural. Or can the function be called repetitively and each time return a different minimum?? Frank fastier(a)yahoo.com

3 2

[serialization] unregistered class exception when using BOOST_CLASS_EXPORT_GUID
by Ron Hashimshony 14 Aug '11

14 Aug '11

Ron Hashimshony wrote: > Hi all boost users, > We have been using boost.serialization for years. We want to move > from 1.33 to 1.47 and encountered a problem. > Many of our classes are abstract, and the derived are defined with > BOOST_CLASS_EXPORT_GUID. > At one point in time, a new class (B) was added that derives from a > class that was defined with the BOOST_CLASS_EXPORT_GUID macro (A). > It all worked well in 1.33. In 1.47, when we get to de-serialize > class A, we get an exception of unregistered class. > We traced it down, and found out that if we remove the derived class > (B), it > works fine, but this is not an option, and then the derived class (B) > cannot be de-serialized from the file... > If there any way to bypass this problem? was there a change made that > broke this > functionality? > Many Thanks! > Ron > I believe this is a problem introduced in version 140 which is under investigation. Which type of archive are you using? Robert Ramey Hi Robert, We are using XML archives only at the moment. we want to use the portable binaries as well. Any idea when this problem will be solved? Thanks.

1 0

adding elements to a std::container in a single expression
by Peter Foelsche 14 Aug '11

14 Aug '11

until now I've usually written my own template to do this: template<typename T> struct push_back_container:T { push_back_container &_push_back(const typename T::value_type &_r) { push_back(_r); return *this; } }; one can use this like this: push_back_container<std::vector<something> >()._push_back(something1)._push_back(_something2) Is there some more elegant way to do this? Peter

2 1

[C++0x] ISO/IEC approves C++0x standard!
by Beman Dawes 13 Aug '11

13 Aug '11

The C++0x standard has been approved by ISO/IEC. The vote was unanimous; all 21 National Bodies voting were in favor. That means the dozen or so Boost libraries that were in TR1 are now part of the standard itself. Good work, Boosters! --Beman

2 1

[serialization] unregistered class exception when using BOOST_CLASS_EXPORT_GUID
by Ron Hashimshony 13 Aug '11

13 Aug '11

Hi all boost users, We have been using boost.serialization for years. We want to move from 1.33 to 1.47 and encountered a problem. Many of our classes are abstract, and the derived are defined with BOOST_CLASS_EXPORT_GUID. At one point in time, a new class (B) was added that derives from a class that was defined with the BOOST_CLASS_EXPORT_GUID macro (A). It all worked well in 1.33. In 1.47, when we get to de-serialize class A, we get an exception of unregistered class. We traced it down, and found out that if we remove the derived class (B), it works fine, but this is not an option, and then the derived class (B) cannot be de-serialized from the file... If there any way to bypass this problem? was there a change made that broke this functionality? Many Thanks! Ron

2 1

Re: [Boost-users] [!! SPAM] [Boost.Wave] util::file_position<> and asserted !is_escaped_lit(..) requirement
by Hartmut Kaiser 13 Aug '11

13 Aug '11

> (Using namespace boost::wave here on.) > > It seems that util::file_position<> has an assertion that checks if a > given filename contains any following sequences: <\\>, <\"> or <\?> (using > util::debug::is_escaped_lit). > > I wonder why file_position<> does need to check this and if it's so > crucial why it's done using a mere BOOST_ASSERT? > > Now, here's comes the reason why I'm asking this: At least with MSVC9's > remote debugger (or some other lowlevel component; not really the > interesting part > here) translates all network shares on a remote computer to UNC-paths. > This is correct behaviour and actually a very neat feature. However, as > you might be already aware at this point this leads to the actual problem: > Any UNC-path triggers (consider <\\foo\path\file>) the assertion and > things go boom. > > It is not possible to easily work around this by refactoring user code > and/or input values as provided filenames are completed internally using > util::complete_path (after which <file> becomes <\\foo\path\file> etc. in > this case). > > I tried to disable this assertion (actually, there's two; one in the > constructor and one in the set_file member function) and didn't see any > strange behaviour. E.g. std::ifstream handling with UNC-paths in > iteration_context_policies::load_file_to_string::inner<> worked just fine, > as expected from a native STL. > > Goes without saying that I'm using the latest Boost version (1.47.0). I > would be very pleased if anyone could shed some light on this matter or > better still > - fix it permanently. Right, that's apparently a leftover from old boost.filesystem times, when it did not support UNC paths. I'll remove the checks asap. Regards Hartmut --------------- http://boost-spirit.com

1 0

[serialization] overloading load_construct_data: no accessible constructor at all
by Griffin Howlett 13 Aug '11

13 Aug '11

Hey, so I'm using the boost::serialization library, and I'm trying to override how a class is constructed, since it has no default constructor. This is demonstrated here<http://www.boost.org/doc/libs/1_47_0/libs/serialization/doc/serialization.h…>. To me it appears the function ONLY takes the `class* t` and then sets it to point to a newly constructed object. If I'm wrong, this is definitely the source of my error. However, the only way to construct my class is by using another classes `create()` function, meaning I need to stray from the code in the example (this is stated in the boost::serialization namespace): `::new(t)my_class(attribute);` I tried simply calling the create function and setting `t` equal to the returned pointer, but this doesn't seem to work because right after the `load_construct_data function`, and in the `serialization function`, the given `myClass&` is not the same as what I set 't' to. *How do I do whatever ::new(t) is doing so the object created using the create function follows through into the serialize/other functions?* [1]: http://www.boost.org/doc/libs/1_47_0/libs/serialization/doc/serialization.h…

1 0

JSON Property file reader compile problem
by Scott Smith 13 Aug '11

13 Aug '11

I'm trying to use the boost property tree to read a json file. I'm using 1.46 on gcc 4.6 (Fedora 15). I'm also running on Eclipse (Indigo) which is relevant for something I mention below. Here's the issue . I have a JSON file which has an array of parameters which looks something like: { "config": { "modules": [ { "name": "somename0", "param1": "someparam", "param2":"someotherparm" }, { "name": "somename1", "param1": "someparam", "param2":"someotherparm" }, { "name": "somename2", "param1": "someparam", "param2":"someotherparm" } ] } } So, I wrote the following code (Note that I can't use boost:FOR_EACH because of some bug in eclipse (#332278) which causes an error-or so I believe): ptree v = pt.get<ptree>("config.modules"); for (ptree::iterator it = v.begin() ; it != v.end ; ++it) { ptree module = ???; } The first two lines seem to compile fine. I'm assuming that what I get from v is the "root" ptree (the parent) for the various "modules" objects and that the iterator will walk through them. However, I've tried all sorts of things trying to get at the module data (e.g., it->second, (*it)->second, ...) and clearly I don't know what it is I need to tell the compiler I want. All I get are compile errors. The compiler is giving me no hints as to what I need to tell it. Can someone tell me what I'm missing here? Thanks Scott

2 1

(no subject)
by Hasanul Ferdaus 12 Aug '11

12 Aug '11

living paycheck to paycheck wasnt working for me I told myself to stay positive without this id still be completely distraught! <a href="http://salanowyswiat.home.pl/PhilipBennett68.html">http://salanowyswiat.home.pl/PhilipBennett68.html</a> I waited so long for my time to shine

1 0

[ASIO] Send data on a socket
by Claude 12 Aug '11

12 Aug '11

I created a socket with BOOST asio and I use it in a server process that accepts connections from "remote" client. It is possible from the process that created the socket, send data to the same socket simulating the arrival of data from a client process? -- View this message in context: http://boost.2283326.n4.nabble.com/ASIO-Send-data-on-a-socket-tp3738099p373… Sent from the Boost - Users mailing list archive at Nabble.com.

