July 2009 - Boost-users - lists.preview.boost.org

Help with updating PowerDNS to boost for easier windows compilation
by Todd Nine 25 Jul '09

25 Jul '09

Hi all, I'm in the process of updating the 2.9.22 source of PowerDNS to be a bit more "Windows Friendly" and building it with Visual C++ 8 (2008). However, I'm having some issues I could use a hand with. Specifically, the authors of powerdns define their own following types #ifdef NEED_POSIX_TYPEDEF typedef unsigned char uint8_t; typedef unsigned short int uint16_t; typedef unsigned int uint32_t; typedef unsigned long long uint64_t; #endif These types are used extensively in the code. Rather than prefix each reference with the boost:: namspace, I would like to make boot the standard namespace for these data types. Everything includes the header file with the definition above, is there a way for me to do this? I haven't done C and C++ in 9 years, and even then only on very small projects and small patches, so your help is greatly appreciated. Thanks, todd SENIOR SOFTWARE ENGINEER todd nine | spidertracks ltd | 117a the square po box 5203 | palmerston north 4441 | new zealand P: +64 6 353 3395 | M: +64 210 255 8576 E: todd(a)spidertracks.co.nz W: www.spidertracks.com

2 1

FREE debugger
by Caligula 24 Jul '09

24 Jul '09

Can anyone recommend a FREE debugger to use for boost, under linux. I want to see if I can fix copy_graph to my liking. I'm used to using the gdb debugger, but I think there must be something better. Thanks -Caligula

3 2

UTF-16
by Robert Dailey 24 Jul '09

24 Jul '09

Hi everyone, I did a bit of googling to see if Boost 1.39 as any portable support for UTF-16 encoded strings, but I did not find any. I'm currently using wxWidgets in my application, and I need a decent string object to use. I know that wxWidgets has UTF-16 string support through wxString, however I do not want to expose this object in my interfaces. I want to remain as abstracted away from wxWidgets as possible. Having said that, if someone could tell me if there is any existing UTF-16 string support in Boost, I'd appreciate it. I did not find anything in the vault, sandbox, or trunk in Boost. If boost has no such string object, could someone give me a head start on where to look? Thanks.

9 15

[Signals] Another performance discussion
by Sajjan Kalle 24 Jul '09

24 Jul '09

Hi, I see that there's already been some discussion concerning the performance of the signals library, it's fairly old though so I hope nobody minds me brining it up in a new thread. We use signals fairly extensively and have seen it coming in fairly high in our profiling sessions. I did a search on the mailing list and found a discussion from 2005 on the performance of the library, results at that time showed a vector with boost::function being about 100 times faster than boost::signals. Our tests shows that this still very much holds true. I suspect there difference is considerably worse on in order RISC processors. I think it would be nice if either the manual states that performance isn't one of the design goals of boost::signals, or that the interface allows the application programmer greater controll over implementation details which affects performance. I saw in one discussion going ( although once again, an old one ) that boost::signals use list as the container of slots instead of for example vector. This is understandable for the general case since otherwise connecting / disconnecting slots would be very expensive on large collections. However one use case which I'd think is very very frequent ( which resembles ours ), is to have fairly few slots connected and a somewhat constant collection, in this case one would rather have the expensive connection management and instead have the better cache locality and invocation performance. Blocking / unblocking slots is another feature which while useful for a lot of people perhaps should be optional. I don't know exactly how blocking / unblocking slots are implemented, but perhaps simply an added iterator which doesn't respect the blocked status could be easily added and a matching slot invocation function.

4 15

Intel Compiler 11 and Boost 1.39 Bessel functions
by Matthieu Brucher 24 Jul '09

24 Jul '09

Hi, I've tried this code with Boost 1.39 (1.37 has the same behavior) and icpc 11.0.083: #include <iostream> #include <boost/math/special_functions/bessel.hpp> int main(int argv, char** argc) { std::cout << boost::math::cyl_bessel_i(0, 0) << std::endl; } With -g -03, this crashes with an internal error. The issue was reported to Intel (but if you have a solution, I'm all ears). Matthieu -- Information System Engineer, Ph.D. Website: http://matthieu-brucher.developpez.com/ Blogs: http://matt.eifelle.com and http://blog.developpez.com/?blog=92 LinkedIn: http://www.linkedin.com/in/matthieubrucher

