February 2007 - Boost-users - lists.preview.boost.org

[multi_array] operator= requires resize - why?
by Markus Werle 04 Jun '12

04 Jun '12

Hi! IMHO the behaviour of operator= for multi_array is a little bit broken. A lot of preconditions required: template <typename ConstMultiArray> multi_array_ref& operator=(const ConstMultiArray& other) { [...] // make sure the dimensions agree assert(other.num_dimensions() == this->num_dimensions()); assert(std::equal(other.shape(),other.shape()+this->num_dimensions(), this->shape())); Besides the fact that I get mad about asserts instead of exceptions (please change this to a way users may choose) why do we have such an odd behaviour here? >From page 1, line 3 of the docs I cite: "The interface design is in line with the precedent set by the C++ Standard Library containers" - this is not true for operator=, since std::<container>::operator= works fine for me all the time _without_ any resize. Could we please change the behaviour of multi_array::operator= to take care of resize where in need to? IMHO operator= should result in a true copy ignoring previous state. Markus

6 18

Design for boost::serialization of STL iterators.
by Carlo Wood 23 May '09

23 May '09

On Sat, Mar 11, 2006 at 11:45:36PM +0200, Peter Dimov wrote: > Carlo Wood wrote: > > > 1) WHY does boost::serialization not support serialization > > of iterators? > > It's very hard, if not impossible, in general. It is either impossible or possible. When it is possible, it can't be hard :p I think that at the moment of serialization, the actual container needs to be known. So, only concentrating on the syntax of the code that serializes an iterator, the following cannot work: ar & iter; However, the container will be known at that point (or at least, we might as well assume that). Therefore, I could imagine a syntax like: ar & foobar(container, iter); where 'foobar' is some template function (that will be part of boost::serialization in the future). Lets start with the last one (have to start somewhere). In order to deserialize the iterator (and taken into account that we already have the container) -- which makes me think that it might be better to pass a functor to operator& above. In other words, (at least for writing), use: template<class Container> struct Foobar { Foobar(Container const&, typename Container::const_iterator& iter) : M_container(container), M_iter(iter); private: Container const& M_container; Container::const_iterator& M_iter; }; and then assign to M_iter, whatever we find in M_container. > If you have access to the container to which the iterator i refers: > > a) if the container is a map, you can serialize i->first, then on > deserialization look up the key in the map using .find(); > > b) if the container is a sequence, and it has the same contents on > deserialization as it does on serialization, you can serialize the index of > the element - distance( c.begin(), i ). I don't think that it is a requirement that the whole container has to be read: either it's a map or set, in which case later insertions will not invalidate the container, or it is a vector, in which case we use an index, from which we can construct the end iterators before the whole container is reconstructed. Therefore, the following syntax can work imho: ar & FooBar(container, iter); Would you agree? There are a zillion questions and implementation details open - but I'd like to get anyones feedback about this type of interface for iterators before continuing. Current questions: What is a good name for Foobar? Am I right when I think that Foobar needs to be declared in boost::serialization? Now the hard part (for me) is that part that involves the internals of the boost library. At the moment one tries to serialize an iterator, it is possible (though not necessarily) that the object that the iterator points to is already serialized. In the case that we are dealing with an associative container (map or set etc), we don't want to store the contents of the object (or key part, in the case of a map) again: I'd like to just store that once, and store a reference in the archive at the other place. How can I make the library store an object only the first time and the store a reference the second time? This would be for an object of arbitrary type thus. I think that it is only feasible to do this when it's actually the same object (same memory address), which is the case; but while storing the object element of the container, the address of it isn't stored as well, is it? Is there a way to make: std::set<SomeData> s; [...] ar << s; Store the address of s (&s) along with the contents of s? And would that then automatically cause the library to not store that same object again when I do: std::set<SomeData>::iterator iter = s.find(...); [...] ar << *iter; Because then, &*iter would again be the same memory address as what was stored before. -- Carlo Wood <carlo(a)alinoe.com>

3 2

[BGL] citing the Boost Graph Library
by Alejandro Marcos Aragón 06 May '09

06 May '09

Can anyone point me how to cite the Boost Graph Library in a paper? Is there any information in the boost website? Thank you all, Alejandro Aragón