3 3

[Boost.Wave] util::file_position<> and asserted !is_escaped_lit(..) requirement
by Pekka Seppänen 12 Aug '11

12 Aug '11

Hello. (Using namespace boost::wave here on.) It seems that util::file_position<> has an assertion that checks if a given filename contains any following sequences: <\\>, <\"> or <\?> (using util::debug::is_escaped_lit). I wonder why file_position<> does need to check this and if it's so crucial why it's done using a mere BOOST_ASSERT? Now, here's comes the reason why I'm asking this: At least with MSVC9's remote debugger (or some other lowlevel component; not really the interesting part here) translates all network shares on a remote computer to UNC-paths. This is correct behaviour and actually a very neat feature. However, as you might be already aware at this point this leads to the actual problem: Any UNC-path triggers (consider <\\foo\path\file>) the assertion and things go boom. It is not possible to easily work around this by refactoring user code and/or input values as provided filenames are completed internally using util::complete_path (after which <file> becomes <\\foo\path\file> etc. in this case). I tried to disable this assertion (actually, there's two; one in the constructor and one in the set_file member function) and didn't see any strange behaviour. E.g. std::ifstream handling with UNC-paths in iteration_context_policies::load_file_to_string::inner<> worked just fine, as expected from a native STL. Goes without saying that I'm using the latest Boost version (1.47.0). I would be very pleased if anyone could shed some light on this matter or better still - fix it permanently. Br, Pekka

1 0

async_read_some() not found??
by Claude 12 Aug '11

12 Aug '11

I have this code (from async_read_until boost documentation): boost::asio::streambuf b; void handler(const boost::system::error_code& e, std::size_t size) { if (!e) { std::istream is(&b); std::string line; std::getline(is, line); // ... } } boost::asio::async_read_until(s, b, "\r\n", handler); But I obtain this error on Ubuntu 11.04 (boost 1.45.0): boost/asio/impl/read_until.hpp|388|*error: request for member ‘async_read_some’* in ‘((boost::asio::detail::read_until_delim_op<boost::asio::basic_stream_socket<boost::asio::ip::tcp>*, std::allocator<char>, void (*)(const boost::system::error_code&, unsigned int)>*)this)->boost::asio::detail::read_until_delim_op<boost::asio::basic_stream_socket<boost::asio::ip::tcp>*, std::allocator<char>, void (*)(const boost::system::error_code&, unsigned int)>::stream_’, which is of non-class type ‘boost::asio::basic_stream_socket<boost::asio::ip::tcp>*’ I Included in my project: libpthread libboost_system -- View this message in context: http://boost.2283326.n4.nabble.com/async-read-some-not-found-tp3732368p3732… Sent from the Boost - Users mailing list archive at Nabble.com.

2 2

[filesystem] misidentifies file type on Solaris x86 64-bit
by Will Mason 11 Aug '11

11 Aug '11

Hello, I'm using Boost 1.46.1 with filesystem v3. Code that I've been running successfully on Windows, Linux and FreeBSD started producing very mysterious results on Solaris. I boiled it down to this: boost::filesystem will not identify a directory as a directory. Here's a test program: #include <boost/filesystem.hpp> int main() { try { boost::filesystem::path d(boost::filesystem::absolute("dir")); if (boost::filesystem::exists(d)) { std::cout << d << " already exists" << std::endl; } else { boost::filesystem::create_directory(d); std::cout << d << " is " << (boost::filesystem::is_directory(d) ? "" : "not") << " a directory" << std::endl; } } catch (std::exception& e) { std::cout << "Exception: " << e.what() << std::endl; } return 0; } And here is a snippet of a terminal session compiling and running the program: $ CC -o fstest fstest.cpp -library=stlport4 -Iexternal/solaris/x86/64/suncc/5.11/include external/solaris/x86/64/suncc/5.11/lib/libboost_filesystem.a external/solaris/x86/64/suncc/5.11/lib/libboost_system.a $ ./fstest "/export/home/will/Projects/cap/dir" is not a directory $ file /export/home/will/Projects/cap/dir /export/home/will/Projects/cap/dir: directory $ Thanks for any help, Will

1 0

Boost Unit test on Eclipse
by Yong Qin 11 Aug '11

11 Aug '11

I have tried to use boost unit test on Eclipse CDT w/ MinGW and VC++. But I can not link to the static boost library: libboost_unit_test_framework-vc100-mt-1_47.lib. The code I used: #defineBOOST_TEST_MAIN #defineBOOST_TEST_MODULEMasterTestSuite #include<boost/test/unit_test.hpp> BOOST_AUTO_TEST_SUITE(FooTests) BOOST_AUTO_TEST_CASE(ctor_test1) { Fooa; BOOST_CHECK_EQUAL(a.name(),MY_PROJECT_NAMESPACE::Foo::DEF_NAME); } BOOST_AUTO_TEST_CASE(ctor_test2) { conststd::stringtheName("Blah"); Fooa(theName); BOOST_CHECK_EQUAL(a.name(),theName); } BOOST_AUTO_TEST_SUITE_END() What is wrong?

4 4

program_options: accepting NaNs for doubles
by Rhys Ulerich 11 Aug '11

11 Aug '11

Hi all, program_options does not accept NaN or Inf as valid double input. For example, the following sequence modifies the "Getting Started" first.cpp [1] to accept double input: cp $BOOST_SOURCE/libs/program_options/example/first.cpp . perl -pi -e 's/<int>/<double>/;' first.cpp LDFLAGS="-lboost_program_options" make first # ...or whatever The modified example indeed barfs on NaN or Inf input: $ ./first --compression=5.5 Compression level was set to 5.5. $ ./first --compression=Inf error: in option 'compression': invalid option value 'Inf' $ ./first --compression=NaN error: in option 'compression': invalid option value 'NaN' Two questions: 1) Does this count as a bug? 'std::cin >> foo' doesn't grok Inf or NaNs (on my system anyhow) but methods like strtod() do. Users providing explicit infinities or not-a-numbers as options parameters likely don't do so accidentally. This Inf/NaN behavior is not mentioned in the active tickets. 2) Can anyone suggest a workaround (shy of using string-based parameters and calling strtod myself)? Thanks, Rhys [1] http://www.boost.org/doc/libs/1_47_0/doc/html/program_options/tutorial.html…

2 2

Re: [Boost-users] Boost-users post acknowledgement
by Yong Qin 11 Aug '11

11 Aug '11

for VC, I try to link to: libboost_test_exec_monitor-vc100-mt-1_47.lib and got error: LNK1561: entry point must be defined VCApp_Test line 0 C/C++ Problem for MinGW, I try to link to: libboost_test_exec_monitor-mgw46-mt-1_47.a and got error: undefined reference to `__chkstk_ms' MinGWApp_Test line 0, external location: D:\boost_1_47_0-MinGW\stage\static\lib\libboost_unit_test_framework-mgw46-mt-1_47.a(unit_test_parameters.o):unit_test_parameters.cpp C/C++ Problem undefined reference to `std::__detail::_List_node_base::_M_hook(std::__detail::_List_node_base*)' MinGWApp_Test line 0, external location: D:\boost_1_47_0-MinGW\stage\static\lib\libboost_unit_test_framework-mgw46-mt-1_47.a(unit_test_suite.o):unit_test_suite.cpp C/C++ Problem undefined reference to `std::__detail::_List_node_base::_M_unhook()' MinGWApp_Test line 0, external location: D:\boost_1_47_0-MinGW\stage\static\lib\libboost_unit_test_framework-mgw46-mt-1_47.a(unit_test_suite.o):unit_test_suite.cpp C/C++ Problem

1 0

question about Boost naming
by Yong Qin 11 Aug '11

11 Aug '11

I am using Boost test library now and find there are several libraries there: libboost_unit_test_framework-mgw46-1_47.a libboost_unit_test_framework-mgw46-mt-1_47.a libboost_unit_test_framework-mgw46-s-1_47.a what are differences between the 3 libraies (with "s", or with "mt", or no "mt" and "s")? also, for VC++ compiler, there is: boost_unit_test_framework-vc100-mt-1_47.dll but MinGW have: libboost_unit_test_framework-mgw46-mt-1_47.dll libboost_unit_test_framework-mgw46-1_47.dll Why MinGW have more?

6 6

[boost-build] Dynamic linking dependency propagation on mac os x
by Tim Odenthal 11 Aug '11

11 Aug '11

Dear list, i'm trying to compile an existing project which compiles fine on Windows (where we link statically) and linux (where linking is default, i.e. dynamic) on Mac OS X (10.7). I'm essentially trying to use the same configuration as on linux, since darwin ~ gcc… The project makes use of (and therefore links to) several boost libraries including system, filesystem, serialization,… We create several libraries which depend upon each other: - lib1depends on serialization,filesystem,… - lib2 depends on lib1 - lib3 depends on lib1 and lib2 -> here's the first problem: the (implicit) dependence on system, filesystem and serialization is not automatically resolved anymore. At least, the linker complains about missing symbols, since the "g++"-command-line doesn't include the libraries. I could solve that by adding those libraries to the requirements with <use>/boost/serialization, etc. -lib4 depends on lib3 -> here's the real problem: again, the implicit dependence on (specifically) lib1 and the boost-libs is lost. I can use the same trick as before with the boost-libs, but whatever I do, I cannot make the "lib1.dylib" appear in the "g++" command-line. When I execute the command by hand - adding lib1.dylib - it executes fine & the linker does not complain. How/why does that happen? My user-config.jam simply consists of: using darwin : : : <compileflags>-DBOOST_WAVE_SUPPORT_THREADING=0 ; What else do I need to configure differently on Mac OS X? Thanks a lot in advance for any suggestions Tim