3 10

Using boost library on MacOSx
by Richard L. Aurbach 24 Jul '09

24 Jul '09

On Jul 24, 2009, at 10:30 AM, boost-users-request(a)lists.boost.org wrote: > I have install boost library using this: > $ sudo port install boost > It seems download and compile fine on my local machine. > > But then i tried to compile a simple echo client example from > http://www.boost.org/doc/libs/1_35_0/doc/html/boost_asio/examples.html > > I get a bunch of compiler errors. I am using "g++ -o block_client > blocking_udp_echo_client.cpp " > > Here are some of the errors: > $ g++ -o block_client blocking_udp_echo_client.cpp > blocking_udp_echo_client.cpp:68:10: error: #include expects "FILENAME" > or <FILENAME> > blocking_udp_echo_client.cpp:69:10: error: #include expects "FILENAME" > or <FILENAME> > blocking_udp_echo_client.cpp:70:10: error: #include expects "FILENAME" > or <FILENAME> > blocking_udp_echo_client.cpp:71:10: error: #include expects "FILENAME" > or <FILENAME> > blocking_udp_echo_client.cpp:83: error: stray ‘\’ in program > blocking_udp_echo_client.cpp:108: error: stray ‘\’ in program > blocking_udp_echo_client.cpp:112: error: stray ‘\’ in program > > Thank you for any help. From my experience building software on MacOSX, I suspect that the problem is that you have not correctly defined an environment variable or something like that. If you write a line like "#include <boost/ blah>" and the compiler either cannot correctly resolve 'boost' or if the symbol resolves in such a way that an invalid file specification is created, then you might get the kind of error message that you are seeing. Another possibility -- if you have code left over from Windoze, look for backslashes in file specs. MacOSX is a Unix-like system that requires SLASHES, not BACKSLASHES. So lines line "#include <boost \header.h> will NOT work. Cheers, Rick Aurbach, Ph.D. President and Chief Engineer Aurbach & Associates, Inc. 8233 Tulane Avenue, Suite B St. Louis, MO 63132 www: http://www.aurbach.com/ eMail: support(a)aurbach.com [business] rick(a)aurbach.com [personal] Fax: 314/678-0869 Phone: 800/774-7239 314/726-1321 "Cowardice asks the question, 'Is it safe?' Expediency asks the question, 'Is it politic?' Vanity asks the question, 'Is it popular?' But, conscience asks the question, 'Is it right?' And there comes a time when one must take a position that is neither safe, nor politic, nor popular but one must take it because one's conscience tells one that it is right." -Martin Luther King, Jr. "If in the last few years you haven't discarded a major opinion or acquired a new one, check your pulse. You may be dead." - Gelett Burgess (1866-1951) "A life spent making mistakes is not only more honorable, but more useful than a life spent doing nothing." - George Bernard Shaw (1856-1950)

1 0

Re: [Boost-users] boost 1.39 serialization via base pointer ok on gcc, but crashes on AIX V10.1
by Avi Bahra 24 Jul '09

24 Jul '09

Ok first I hadn't realised my attachment was removed. So I include the source code below. This is small and self contained. o The compile error on AIX was removed because I saving via a non const variable. ( Note however gcc 4.2.1. on Linux it did not complain.) o To recap this compiles and runs on Linux with gcc 4.2.1 but crashes/exception on AIX V10.1. Because it reckons the derived/base relationship has not been registered. ... oserializer.hpp // convert pointer to more derived type. if this is thrown // it means that the base/derived relationship hasn't be registered vp = serialization::void_downcast( *true_type, *this_type, static_cast<const void *>(&t) ); if(NULL == vp){ boost::serialization::throw_exception( >>>> archive_exception(archive_exception::unregistered_cast) ); } Note if a save via the derived ptr, then it works. o If I explicitly register this relationship, (see code below) Then I get past the first exception only to get an assert. // since true_type is valid, and this only gets made if the // pointer oserializer object has been created, this should never // fail const basic_pointer_oserializer * bpos = archive_pointer_oserializer<Archive>::find(* true_type); >>> assert(NULL != bpos); if(NULL == bpos) boost::serialization::throw_exception( archive_exception(archive_exception::unregistered_class) ); ar.save_pointer(vp, bpos); o Initially I thought it was compiled without rtti on AIX. However this was not the case. Here is compile line. xlC -c -DDEBUG -qcpluscmt -qNOOPTimize -qnoinline -g -qfullpath -qfuncsect -qeh -qrtti -qtemplatedepth=700 -I"../SCRATCH/src" -I"/s1a/emos_esuite/emos_data/sms/boost_1_39_0" -o "bin/vacpp/debug/src/TestSerialisation.o" "src/TestSerialisation.cpp" This is show stopper bug that I must get fixed. Are there any more things I can try to debug this ? Any help would be much appreciated. //=============== the example ======================== #include <fstream> #include <assert.h> #include <boost/archive/text_iarchive.hpp> #include <boost/archive/text_oarchive.hpp> #include <boost/serialization/base_object.hpp> #include <boost/serialization/string.hpp> #include <boost/serialization/export.hpp> class RepeatBase { public: RepeatBase() {} virtual ~RepeatBase() {} virtual const std::string& name() const = 0; private: friend class boost::serialization::access; template<class Archive> void serialize(Archive & ar, const unsigned int version) {} }; class RepeatDerived : public RepeatBase { public: RepeatDerived( const std::string& name) : name_(name) {} RepeatDerived() {} virtual const std::string& name() const { return name_;} private: std::string name_; friend class boost::serialization::access; template<class Archive> void serialize(Archive & ar, const unsigned int version) { // save/load base class information ar & boost::serialization::base_object<RepeatBase>(*this); ar & name_; } }; class Defs { public: Defs(const std::string& f) : fileName_(f), repeat_(new RepeatDerived(f)) {} Defs() : repeat_(NULL) {} ~Defs() { delete repeat_;} bool operator==(const Defs& rhs) const { return fileName_ == rhs.fileName_;} const std::string& fileName() const { return fileName_;} private: std::string fileName_; RepeatBase* repeat_; friend class boost::serialization::access; template<class Archive> void serialize(Archive & ar, const unsigned int /*version*/) { ar & fileName_; ar & repeat_; } }; BOOST_CLASS_EXPORT(RepeatBase); BOOST_CLASS_EXPORT(RepeatDerived); BOOST_SERIALIZATION_ASSUME_ABSTRACT(RepeatBase) int main() { // With this explicit register, we get a bit further, but still crashes on AIX // boost::serialization::void_cast_register<RepeatDerived, RepeatBase>(0,0); const Defs saveDefs("saveFile.txt"); { // Save the defs file std::ofstream ofs( saveDefs.fileName().c_str() ); boost::archive::text_oarchive oa( ofs ); oa << saveDefs; // BOMBS out here on AIX V10.1 } { // Restore the defs file Defs loadDefs; std::ifstream ifs(saveDefs.fileName().c_str()); boost::archive::text_iarchive ia(ifs); ia >> loadDefs; assert( saveDefs == loadDefs ); } return 0; } //=============================================== Best regards, Ta, Avi