4 3

Boost Graph Library and Boehm Garbage Collector
by FBSL 08 Sep '08

08 Sep '08

Hello I am having trouble to garbage-collect adjacency_list<>. I have instanciated it with correctly garbage-collected vectors and lists (I have copied vecS and listS definitions, and added Boehm GC's default allocator so that they are garbage-collected). In my application I need to dynamically allocate many graphs, but it does not work, there is a (big) memory leak. Unfortunately, there is no template argument in adjacency_list<> to specify Boehm GC's allocator. Does anyone have a hint ? Snippet code "main.cpp" follows, compiled with Boost Graph Library 1.32, Boehm GC 6.4 and G++ 3.3.5, with command line : $ g++ -o main main.cpp -lgc -lgccpp -- #include <boost/graph/adjacency_list.hpp> #include <gc/gc_allocator.h> #include <gc/gc_cpp.h> #include <iostream> #include <vector> #include <list> using namespace std; using namespace boost; namespace boost { struct collected_vecS {}; struct collected_listS {}; template <class ValueType> struct container_gen<collected_vecS, ValueType> { typedef vector<ValueType,gc_allocator<ValueType> > type; }; template <class ValueType> struct container_gen<collected_listS, ValueType> { typedef list<ValueType,gc_allocator<ValueType> > type; }; template <> struct parallel_edge_traits<collected_vecS> { typedef allow_parallel_edge_tag type; }; template <> struct parallel_edge_traits<collected_listS> { typedef allow_parallel_edge_tag type; }; namespace detail { template <> struct is_random_access<collected_vecS> { enum { value = true }; typedef true_type type; }; } } typedef adjacency_list<collected_vecS, collected_vecS, directedS, no_property, no_property, no_property, collected_listS> graph; int main() { // leaks... while(true){ graph * g=new (UseGC) graph; for(unsigned int i=0; i<100; ++i){ add_vertex(*g); } for(unsigned int i=0; i<100; ++i){ for(unsigned int j=0; j<100; ++j){ add_edge(i,j,*g); } } } }

3 4

[statechart] history transitions make state-local-storage "un-cool"
by Mick Hollins 26 Jun '08

26 Jun '08

Apologies if this has been discussed before, but I couldn't find any mention of it: I am currently using the history facility of boost::fsm. I've discovered that when I re-enter a state, X, via a history transition I don't actually re-enter the same instance of X that I was in before, but instead enter a newly constructed instance of X. I just checked the UML spec regarding history transitions and it says that "Any necessary entry actions are performed", so given that boost::fsm uses constructors to represent entry actions I guess a new instance of X has to be constructed to ensure UML compliance. My actual concern is the effect this has on the "coolness" of state-local-storage (see http://boost-sandbox.sourceforge.net/libs/statechart/doc/faq.html#Whats_so_…) It seems to me that state-local-storage, which I agree is generally cool, is particularly un-cool (and bug-inducing) in the presence of history transitions. I'm not sure what a good alternative is, but just thought I'd raise the discussion. cheers, mick PS: does the history facility display the same semantics in boost::statechart? I plan to move to statechart real soon now ...

4 19

Re: [Boost-users] cross compiling boost for ARM
by Hughes, James 12 Aug '07

12 Aug '07

> -----Original Message----- > From: boost-users-bounces(a)lists.boost.org > [mailto:boost-users-bounces@lists.boost.org] On Behalf Of remi > Sent: 05 January 2007 14:44 > To: boost-users(a)lists.boost.org > Subject: [Boost-users] cross compiling boost for ARM > > > hi! > > I want to cross compile boost for an ARM processor. > For a pxa 270. but when i try to cross compile boost with > arm-linux-g++ , it dosen't work ... a proble with jam... > > everyone can help me? > > Thank you > > BEST REGARDS > > Rémi bjam "-sGCC_ROOT_DIRECTORY=/opt/montavista/mobilinux/devkit/arm/iwmmxt_le" "-sGCC=iwmmxt_le-gcc" "-sGXX=iwmmxt_le-g++" <location for libs> Obviously you would need to change the location namd names of the compile tools to whatever you are using. James This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

3 3

[Serialization] Problem serialization of derived classes
by Andreas Willich 09 Aug '07

09 Aug '07

Hi there! I have a problem with the code in the attachment. I followed the documentation and the examples, but I did not get the code to work. Gcc produces a lot of failures that something is already instantiated in header files of the serialization library. Has someone a idea what I am doing wrong? My gcc version is 4.1.1-r3 and I am working on a gentoo x86 box. Andreas Willich

4 5

[lambda][1.33.1] Lambda warnings after installing VS2005 SP1
by john.wismar＠autozone.com 01 Aug '07