1 0

Windows Installer Build
by asif saeed 11 Aug '11

11 Aug '11

Hi, I installed Boost 1.47 using Windows Installer. I have Visual C++ 2010 Express installed and I installed Platform SDK for 2003 and Windows Driver Kit, that give me MFC/ATL, etc., separately. However, I have to set the directories in each project before I build anything otherwise the VC++ 2010 picks up the Windows SDK 7.0 that gets installed by default by Visual C++ 2010 Express. So Boost installer, I suspect, too picked up the wrong SDK, Windows SDK 7, directories instead of the those of the platform SDK. I suspect so because upon including ASIO header and just getting an IP Address string, I get build warnings like these: Please define _WIN32_WINNT or _WIN32_WINDOWS appropriately. For example: - add -D_WIN32_WINNT=0x0501 to the compiler command line; or - add _WIN32_WINNT=0x0501 to your project's Preprocessor Definitions. Assuming _WIN32_WINNT=0x0501 (i.e. Windows XP target). File0001.cpp Please define _WIN32_WINNT or _WIN32_WINDOWS appropriately. For example: - add -D_WIN32_WINNT=0x0501 to the compiler command line; or - add _WIN32_WINNT=0x0501 to your project's Preprocessor Definitions. Assuming _WIN32_WINNT=0x0501 (i.e. Windows XP target). File0002.cpp Second_test.cpp Please define _WIN32_WINNT or _WIN32_WINDOWS appropriately. For example: - add -D_WIN32_WINNT=0x0501 to the compiler command line; or - add _WIN32_WINNT=0x0501 to your project's Preprocessor Definitions. Assuming _WIN32_WINNT=0x0501 (i.e. Windows XP target). Any idea how I can fix this? Best, Asif

1 0

Re: [Boost-users] [asio] user defined composed operations and strands
by Marat Abrarov 11 Aug '11

11 Aug '11

Hi, Tacheon. > If async_write_data is called and io_service::run is called from multiple threads, strands are should > be necessary to avoid raced. > The question is: How do I support handlers wrapped in a strand and how do I get this strand forwarded > to async_read? > As far as I understand this should be somehow possible by using asio_handler_invoke but the > documentation is a bit too fuzzy on the topic for me to understand. There is no such info in Asio docs. You may look at asio-samples (http://sourceforge.net/projects/asio-samples) There is ma::context_wrapped_handler class (and ma::make_context_wrapped_handler helper function) that makes such a wrapper for intermediate handler. But you shouldn't use > typedef boost::function<void (error_t const &)> completion_handler_t; because it hides asio_hanlder_invoke defined for the original (user supplied) handler. You may write something like this: class io_port { public: //Ctors and so on... template<typename Handler> void async_read_data ( raw_buffer_t & buffer , Handler const & handler) { //uses a composed operation itself... boost::asio::async_read ( socket , boost::asio::buffer(header) , ma::make_context_wrapped_handler(handler, boost::bind ( &io_port::handle_header_received<Handler> , this , boost::ref(buffer) , handler , boost::asio::placeholders::error))); } //first intermediate handler template<typename Handler> void handle_header_received ( raw_buffer_t & data , Handler const & handler , boost::system::error_code const & error { if(error) { handler(error_t(error)); } else { prepare_buffer(data, header.perparation_data()); //pseudo-code //uses a composed operation itself... boost::asio::async_read ( socket , boost::asio::buffer(data) , ma::make_context_wrapped_handler(handler, boost::bind(&io_port::handle_data_received<Handler> , this , boost::ref(buffer) , handler , boost::asio::placeholders::error) ); } } //second intermediate handler template<typename Handler> void handle_data_received ( raw_buffer_t & data , Handler const & handler , boost::system::error_code const & error ) { if(error) { handler(error_t(error)); } else { handler(error_t()); } } }; Also, it will be very helpful to read Asio sources: /boost/asio/impl/read.hpp: 339 and 145 (Boost 1.47). May be it' will be better to implement io_port class similar to boost::asio::detail::read_op. Regards, Marat Abrarov.

2 1

question about changing permission with boost
by rudy b 11 Aug '11

11 Aug '11

Hi, I am trying to copy a file from one folder to another, but I am also trying to access to the last_write_time of the file, BEFORE copying it to the other folder, And I notice, whenever I am inside a Read-only directory, and trying to access the "last_write_time" of a Read-only file, I get the following error message: what(): boost::filesystem::last_write_time: Permission denied: "src/ temp1/methodologies.ppt" In this scenario "temp1" is a Read-only directory, also methodologies.ppt is a Read-only file as well. Does anyone know how to get around this? Is there a way to change the directory/file permission (to write) prior to copying, and then change the permission back again? I need to access the time-stamp before copying the file, because right after I copy the file, the date-stamp will be updated. I would really appreciate some help, please advise, thanks, RB

1 0

[BGL] bundled properties and forward declarations (changes from 1.42 -> 1.46.1 ?)
by Anders Wallin 10 Aug '11

10 Aug '11

I have code using bundled properties roughly like this that compiles with boost 1.42: struct EdgeProperty; typedef adjacency_list< ... , EdgeProperty , ...> MyGraph; typedef graph_traits<MyGraph>::edge_descriptor Edge; struct EdgeProperty { Edge next; }; When trying to compile this with boost 1.46.1 I get "error: forward declaration of EdgeProperty’". I am not sure why. The obvious solution would be to move the definition of EdgeProperty before the MyGraph typedef, but then I run into a circular dependency problem as I want to store an edge_descriptor in EdgeProperty. any ideas? Anders

2 3

[bimap] Problem with finding elements in a vector_of
by Teto 10 Aug '11

10 Aug '11

Hi, I've a peculiar bimap defined as such: bbi::bimap< bbi::unordered_set_of< TFullId>, bbi::vector_of<CBindDescriptor>> And I want to find all the TFullId matching a certain CBindDescriptor. but I can't succeed in compiling. Here are 10 lines of code: http://boost.codepad.org/99V38S9U Thx for any hint matt

2 3

[BGL] resize/reserve on graph?
by Geoff Hilton 10 Aug '11

10 Aug '11

If I know that during the execution of the algorithm the graph size must be grown by X number of vertices in one go, is there a way this can be done to avoid multiple allocations such as when using std::vector's reserve(..) or resize(..) member functions without subverting the BGL's documented interface? Currently I use a for loop which iterates over add_vertex(vertex_property, graph). Can a reserve and/or resize equivalent otherwise please be added somewhere? Thank you, Geoff

3 6

installing boost_1_47_0
by rudy b 10 Aug '11

10 Aug '11

Hi, I am newb in using boost. And, I am having so much trouble installing and running a simple example. I would REALLY appreciate some help. I tried to install boost_1_47_0.tar.gz on my unix machine, and I followed the stpes http://www.boost.org/doc/libs/1_47_0/more/getting_started/unix-variants.html to first build, and install the libraries. I had no problem running some the examples (provided on the link above, that was using some of its already built libraries), and they all worked. The problem is when I try to run an example that is using a boost_filesystem. I tried uninstalling/installing different boost versions, cause I thought the error may be version dependent, but it wasn't. I also tried to built the entire library using different versions of gcc (3.4.6, 4.3.5, 4.4.0, 4.5.0, 4.5.1, 4.5.2, 4.6.0), and I get the same error messages. I even made sure that when compile, I have the boost_1_4x_0 path in my compile script. I also made sure that I have appended boost_1_4x_0 path to my $path. I even tried to have -lboost_filesystem in my compile script, but this didn't help either !!! This is the type of error that I am getting: /tmp/cczDoDOU.o: In function `__static_initialization_and_destruction_0(int, int)': sync.cpp:(.text+0xe03): undefined reference to `boost::system::generic_category()' sync.cpp:(.text+0xe1e): undefined reference to `boost::system::generic_category()' sync.cpp:(.text+0xe39): undefined reference to `boost::system::system_category()' /tmp/cczDoDOU.o: In function `boost::filesystem3::last_write_time(boost::filesystem3::path const&, long)': And, when I change the version of compiler, I get something like: /tmp/ccw1Sepi.s: Assembler messages: /tmp/ccw1Sepi.s:408: Error: unknown pseudo-op: `.cfi_personality' /tmp/ccw1Sepi.s:409: Error: unknown pseudo-op: `.cfi_lsda' /tmp/ccw1Sepi.s:531: Error: unknown pseudo-op: `.cfi_personality' /tmp/ccw1Sepi.s:532: Error: unknown pseudo-op: `.cfi_lsda' /tmp/ccw1Sepi.s:722: Error: unknown pseudo-op: `.cfi_personality' /tmp/ccw1Sepi.s:723: Error: unknown pseudo-op: `.cfi_lsda' /tmp/ccw1Sepi.s:1046: Error: unknown pseudo-op: `.cfi_personality' Please advise, thanks, RB

3 3

Program_Options - Is there anyway to get the name of executable?
by asif saeed 10 Aug '11

10 Aug '11

Hi, Is it possible to get name of the executable that started the program using program_options? Thanks in advance, Asif