2 1

Problem with boost::interprocess:basic_string : Error address out of bounds
by samuel.gallard 24 Jul '09

24 Jul '09

Hello, I first present to you my code and I will explain later : ShmString.h : #include #include #include namespace ip=boost::interprocess; typedef ip::allocator CharAllocator; class ShmString : public ip::basic_string, CharAllocator > { public: ShmString (); virtual ~ShmString (); private: /** * The segment to build the string */ static ip::managed_shared_memory* st_segment; } This class served to have some string in memory. The following Element.h used it : #include "ShmString.h" class Element { public: Element (const Element& elem); Element (const std::string dir, const std::string file, const std::string type, const std::string newpath, const std::string newfile, ip::managed_shared_memory * segment); virtual ~Element (); private: ShmString dir; ShmString file; ShmString target; ShmString type; ShmString newpath; ShmString newfile; }; I have four attributes that declare it. When I tried to define all the attributes in the constructor like this in Element.cpp : Element::Element (const string dir, const string file, const string type, const string newpath, const string newfile, ip::managed_shared_memory *segment){ try{ this->segment = segment; //test the type if(type == Request::st_rename){ this->type.assign(type.c_str()); } else{ string res = "Class Element in constructor -> The type should be : rename "; throw EventException(res.c_str(), __LINE__ ); } this->dir.assign(dir.c_str()); this->file.assign(file.c_str()); this->target.assign(""); this->newfile.assign(newfile.c_str()); this->newpath.assign(newpath.c_str()); } catch(ip::interprocess_exception &e){ ostringstream oss; const std::string what(e.what()); oss << "Class Element in constructor 3 -> "; oss << what; throw EventException(oss.str().c_str(), __LINE__ ); } } If for example "const string dir " has the size more than 10 (the capacity by default for a ShmString object), I obtained an error like this : 0x0807439f in boost::interprocess::basic_string, boost::interprocess::allocator, 0u>, boost::interprocess::iset_index> > >::assign (this=0xb6c4e274, s=0xb8af42d0 ) at /usr/local/include/boost/interprocess/containers/string.hpp:988 #3 0x08071d26 in Element (this=0xb6c4e26c, elem=@0xb7fa224c) at ..Element.cpp:22 I tried to used some other constructors be default for basic_string but it remains the same. This code only works when in the constructors the string size are below 10. Could you someone explain me why I obtain this? Do I have some faulty code? Could you provide some examples on how store string with interprocess::basic_string in share memory for a size for more than 10 characters? I will be very grateful because I am lost... Thanks you in advance Regards Samuel -- View this message in context: http://www.nabble.com/Problem-with-boost%3A%3Ainterprocess%3Abasic_string-%… Sent from the Boost - Users mailing list archive at Nabble.com.

1 0

Alternative to bjam threading=multi
by Avi Bahra 24 Jul '09

24 Jul '09

On AIX I want to compile with multi-threading, then means using xlC_r. Using bjam threading=multi Will do this. However is there a way achieving the same effect without putting "threading=multi" on the command line ? i.e putting the threading model in site-config.jam In my site-config.jam , have tried the following, all to no avail *using* xlc : : xlC_r ; using vacpp : : <threading>multi ; using vacpp : xlC_r ; Best regards, Ta, Avi

2 1

[Asio] How can you detect port collsions?
by Robert Jones 24 Jul '09

24 Jul '09

Hi All Thanks to those of you who have answered my previous asio queries - I'm gradually gaining on the problems! I am allocating port numbers on tcp connections dynamically, and must allocate and reserve the port number without blocking. I also have multiple instances of the process which needs to do this, and I'm plagued by port collisions. How do I detect, and avoid, port number collsions? Thanks, Rob.

2 1