01 Aug '07

I have just installed Service Pack 1 for VS2005, and am now getting a warning in some code using lambda::bind. There wasn't a warning previously, but I don't know if the issue is due to an update to the C++ standard library, a legitimate warning that they weren't flagging before, or a spurious warning. It looks like the issue is that I'm passing a function pointer, to bind. Is this a warning I should just ignore, or is this a legitimate issue? Thanks for your help! Here's a sample app, followed by the warnings I'm seeing. #include <boost/lambda/bind.hpp> using boost::lambda::bind; using boost::lambda::_1; #include <vector> #include <map> #include <algorithm> int main() { enum choice { select, reject }; std::vector<long> questions; std::map<long, choice> answers; std::transform(questions.begin(), questions.end(), std::inserter(answers, answers.begin()), bind(std::make_pair<long, choice>, _1, select)); return 0; } c:\boost\boost\lambda\detail\lambda_traits.hpp(389) : warning C4180: qualifier applied to function type has no meaning; ignored c:\boost\boost\lambda\detail\lambda_traits.hpp(458) : see reference to class template instantiation 'boost::lambda::detail::bind_traits<T>' being compiled with [ T=std::pair<long,main::choice> (long,main::choice) ] c:\temp\lambda_warning_test\lambda_warning_test.cpp(20) : see reference to class template instantiation 'boost::lambda::detail::bind_tuple_mapper<T0,T1,T2,T3,T4,T5,T6,T7,T8,T9>' being compiled with [ T0=std::pair<long,main::choice> (long,main::choice), T1=boost::lambda::placeholder1_type, T2=const main::choice, T3=boost::tuples::null_type, T4=boost::tuples::null_type, T5=boost::tuples::null_type, T6=boost::tuples::null_type, T7=boost::tuples::null_type, T8=boost::tuples::null_type, T9=boost::tuples::null_type ] -------------------------------- John Wismar john.wismar(a)autozone.com

2 1

BGL: INTERNAL COMPILER ERROR in VC7.1
by Yariv Tal 10 Jun '07

10 Jun '07

This one was already posted by Nicholas Burlett awhile back (see http://lists.boost.org/MailArchives/boost-users/msg06534.php), but I have some new info that may help. The problem: ========= When compiling code that uses the boost.graph library the VC7.1 compiler shouts: c:\boost_1_32_0\boost\mpl\aux_\preprocessed\plain\apply_wrap.hpp(48) : fatal error C1001: INTERNAL COMPILER ERROR As Nicholas already noted, this seems to be due to some compiler problem with the boost.graph out_edge_iterators since it is caused by the following lines in my code: (FilteredGraphGenerator::FilteredGraph is a typedef of a boost::filtered_graph) typedef boost::graph_traits<FilteredGraphGenerator::FilteredGraph> ::out_edge_iterator oedge_iterator; oedge_iterator edgesItr, edgesEnd; boost::tie(edgesItr, edgesEnd) = boost::out_edges(itr->first, m_g.m_filteredGraph); while (edgesItr != edgesEnd) { // do anything! } In fact, it seems to be related to the operator!= between iterators (if the while loop is commented out it compiles). How ever, the error persists even after changing the operator!= to operator== : while (edgesItr == edgesEnd) { // do anything! } ========================================================================== Some findings: =========== * We used to use boost_1_30_0 and the code used to compile PERFECTLY. The problem only appeared after migrating to boost_1_32_0. * Calling directly to the "equal" function in iterator_core_access instead of the operator== works. typedef boost::graph_traits<FilteredGraphGenerator::FilteredGraph> ::out_edge_iterator oedge_iterator; oedge_iterator edgesItr, edgesEnd; boost::tie(edgesItr, edgesEnd) = boost::out_edges(itr->first,m_g.m_filteredGraph); while (boost::iterator_core_access::equal(edgesItr, edgesEnd, boost::mpl::true_())) { // do somthing } * The error message location is at the mpl::apply_wrap2 function. Any relation to the mpl::apply2 function used for declaring the operator== in the BOOST_ITERATOR_FACADE_INTEROP_HEAD macro? Have these functions changed since v1.30.0?

9 8

[BGL-Python] __len__ and __iter__ for property maps
by George Sakkis 21 May '07

21 May '07

I'm trying to build BGL-Python from SVN. I managed to build it successfully on Windows (VC 8.0) but I'm having problems with gcc 3.4 on Linux; although it does compile, it doesn't expose in Python two property map methods, __len__ and __iter__. I think I narrowed it down to the non-selection of a template specialization: // boost/graph/python/property_map.hpp namespace boost { namespace graph { namespace python { namespace detail { / * skip other stuff */ template<typename Class, typename T, typename IndexMap> void property_map_extras(Class& pm, type<vector_property_map<T, IndexMap> >) { pm.def("__len__", &py_vector_property_map_length<T, IndexMap>); typedef typename std::vector<T>::iterator value_iterator; simple_python_iterator<value_iterator>::declare("ValueIterator"); pm.def("__iter__", &py_vector_property_map_values<T, IndexMap>); } template<typename Class, typename PropertyMap> inline void property_map_extras(Class&, type<PropertyMap>) { } } // end namespace detail */ So for __len__ and __iter__ to be included, the first overloading of property_map_extras must be called. That's what happens with VC 8.0 (in fact I can remove the second empty function and compiles just fine), but gcc selects the second one. Can anyone help and/or reproduce it ? Thanks, George

2 1