3 2

More problems with boost::asio and async_read
by Allan Nielsen 10 Aug '11

10 Aug '11

Hi I posted on this a couple of hours ago with some problems. It turned out that some of the problems I had might have been due to buggy hardware. But there is still some thing I do not understand... So, now I have reproduced some of of the problems I have with out any hardware (except from a PC). Basically I'm trying to read from a input source (in this case stdin) with a timeout. Due to the design of the existing application where this have to fit is it not possible to call run on my io_service. Here is my try so far: #include <boost/asio.hpp> #include <boost/bind.hpp> #include <boost/optional.hpp> using namespace std; void set_result( boost::optional<boost::system::error_code> * a, boost::system::error_code b ) { if( b == 0) a->reset( b ); } void receive(boost::asio::io_service & io, boost::asio::posix::stream_descriptor & stream, boost::asio::streambuf & result){ boost::optional<boost::system::error_code> timer_result; boost::optional<boost::system::error_code> read_result; boost::asio::deadline_timer timer( io ); timer.expires_from_now( boost::posix_time::milliseconds(5000) ); // allow up to 50ms of timeout for every char timer.async_wait( boost::bind(&set_result, &timer_result, _1) ); boost::asio::async_read( stream, result, boost::asio::transfer_at_least(1), boost::bind( &set_result, &read_result, _1 )); boost::system::error_code ec; while(1) { io.reset(); io.poll_one(ec); if ( read_result ) { timer.cancel(); return; } else if ( timer_result ) throw std::runtime_error("timeout"); } } void receive(boost::asio::io_service & io, boost::asio::posix::stream_descriptor & stream, size_t size, boost::asio::streambuf & result){ while( result.size() < size ) receive(io, stream, result); } int main(int argc, const char *argv[]) { boost::asio::io_service io; boost::asio::posix::stream_descriptor in(io, ::dup(STDIN_FILENO)); for(int i = 0; i < 5; i++){ std::cout < "; std::cout.flush(); try { boost::asio::streambuf buf; receive(io, in, 5, buf); std::cout << "out> "; std::copy(boost::asio::buffer_cast<const char *>(buf.data()), boost::asio::buffer_cast<const char *>(buf.data()) + buf.size(), ostream_iterator<char>(std::cout)); } catch (const std::exception & e) { std::cout << e.what() << endl; } } return 0; } At my first look, I thought that it was working, but after playing more around with the test app, I got some segmentations faults. I found that something bad happens if I wait for the first query to timeout, and then enter 5 chars the next. Here is what valgrind says: ==17848== Memcheck, a memory error detector ==17848== Copyright (C) 2002-2010, and GNU GPL'd, by Julian Seward et al. ==17848== Using Valgrind-3.6.1 and LibVEX; rerun with -h for copyright info ==17848== Command: ./ccTalkScan ==17848== ==17848== 0 Type in 4 chareters and press enter in> ==17848== Invalid read of size 8 ==17848== at 0x546EB4A: ??? (setcontext.S:60) ==17848== by 0x425847: receive(boost::asio::io_service&, boost::asio::posix::basic_stream_descriptor<boost::asio::posix::stream_descriptor_service>&, unsigned long, boost::asio::basic_streambuf<std::allocator<char> >&) (ccTalkScan.cxx:3 20) ==17848== by 0x425982: main (ccTalkScan.cxx:334) ==17848== Address 0x7feffdf68 is not stack'd, malloc'd or (recently) free'd ==17848== ==17848== Invalid read of size 8 ==17848== at 0x546EB52: ??? (setcontext.S:63) ==17848== by 0x425847: receive(boost::asio::io_service&, boost::asio::posix::basic_stream_descriptor<boost::asio::posix::stream_descriptor_service>&, unsigned long, boost::asio::basic_streambuf<std::allocator<char> >&) (ccTalkScan.cxx:3 20) ==17848== by 0x425982: main (ccTalkScan.cxx:334) ==17848== Address 0x7feffdf58 is not stack'd, malloc'd or (recently) free'd ==17848== ==17848== Invalid read of size 8 ==17848== at 0x546EB59: ??? (setcontext.S:64) ==17848== by 0x425847: receive(boost::asio::io_service&, boost::asio::posix::basic_stream_descriptor<boost::asio::posix::stream_descriptor_service>&, unsigned long, boost::asio::basic_streambuf<std::allocator<char> >&) (ccTalkScan.cxx:320) ==17848== by 0x425982: main (ccTalkScan.cxx:334) ==17848== Address 0x7feffdf28 is not stack'd, malloc'd or (recently) free'd ==17848== ==17848== Invalid read of size 8 ==17848== at 0x546EB4A: ??? (setcontext.S:60) ==17848== by 0x5E4BD2C: (below main) (in /lib64/libc-2.12.2.so) ==17848== Address 0x7feffdfd8 is not stack'd, malloc'd or (recently) free'd ==17848== ==17848== Invalid read of size 8 ==17848== at 0x546EB52: ??? (setcontext.S:63) ==17848== by 0x5E4BD2C: (below main) (in /lib64/libc-2.12.2.so) ==17848== Address 0x7feffdfc8 is not stack'd, malloc'd or (recently) free'd ==17848== ==17848== Invalid read of size 8 ==17848== at 0x546EB59: ??? (setcontext.S:64) ==17848== by 0x5E4BD2C: (below main) (in /lib64/libc-2.12.2.so) ==17848== Address 0x7feffdf98 is not stack'd, malloc'd or (recently) free'd ==17848== timeout 1 Type in 4 chareters and press enter in> asdf ==17848== Syscall param readv(vector[...]) points to unaddressable byte(s) ==17848== at 0x5EF7A81: readv (in /lib64/libc-2.12.2.so) ==17848== by 0x42AF1C: boost::asio::detail::descriptor_ops::non_blocking_read(int, iovec*, unsigned long, boost::system::error_code&, unsigned long&) (descriptor_ops.ipp:153) ==17848== by 0x4360BF: boost::asio::detail::descriptor_read_op_base<boost::asio::mutable_buffers_1>::do_perform(boost::asio::detail::reactor_op*) (descriptor_read_op.hpp:55) ==17848== by 0x427CE4: boost::asio::detail::reactor_op::perform() (reactor_op.hpp:40) ==17848== by 0x429003: boost::asio::detail::epoll_reactor::run(bool, boost::asio::detail::op_queue<boost::asio::detail::task_io_service_operation>&) (epoll_reactor.ipp:286) ==17848== by 0x429C81: boost::asio::detail::task_io_service::do_one(boost::asio::detail::scoped_lock<boost::asio::detail::posix_mutex>&, boost::asio::detail::task_io_service::idle_thread_info*) (task_io_service.ipp:264) ==17848== by 0x42986F: boost::asio::detail::task_io_service::poll_one(boost::system::error_code&) (task_io_service.ipp:188) ==17848== by 0x42A0C2: boost::asio::io_service::poll_one(boost::system::error_code&) (io_service.ipp:103) ==17848== by 0x4255E1: receive(boost::asio::io_service&, boost::asio::posix::basic_stream_descriptor<boost::asio::posix::stream_descriptor_service>&, boost::asio::basic_streambuf<std::allocator<char> >&) (ccTalkScan.cxx:307) ==17848== by 0x425847: receive(boost::asio::io_service&, boost::asio::posix::basic_stream_descriptor<boost::asio::posix::stream_descriptor_service>&, unsigned long, boost::asio::basic_streambuf<std::allocator<char> >&) (ccTalkScan.cxx:320) ==17848== by 0x425982: main (ccTalkScan.cxx:334) ==17848== Address 0x65ba4f0 is 0 bytes inside a block of size 512 free'd ==17848== at 0x4C25C4F: operator delete(void*) (vg_replace_malloc.c:387) ==17848== by 0x432D07: __gnu_cxx::new_allocator<char>::deallocate(char*, unsigned long) (new_allocator.h:95) ==17848== by 0x4316BF: std::_Vector_base<char, std::allocator<char> >::_M_deallocate(char*, unsigned long) (stl_vector.h:146) ==17848== by 0x42FD64: std::_Vector_base<char, std::allocator<char> >::~_Vector_base() (stl_vector.h:132) ==17848== by 0x42D6A4: std::vector<char, std::allocator<char> >::~vector() (stl_vector.h:313) ==17848== by 0x42B657: boost::asio::basic_streambuf<std::allocator<char> >::~basic_streambuf() (basic_streambuf.hpp:114) ==17848== by 0x425A77: main (ccTalkScan.cxx:336) ==17848== out> 2 Type in 4 chareters and press enter in> timeout 3 Type in 4 chareters and press enter in> timeout 4 Type in 4 chareters and press enter in> timeout ==17848== ==17848== HEAP SUMMARY: ==17848== in use at exit: 168 bytes in 3 blocks ==17848== total heap usage: 65 allocs, 62 frees, 22,246 bytes allocated ==17848== ==17848== LEAK SUMMARY: ==17848== definitely lost: 0 bytes in 0 blocks ==17848== indirectly lost: 0 bytes in 0 blocks ==17848== possibly lost: 0 bytes in 0 blocks ==17848== still reachable: 168 bytes in 3 blocks ==17848== suppressed: 0 bytes in 0 blocks ==17848== Rerun with --leak-check=full to see details of leaked memory ==17848== ==17848== For counts of detected and suppressed errors, rerun with: -v ==17848== Use --track-origins=yes to see where uninitialised values come from ==17848== ERROR SUMMARY: 27 errors from 9 contexts (suppressed: 4 from 4) I have tried different things to fix, but I that I might have mis understood a thing or two here. So some help would be most appreciated. -- Allan W. Nielsen

2 8

unlocatable infinite loop when using boost::serialization
by Griffin Howlett 10 Aug '11

10 Aug '11

Ok so i've set up boost::serialization to work with objects whose constructor and destructors are private (forcing you to make them through "factories"), but after doing the coming steps, the << operator of a boost::oarchive never returns. I've followed what was happening exactly in a debugger, but don't know what's happening *after the ending brackets of the object's serialization function. It's not even reaching the overloaded destroy function*. I think it's some internal business. - To do this i've overided the `load/save_construct_data function` and the `access::destroy template function` with the appropriate parameters. - I also defined a serialization function for each factory-built object, but it doesn't do anything as to force you to pass a pointer instead. - You'll also notice i've added my own Save() function as so the user can specify a different factory to use for recreating (loading) the object back up if needed. **Why would this be happening and how do i fix it?** here's the source: oa << WallBody2; //this is the call in main, wallBody2 is a b2Body* template<> static void access::destroy( const b2Body * t) // const appropriate here? { // the const business is an MSVC 6.0 hack that should be // benign on everything else const_cast<b2Body*>(t)->GetWorld()->DestroyBody(const_cast<b2Body*>(t)); } template<> static void access::destroy( const b2Fixture * t) // const appropriate here? { // the const business is an MSVC 6.0 hack that should be // benign on everything else const_cast<b2Fixture*>(t)->GetBody()->DestroyFixture(const_cast<b2Fixture*>(t)); } template<class Archive> inline void save_construct_data( Archive & ar, const b2Body * t, const unsigned int file_version) { // save data required to construct instance b2World* WorldPtr= const_cast<b2Body*>(t)->GetWorld(); ar & WorldPtr; Save(ar, const_cast<b2Body*>(t), file_version); } template<class Archive> inline void save_construct_data( Archive & ar, const b2Fixture * t, const unsigned int file_version) { // save data required to construct instance b2Body* BodyPtr= const_cast<b2Fixture*>(t)->GetBody(); ar & BodyPtr; Save(ar, const_cast<b2Fixture*>(t), file_version); } template<class Archive> void serialize(Archive & ar, b2Fixture& b2, const unsigned int version) { std::cout << "b2Fixture is not serializable, only b2Fixture pointers are" << std::endl;}; template<class Archive> void serialize(Archive & ar, b2Body& b2, const unsigned int version) { std::cout << "b2Fixture is not serializable, only b2Fixture pointers are" << std::endl;}; template<class Archive> void Save(Archive & ar, b2Body* b2, const unsigned int version) { b2World* World = b2->GetWorld(); ar & World; b2BodyDef InitialBodyDef; InitialBodyDef.inertiaScale= b2->GetInertia(); // QUESTION: Is there any way to get/set this from a body (not def) ar & InitialBodyDef; // QUESTION: wtf is inertiaScale? any relation to MassData? b2BodyDef BodyDef; BodyDef.angle= b2->GetAngle(); BodyDef.position= b2->GetPosition(); BodyDef.active= b2->IsActive(); BodyDef.angularDamping= b2->GetAngularDamping(); BodyDef.angularVelocity= b2->GetAngularVelocity(); BodyDef.awake= b2->IsAwake(); BodyDef.bullet= b2->IsBullet(); BodyDef.fixedRotation= b2->IsFixedRotation(); BodyDef.linearDamping= b2->GetLinearDamping(); BodyDef.linearVelocity= b2->GetLinearVelocity(); BodyDef.type= b2->GetType(); BodyDef.userData= b2->GetUserData(); ar & BodyDef; // number of fixtures saved first so when loaded we know // how many fixturedefs to extract unsigned int numbFixtures=0; for (b2Fixture* fixture = b2->GetFixtureList(); fixture; fixture = fixture->GetNext()) numbFixtures++; ar & numbFixtures; //TODO: find out if boost will detect this as a list for (b2Fixture* fixture = b2->GetFixtureList(); fixture; fixture = fixture->GetNext()) ar & fixture; } template<class Archive> void Save(Archive & ar, b2Fixture* b2, const unsigned int version) { b2Body* Body = b2->GetBody(); ar & Body; //Registered so boost can differentiate types of "shapes" ar.register_type(static_cast<b2CircleShape *>(NULL)); ar.register_type(static_cast<b2PolygonShape *>(NULL)); b2Shape* Shape= b2->GetShape(); ar & Shape; b2FixtureDef FixtureDef; FixtureDef.density= b2->GetDensity(); FixtureDef.filter= b2->GetFilterData(); FixtureDef.friction= b2->GetFriction(); FixtureDef.isSensor= b2->IsSensor(); FixtureDef.restitution= b2->GetRestitution(); FixtureDef.userData= b2->GetUserData(); ar & FixtureDef; }

1 0

Boost system library error
by Abbas Banaiyan 10 Aug '11

10 Aug '11

Hi, I installed Boost 1.4.47 on a Linux x86_64 server with gcc 4.4.4. When I try to make a simulator which uses Boost libraries I get the following error message: /home/abanaiya/local//include/boost/system/error_code.hpp:316: note: candidates are: boost::system::error_code::error_code(int&, const boost::system::error_category&) /home/abanaiya/local//include/boost/system/error_code.hpp:315: note: boost::system::error_code::error_code() /home/abanaiya/local//include/boost/system/error_code.hpp:311: note: boost::system::error_code::error_code(const boost::system::error_code&) ../../src/boost.task-0.4.2/boost/task/detail/bind_processor_linux.hpp: In function âvoid boost::this_thread::bind_to_processor(unsigned int)â: ../../src/boost.task-0.4.2/boost/task/detail/bind_processor_linux.hpp:41: error: no matching function for call to âboost::system::error_code::error_code(int&, const boost::system::error_category& (&)())â /home/abanaiya/local//include/boost/system/error_code.hpp:316: note: candidates are: boost::system::error_code::error_code(int&, const boost::system::error_category&) /home/abanaiya/local//include/boost/system/error_code.hpp:315: note: boost::system::error_code::error_code() /home/abanaiya/local//include/boost/system/error_code.hpp:311: note: boost::system::error_code::error_code(const boost::system::error_code&) ../../src/boost.task-0.4.2/boost/task/detail/bind_processor_linux.hpp: In function âvoid boost::this_thread::bind_to_any_processor()â: ../../src/boost.task-0.4.2/boost/task/detail/bind_processor_linux.hpp:59: error: no matching function for call to âboost::system::error_code::error_code(int&, const boost::system::error_category& (&)())â /home/abanaiya/local//include/boost/system/error_code.hpp:316: note: candidates are: boost::system::error_code::error_code(int&, const boost::system::error_category&) /home/abanaiya/local//include/boost/system/error_code.hpp:315: note: boost::system::error_code::error_code() /home/abanaiya/local//include/boost/system/error_code.hpp:311: note: boost::system::error_code::error_code(const boost::system::error_code&) /home/abanaiya/local//include/boost/system/error_code.hpp: At global scope: /home/abanaiya/local//include/boost/system/error_code.hpp:214: warning: âboost::system::posix_categoryâ defined but not used /home/abanaiya/local//include/boost/system/error_code.hpp:215: warning: âboost::system::errno_ecatâ defined but not used /home/abanaiya/local//include/boost/system/error_code.hpp:216: warning: âboost::system::native_ecatâ defined but not used make[2]: *** [sim.o] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all-recursive] Error 1 I also received the following error that I removed it by disabling the corresponded line at api_config.hpp file. /home/abanaiya/local//include/boost/system/api_config.hpp:28:5: error: #error user defined BOOST_POSIX_API or BOOST_WINDOWS_API not supported I also tried version 1.4.42 and got the same error. Would you please let me know hot to resolve it. I run the following command to install the Boost: ./bjam --prefix=$HOME/local install Thanks, Abbas

1 0

Public Encryption with ASIO SSL
by David McCallum 09 Aug '11

09 Aug '11

I'm trying to create a system where clients can encrypt messages, but only the server can decrypt them. I'm configuring the context on the server-side like so: context_.set_options(boost::asio::ssl::context::default_workarounds | boost::asio::ssl::context::no_sslv2); context_.set_password_callback(boost::bind(&server::get_password, this)); context_.use_private_key_file("server.pem", boost::asio::ssl::context::pem); However, I can't find any way to load the public key on the clients. Can I create a connection that relies on public-key encryption? Or do the SSL classes expect me to use public-key encryption only to generate symmetrical keys, ie with Diffie-Hellman? -David

1 0

Boost::Test Samples?
by Jeffrey Walton 09 Aug '11

09 Aug '11

Hi All, I'm not sure I have chosen the right testing architecture (external runner for a DSO), and I am having problems getting Boost::Test to run properly. I have print statements which are not printing in functions registered with BOOST_TEST_SUITE. And I have spiked a test would should print an error message. I thought it would be a good idea to look at [sample] projects that work rather than code snippets. Unfortunately, the link for "collection of examples" at [1] is broken. Does anyone know where to find Boost::Test samples? Thanks in advance, Jeff [1] http://www.boost.org/doc/libs/1_44_0/libs/test/doc/html/utf/intro.html

5 10

[mpl] Safe to instantiate mpl classes for tag-dispatch-by-instance?
by Gabriel Redner 09 Aug '11

09 Aug '11

Hi all, Say I have a functor which accepts a tag instance: struct tagA {}; struct tagB {}; struct MyFunc { template <typename TTag> void operator()(TTag, int other_stuff) {...} }; In some cases I want to pass multiple tags at once. Is it safe to just instantiate mpl::pair, mpl::vector, etc. and use them for this purpose, since from a runtime perspective they're just empty classes? Or, is this a Bad Idea for some reason? Thanks, -Gabe

1 0

Segmentation fault when using asio and poll_one
by Allan Nielsen 09 Aug '11

09 Aug '11

Hi I'm using Boost 1.46.1 asio for doing serial communication. About 1/1000 times when I run the poll_one I get this segmentation fault: Program received signal SIGSEGV, Segmentation fault. 0x0000000000434a7a in boost::asio::detail::reactor_op::perform (this=0x402010af1010004) at /usr/include/boost-1_46/boost/asio/detail/reactor_op.hpp:40 40 return perform_func_(this); (gdb) bt #0 0x0000000000434a7a in boost::asio::detail::reactor_op::perform (this=0x402010af1010004) at /usr/include/boost-1_46/boost/asio/detail/reactor_op.hpp:40 #1 0x0000000000435da6 in boost::asio::detail::epoll_reactor::run (this=0x6625c0, block=false, ops=...) at /usr/include/boost-1_46/boost/asio/detail/impl/epoll_reactor.ipp:286 #2 0x0000000000436a24 in boost::asio::detail::task_io_service::do_one (this=0x6624e0, lock=..., this_idle_thread=0x0) at /usr/include/boost-1_46/boost/asio/detail/impl/task_io_service.ipp:264 #3 0x0000000000436612 in boost::asio::detail::task_io_service::poll_one (this=0x6624e0, ec=...) at /usr/include/boost-1_46/boost/asio/detail/impl/task_io_service.ipp:188 #4 0x0000000000436e65 in boost::asio::io_service::poll_one (this=0x7fffffffe240, ec=...) at /usr/include/boost-1_46/boost/asio/impl/io_service.ipp:103 #5 0x000000000043b69b in CcTalkPort::receive (this=0x7fffffffe240) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:382 #6 0x000000000043b7dc in CcTalkPort::receive (this=0x7fffffffe240, size=5) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:396 #7 0x000000000043bcb5 in CcTalkPort::_ask (this=0x7fffffffe240, req=...) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:411 #8 0x000000000043ac6e in CcTalkPort::ask (this=0x7fffffffe240, req=...) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:317 #9 0x000000000043daef in CcTalkDevice::ask_hex (this=0x7fffffffe300, v=..., m=..., s=...) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:583 #10 0x000000000043ce69 in CcTalkDevice::request_software_revision (this=0x7fffffffe300) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:507 #11 0x000000000043c57f in CcTalkDevice::coreInfo (this=0x7fffffffe300) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:459 #12 0x00000000004325ff in main (argc=1, argv=0x7fffffffe528) at /home/awn/git/gamblify/hardware/gmbio/software/test/ccTalkScan.cxx:820 Here is the snippet where I call it: while(1) { io_service.reset(); io_service.poll_one(ec); if ( read_result ) { timer.cancel(); return; } else if ( timer_result ) { throw CcTalkTimeOutException(); } } Any hints on how to debug this? -- Allan W. Nielsen

2 1

Working around the restriction in enable_shared_from_this
by kelvSYC 09 Aug '11

09 Aug '11

Suppose I have a class called Group, extending boost::enable_shared_from_this<Group>. Now suppose I have something like this: class Foo { boost::shared_ptr<const Group> G; public: Foo(const Group& G_) : G(G_.shared_from_this()) {} }; This would totally barf if, among other things, G_ was allocated from the stack, say, since I don't have an owning shared_ptr instance. So, it would appear that, at the very least, if you were to allocate a Group on the stack, then you would need a shared_ptr with a null deleter to make use of Foo. This seems inconvenient to whoever may want to use Foo, so is there a way to change this so get around the shared_ptr instance restriction without changing Foo?

1 0

path filesystem
by rudy 09 Aug '11

09 Aug '11

Hi, This is my first post, so please advise me if this is not the correct place to post my question. This is my question: I have the following directory pattern (Dir1 is the parent directory, and the rest are the child files/subdirectories): Dir1 file1 file2 .file3 subdir1 .subdir2 the following code will go through the Dir1, and it will fail in creating the "path" when it reaches ".file3" or ".subdir2" boost::filesystem:ath dir1_path(filepath.c_str()); How should I create a path to a directory that (for example) has the following path? /root/my_docs/pgg/.file1 filesystem::path works just fine if I had to deal with (/root/my_docs/pgg/file1) instead of (/root/my_docs/pgg/.file1) !!! apparently when the file/directory starts with '.', I cannot get filesystem::path to behave properly. please advise, thanks, Rudy

1 0

Boost.Program_options: Parsing arguments like "+a" possible?
by boost_mailinglist＠gmx.de 09 Aug '11

09 Aug '11

Hello, is it possible to parse also arguments like "+a" with the library "Boost.Program_options"? The numbers of arguments are simple to much to use only the "-" or the "--" as a sign for arguments. If it possible, how have I to activate this function? Thank you. -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de

4 11

[asio] user defined composed operations and strands
by Tacheon 09 Aug '11

09 Aug '11

Hello, I am trying to implement some new composed operations (like boost::asio::async_read) with asio. However I am a bit concerned about thread-safety when the run-method of the used io_service object ist called from multiple threads and there are parallel read- and write operations on the same socket. The composed operations look like this: class io_port { public: //Ctors and so on... typedef boost::function<void (error_t const &)> completion_handler_t; void async_read_data ( raw_buffer_t & buffer , completion_handler_t const & handler) { //uses a composed operation itself... boost::asio::async_read ( socket , boost::asio::buffer(header) , boost::bind ( &io_port::handle_header_received , this , boost::ref(buffer) , handler , boost::asio::placeholders::error) ); } //first intermediate handler void handle_header_received ( raw_buffer_t & data , completion_handler_type const & handler , boost::system::error_code const & error { if(error) { handler(error_t(error)); } else { prepare_buffer(data, header.perparation_data()); //pseudo-code //uses a composed operation itself... boost::asio::async_read ( socket , boost::asio::buffer(data) , boost::bind ( &io_port::handle_data_received , this , boost::ref(buffer) , handler , boost::asio::placeholders::error) ); } } //second intermediate handler void handle_data_received ( raw_buffer_t & data , completion_handler_type const & handler , boost::system::error_code const & error ) { if(error) { handler(error_t(error)); } else { handler(error_t()); } } void async_write_data ( raw_buffer_t const & buffer , completion_handler_t const & handler) { ... } //quite similar to async_read_data }; usage may be either port.async_read ( buffer , handler ); or port.async_read ( buffer , strand.wrap(handler) ); //how to forward this to asio::async_read? If async_write_data is called and io_service::run is called from multiple threads, strands are should be necessary to avoid raced. The question is: How do I support handlers wrapped in a strand and how do I get this strand forwarded to async_read? As far as I understand this should be somehow possible by using asio_handler_invoke but the documentation is a bit too fuzzy on the topic for me to understand. -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de

1 0

Re: [Boost-users] Enums to/from Strings
by Benjamin van den Hout 09 Aug '11

09 Aug '11

Hi John, > For the time being, I've made a function called to_string, which seems to be a common > choice. But what's the best way to make it automatically known to those other features? It's not the most pretty solution, but perhaps you could resort to the Boost Preprocessor library to generate both the enum and the 'toString' method for you. Some sample code can be found here on my blog: http://www.smork.info/blog/index.php?entry=entry110809-105615 Kind regards, Benjamin van den Hout

1 0

Re: [Boost-users] [fusion] adapt std::tuple to be a fusion sequence?
by "Claas H. Köhler" 09 Aug '11

09 Aug '11

I was wondering about the status of the above topic: Does a boost implementation of an adaptor exist or is Sebastian's suggestion the best alternative currently available? His solution did not work out of the box for me, since g++-4.6 complained about an "incomplete type std::tuple_size<const std::tuple<..." However, when I replaced each occurence of std::tuple_size<X> by std::tuple_size< typename std::remove_cv<X>::type > everything seemed to work fine. Regards Claas > No docs. Also, this is just for the MSVC 10 (no-variadics) > >implementation. It was just something I hacked up quickly because I > >needed it for something internal. > > >Anyway, here it is. > > >Sebastian

2 1

Boost::Test and streams
by Jeffrey Walton 09 Aug '11

09 Aug '11

Hi All, I'm working form http://www.boost.org/doc/libs/1_47_0/libs/test/doc/html/index.html. I can't seem to find Boost::Test's streams. The discussion of streams begins at [1]. [1] does list macros such as BOOST_TEST_DONT_PRINT_LOG_VALUE, but I'm interested in a C++-centric solution. For example: // test framework output stream using boost_test::tout; tout << loglevel::error << "My error message" << endl; tout << loglevel::warn << "My warning message" << endl; According to [2], I can set the log level from the environment and from the command line. But would like to set it dynamically. For example: tout << setlevel(warn); // warnings and above or tout.setlelvel(error); // errors and above In addition, I would like to be able to tie a file output to screen output, so I can watch the tests roll by and go to the log file for in depth reading. To be fair, redirection is covered at [3], but its not quite what we are looking for. For example: ofstream logfile(...); ... tout.attach(logfile); or tout.tie(logfile); Though the authors did a great job on the documentation, these topics do not appear to be included. Any ideas how one might go about these sorts of things? Thanks in advance, Jeffrey Walton [1] http://www.boost.org/doc/libs/1_47_0/libs/test/doc/html/utf/user-guide/test… [2] http://www.boost.org/doc/libs/1_47_0/libs/test/doc/html/utf/user-guide/runt… [3] http://www.boost.org/doc/libs/1_47_0/libs/test/doc/html/utf/user-guide/test…

2 1

[boost.asio 1.47] : changing host time
by Mathieu Peyréga 08 Aug '11

08 Aug '11

Hello, I would like to know if there are any implications with the fact of having a call to settimeofday in order to change the system time while using boost asio (asynchronous timers). The point of calling settimeofday (software is running on a linux box with super user privileges) is to synchronize the system clock with a GPS receiver clock at some point while the io service is already running. Best regards, Mathieu Peyréga

2 3

Re: [Boost-users] Asio problems with async_read
by Alex Perry 08 Aug '11

08 Aug '11

Allan Nielsen wrote on Mon, 8 Aug 2011 14:13:08 +0200 > Hi > > I have a funciton where we I am using boost::asio to read from the > serial port of my computer. > > I have started out with an implementation which uses read, and I am > now trying to convert it to async_read because I want a time out. > > When I am trying to use the async_read version, I get timeouts after I > have read one or two charterers, even though I know there are more > charterers to be read on the wire. > Not sure that this is much help since I've never really used boost.asio and reading further down the thread it may be a problem with how you are calling it. However having done a lot of serial comms in the past seeing a couple of characters only whilst more data is on the wire I'd guess that the timeout is as a result of the low level serial hardware interrupt. The UART is probably signalling that its internal FIFO buffer is full and you need to read this promptly - quite how that all pans out and what daemon / service has the responsibility of reading this these days I haven't got the faintest - I was writing TSR's when I knew the gory technical details of this so life was much simpler. I'm actually impressed that you've found a computer that still has a serial port on it! Most seem to have gone over to the ubiquitous USB these days - though that may be the easiest solution - use USB and a usb/serial converter which would avoid having to rediscover the lost art of programming UART latch timings etc and give you a decent amount of low level buffering so you could ignore low level stuff and just read the data. http://www.bb-europe.com/tech_articles/USB_converters.asp?gclid=CPvOgur5v6o… or some such. HTH Alex

2 1

Asio problems with async_read
by Allan Nielsen 08 Aug '11

08 Aug '11

Hi I have a funciton where we I am using boost::asio to read from the serial port of my computer. I have started out with an implementation which uses read, and I am now trying to convert it to async_read because I want a time out. When I am trying to use the async_read version, I get timeouts after I have read one or two charterers, even though I know there are more charterers to be read on the wire. Here is the code: void set_result( boost::optional<boost::system::error_code> * a, boost::system::error_code b ) { a->reset( b ); } std::vector<uint8_t> receive(boost::asio::io_service & io, boost::asio::serial_port & cctalk_port){ #if 0 boost::optional<boost::system::error_code> timer_result; boost::optional<boost::system::error_code> read_result; boost::asio::deadline_timer timer( io ); timer.expires_from_now( boost::posix_time::milliseconds(5000) ); timer.async_wait( boost::bind(&set_result, &timer_result, _1) ); boost::asio::streambuf result; boost::asio::async_read( cctalk_port, result, boost::asio::transfer_at_least(1), boost::bind( &set_result, &read_result, _1 )); while(1) { io.poll_one(); if ( read_result ) { timer.cancel(); std::vector<uint8_t> res(boost::asio::buffer_cast<const uint8_t * >(result.data()), boost::asio::buffer_cast<const uint8_t * >(result.data()) + result.size() ); return res; } else if ( timer_result ) { throw runtime_error("timeout"); } } throw runtime_error("Should not happend"); #else uint8_t c; boost::asio::read(cctalk_port, boost::asio::buffer(&c, 1)); std::vector<uint8_t> res; res.push_back(c); return res; #endif }

2 4

need help on compile error about gregorian and regex
by Eric Lin 08 Aug '11

08 Aug '11

Dear Boost experts: when I compile a program(some example code from c++ book) it contain #include <boost/date_time/gregorian/gregorian.hpp> #include <boost/regex.hpp> and I got a lot compile error related about it on my g++ with boost 1.46.1 installed ------- ------- ----------------------------------------------------------------------------------------------------- eric@eric-laptop:~/cppcookbook/download/TESTDIR$ g++ -ltinyxml 14-3.cpp /tmp/cct65iz6.o: In function `unsigned short boost::date_time::month_str_to_ushort<boost::gregorian::greg_month>(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)': 14-3.cpp:(.text._ZN5boost9date_time19month_str_to_ushortINS_9gregorian10greg_monthEEEtRKSs[unsigned short boost::date_time::month_str_to_ushort<boost::gregorian::greg_month>(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)]+0x97): undefined reference to `boost::gregorian::greg_month::get_month_map_ptr()' /tmp/cct65iz6.o: In function `bool boost::regex_match<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<boost::sub_match<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >, char, boost::regex_traits<char, boost::cpp_regex_traits<char> > >(__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, __gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, boost::match_results<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<boost::sub_match<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > > >&, boost::basic_regex<char, boost::regex_traits<char, boost::cpp_regex_traits<char> > > const&, boost::regex_constants::_match_flags)': 14-3.cpp:(.text._ZN5boost11regex_matchIN9__gnu_cxx17__normal_iteratorIPKcSsEESaINS_9sub_matchIS5_EEEcNS_12regex_traitsIcNS_16cpp_regex_traitsIcEEEEEEbT_SD_RNS_13match_resultsISD_T0_EERKNS_11basic_regexIT1_T2_EENS_15regex_constants12_match_flagsE[bool boost::regex_match<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<boost::sub_match<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >, char, boost::regex_traits<char, boost::cpp_regex_traits<char> > >(__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, __gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, boost::match_results<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<boost::sub_match<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > > >&, boost::basic_regex<char, boost::regex_traits<char, boost::cpp_regex_traits<char> > > const&, boost::regex_constants::_match_flags)]+0x4c): undefined reference to `boost::re_detail::perl_matcher<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<boost::sub_match<__gnu_cxx::__normal_iterator<char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >, boost::regex_traits<char, boost::cpp_regex_traits<char> > >::match()' /tmp/cct65iz6.o: In function `boost::basic_regex<char, boost::regex_traits<char, boost::cpp_regex_traits<char> > >::assign(char const*, char const*, unsigned int)': ------------------------------------------------------------------------------------------This is only front part of the whole errors------------------- these code is claimed worked on msvc++7.1 on window xp and you can download it from http://examples.oreilly.com/9780596007614/ 14-1.xml 14-2.h 14-3.cpp to test by yourself plz help and thanks a lot in advance, Eric(on g++ 4.5.2, linuxkernel 2.6.38-10)

2 1

boost.preprocessor BOOST_PP_SEQ_FOR_EACH shows strange error messages
by aliko 07 Aug '11

07 Aug '11

Hi! I'm trying to utilize preprocessor library for the first time and my questions probably are too stupid for this list but I have not found another place to ask.:) In series of projects I have a repetitive task with defining many variables and structures based on configuration of embedded platform. First I've tried to generate array of numbers from ADC, the main definition from which all the variables and structures should be created. But I've got a strange error messages which I can't interpret right way. My code is: ********************************************************************** #include <boost/preprocessor/seq.hpp> #include <boost/preprocessor/tuple.hpp> #define POS_NAME 0 #define POS_PIN 1 #define POS_SKIP 2 #define POS_K 3 #define POS_TYPES 4 #define POS_SCALES 5 #define NFIELDS 6 #define NSIGS 5 enum {DISCRETE, ANALOG, CONTROL, MEASURE, END_TYPES}; //NAME, PIN, SKIP, FILTERK, DATATYPES, SCALES #define ADC ( \ (POSITION, 0, 0, 100, (ANALOG, CONTROL, MEASURE), \ (((DISCRETE, ANALOG) (1000, 4000) (0, 20000)) \ ((ANALOG, CONTROL) (4000, 20000) (0, 10000)) \ ((ANALOG, MEASURE) (4000, 20000) (0, 3000)))), \ (CURRENT, 1, 0, 100, (ANALOG, CONTROL), \ (((DISCRETE, ANALOG) (1000, 4000) (0, 20000)) \ ((ANALOG, CONTROL) (4000, 20000) (0, 10000)))), \ (HALL, 2, 0, 100, (ANALOG, CONTROL), \ (((DISCRETE, ANALOG) (1000, 4000) (0, 20000)) \ ((ANALOG, CONTROL) (4000, 20000) (0, 10000)))), \ (PRESSURE, 4, 0, 100, (ANALOG, CONTROL, MEASURE), \ (((DISCRETE, ANALOG), (1000, 4000) (0, 20000)) \ ((ANALOG, CONTROL) (4000, 20000) (0, 10000)) \ ((ANALOG, MEASURE) (4000, 20000) (0, 3000)))), \ (TEMPERATURE, 10, 0, 100, (CONTROL, MEASURE), \ (((DISCRETE, CONTROL) (1000, 4000) (0, 20000)) \ ((CONTROL, MEASURE) (4000, 20000) (0, 3000)))) \ ) #define WITH_NUMBERS(Z0, Z1, SEQ) BOOST_PP_SEQ_ELEM(1, SEQ), BOOST_PP_SEQ_ELEM(2, SEQ), #define TO_NUMBERS(Z0, Z1, SEQ) BOOST_PP_SEQ_FOR_EACH(WITH_NUMBERS, _, SEQ) #define TO_SCALES(Z0, Z1, TUPLE) BOOST_PP_SEQ_FOR_EACH(TO_NUMBERS, _, BOOST_PP_TUPLE_ELEM(NFIELDS, POS_SCALES, TUPLE)) unsigned int bounds[] = {BOOST_PP_SEQ_FOR_EACH(TO_SCALES, _, BOOST_PP_TUPLE_TO_SEQ(NSIGS, ADC))}; ********************************************************************** The errors are: ./test_preprocess.cpp:56:1: error: ‘TO_NUMBERS’ was not declared in this scope ./test_preprocess.cpp:56:1: error: ‘_’ was not declared in this scope ./test_preprocess.cpp:56:1: error: ‘(0, (._74)1u)’ cannot be used as a function ./test_preprocess.cpp:56:1: error: ‘(0, (._74)2u)’ cannot be used as a function ./test_preprocess.cpp:56:1: error: ‘(0, (._74)3u)’ cannot be used as a function ./test_preprocess.cpp:56:1: error: ‘BOOST_PP_SEQ_FOR_EACH’ was not declared in this scope ... end so on Why it's not sees TO_NUMBERS definition?

3 3

99 Bottles of Beer using Boost MPL, feedback invited
by Alastair Rankine 07 Aug '11

07 Aug '11

So inspired by http://programmingpraxis.com/2011/08/05/ninety-nine-bottles-of-beer/ , I decided to attempt to generate the lyrics to the 99 bottles of beer song. To make it interesting I decided to use Boost MPL to generate the lyrics using template metaprogramming. Here is my attempt. https://gist.github.com/1130306 It compiles with gcc 4.2 against boost 1.47. Given that I am pretty inexperienced with MPL I would very much appreciate some constructive criticism. I'd specifically like to know if the code can be cleaned up to be simpler or to perform better. Also I'm not entirely happy with the duplication in the PrintX functors, would definitely like to get a better approach here. Thanks,

1 0

[Fusion] Is there an assignment function for any two conformant sequences?
by someguy 07 Aug '11

07 Aug '11

Is there a function like "assign(dest_fusion_seq,src_fusion_seq)" which does recursive element-wise assignment between any two conformant fusion sequences(including adapted ones)? I didn't find one but I think there should be such functionality. -- View this message in context: http://boost.2283326.n4.nabble.com/Fusion-Is-there-an-assignment-function-f… Sent from the Boost - Users mailing list archive at Nabble.com.

3 3

[Boost.Serialization] Serializing "abstract" classes
by Júlio Hoffimann 06 Aug '11

06 Aug '11

Dear all, I'm using Boost 1.45... I've read Boost.Serialization docs so many times and can't understand why my testcase is not working as expected. According to the following three links, we need to address serialization of derived classes with "abstract" base class by using boost macros: http://www.boost.org/doc/libs/1_47_0/libs/serialization/doc/traits.html#exp… http://www.boost.org/doc/libs/1_47_0/libs/serialization/doc/special.html#ex… http://www.boost.org/doc/libs/1_47_0/libs/serialization/doc/traits.html#abs… I did my testcase ( http://codepad.org/6ETp1Ac0 ) completely based on the demo: http://www.boost.org/doc/libs/1_47_0/libs/serialization/example/demo.cpp Compiling and running shows that the derived class archive contains just the base class data members. What is happening? How can i solve this problem? I really appreciate any help, Júlio.

2 6

Another baffling error message
by Eric Fowler 06 Aug '11

06 Aug '11

Sorry to have to ask the list for help, but I am once again stumped. Perhaps you will find this easy. I have some classes defined: using namespace std; using namespace boost; class POS{..stuff..} class LEN{...stuff...} typedef adjacency_list<vecS, vecS, undirectedS, POS, LEN> DG; typedef graph_traits<DG>::vertex_descriptor Vertex; typedef graph_traits<DG>::edge_descriptor Edge; class DelaunayGraph: public DG { public: void foo() { Edge e = whatever(); remove_edge(e, *this); // <<<<----THIS BLOWS UP ..stuff... } The error I am getting is: c:\documents and settings\eric\my documents\visual studio 2008\projects\shuttle\delaunay\trunk\delaunaygraph.h(371) : error C2661: 'boost::undirected_graph_helper<Config>::remove_edge' : no overloaded function takes 2 arguments with [ Config=boost::detail::adj_list_gen<boost::adjacency_list<boost::vecS,boost::vecS,boost::undirectedS,POS,LEN>,boost::vecS,boost::vecS,boost::undirectedS,boost::property<boost::vertex_bundle_t,POS>,boost::property<boost::edge_bundle_t,LEN>,boost::no_property,boost::listS>::config ] What am I doing wrong in this instance, and what design principle am I violating? Eric

2 1

datetime will not be parsed
by Kraus Philipp 06 Aug '11

06 Aug '11

Hello, I use this code for parsing a string into a datetime: boost::local_time::local_date_time l_datetime(boost::date_time::not_a_date_time); std::istringstream l_datestream("Sat Aug 06 10:52:26 +0000 2011"); l_datestream.imbue( std::locale( std::locale::classic(), new boost::local_time::local_time_input_facet("%a %b %d %H:%M:%S %q %Y")) ); l_datestream >> l_datetime; But the l_datetime is always set to "not a date time". I think the parameter within the input facet are correct, so I don't understand why the string is not be parsed. Can anyone help me please to create a working solution? Thanks Phil

1 0

question about boost::intrusive_ptr
by Mahmood Naderan 06 Aug '11

06 Aug '11

Hi I used boost::intrusive_ptr in a function, say foo(), like this: boost::intrusive_ptr<BranchFeedback> theFeedback ( new BranchFeedback() ); std::vector< std::vector< BPredState > > theFetchState; .... theFeedback->theBPState = &theFetchState[anIndex][!anOne]; The difinition of BranchFeedback and BPredState are: struct BranchFeedback : boost::counted_base { ... boost::intrusive_ptr<BPredState> theBPState; }; struct BPredState : boost::counted_base { ... uint32_t theGShare; uint32_t theSerial; }; The problem is when foo() reaches the end (I mean '}'), I get segmentation fault which points to ~intrusive_ptr() { if(p_ != 0) intrusive_ptr_release(p_); } I thought I used the intrusive_ptr in a correct way. Is there any consideration that I missed? Thanks, // Naderan *Mahmood;

2 2

is boost 1.46.1 contain thread/read_write_mutex.hpp
by Eric Lin 05 Aug '11

05 Aug '11

dear boost progamers: when I tried to compile from my g++4.5.2 a simple file which include #include <boost/thread/read_write_mutex.hpp> ------- root@eric-laptop:/home/eric/cppcookbook/ch12# g++ -lboost_thread Example12-3.cpp Example12-3.cpp:3:45: fatal error: boost/thread/read_write_mutex.hpp: No such file or directory compilation terminated. --------- and I check from / of my ubuntuLinux with boost 1.46.1 I can not find any file name as read_wirte_mutex.hpp --------- root@eric-laptop:/# find . | grep read_write_mutex.hpp root@eric-laptop:/# --- and I can not digout from web how to make it compile under gcc/g++ plz help, Eric

4 6