December 2006 - Boost-users - lists.preview.boost.org

[regex] - merging scanners
by Frank Bergemann 05 Dec '06

05 Dec '06

Hi, is there a way to define a set (list) of regular expressions and merge them into *one* "scanner". So that i can pass some input string to this merged scanner ( with a _single_ function call ) and as a result get back which of the regular expression(s) match for that string (two modes:(1) 1st hit & (2) all hits)? Currently i use a loop to check for each expression individually/sequentially. \Frank

1 0

Another sub_range problem
by abir basak 05 Dec '06

05 Dec '06

Hi, I am facing some more range problem from boost::range; According to the CVS RC_1_34 works. Revision 1.21 version specified by Thorsten Ottosen , most of the classes work. What is my interest is to have a get_range function inside some of the container class like std::vector and boost::circular_buffer (from boost CVS) Here I have test class to show the problem I am facing. First, when I inherit from a vector , and specify a range function just like iterator functions ( begin() and end() ) template<typename T> class range_vector : public std::vector<T>{ public: typedef boost::sub_range<range_vector> range; typedef boost::sub_range<const range_vector> const_range; range get_range(size_type from,size_type to){ std::cout<<"range"<<std::endl; return range(begin()+from,begin()+to); } const_range get_range(size_type from,size_type to)const{ std::cout<<"const range"<<std::endl; return const_range(begin()+from,begin()+to); } }; int main(){ range_vector<int> v; int x[] = {0,1,2,3,4,5,6,7,8}; v.insert(v.end(),x,x+9); std::copy(v.begin(),v.end(),std::ostream_iterator<int>(std::cout," ")); std::cout<<std::endl; range_vector<int>::range r = v.get_range(1,5); r[0] = 100; copy(r.begin(),r.end(),std::ostream_iterator<int>(std::cout," ")); std::cout<<std::endl; range_vector<int>::const_range cr = v.get_range(1,5); copy(cr.begin(),cr.end(),std::ostream_iterator<int>(std::cout," ")); std::cout<<std::endl; const range_vector<int>& cv = v; range_vector<int>::const_range cr1 = cv.get_range(1,5); copy(cr.begin(),cr.end(),std::ostream_iterator<int>(std::cout," ")); std::cout<<std::endl; } This code compiles perfectly and gives result as expected. It also works with deque . However when I compile the same code for boost::circular_buffer,i.e template<typename T> class range_vector : public boost::circular_buffer<T>{ public: typedef boost::sub_range<range_vector> range; typedef boost::sub_range<const range_vector> const_range; range get_range(size_type from,size_type to){ std::cout<<"range"<<std::endl; return range(begin()+from,begin()+to); } const_range get_range(size_type from,size_type to)const{ std::cout<<"const range"<<std::endl; return const_range(begin()+from,begin()+to); } }; It has a same interface that of a vector, it fails to compile when I call the non-const get_range function. i.e //Initialized the circular_buffer with a few elements. range_vector<int> v; int x[] = {0,1,2,3,4,5,6,7,8}; v.insert(v.end(),x,x+9); std::copy(v.begin(),v.end(),std::ostream_iterator<int>(std::cout," ")); std::cout<<std::endl; ///got a const reference and invoking const version of get_range. works fine. const range_vector<int>& cv = v; range_vector<int>::const_range cr1 = cv.get_range(1,5); copy(cr1.begin(),cr1.end(),std::ostream_iterator<int>(std::cout," ")); std::cout<<std::endl; ///now trying to get a non-const version range_vector<int>::range r = v.get_range(1,5); Here it gives error in Visual Studio e:\boost_1_33_1\boost\range\iterator_range.hpp(60): error C2440: 'type cast' : cannot convert from 'boost::range_iterator<C>::type' to 'boost::range_iterator<C>::type' with [ C=const boost::sub_range<range_vector<int>> ] and [ C=range_vector<int> ] ///now trying to get a non-version and assign it to const version range_vector<int>::const_range r = v.get_range(1,5); It gives the same error. Here C (container) is passed as correct one. begin() and end() are too executes correct version (non-const one). Not getting why it won't work. Any kind of help is highly appreciated. Thanks to boost community in advance. abir basak -- Abir Basak, Member IEEE Software Engineer, Read Ink Technologies B. Tech, IIT Kharagpur email: abir(a)abirbasak.com homepage: www.abirbasak.com

3 4

[tuple] get not compiling with gcc 3.2.3
by Mark Ruzon 05 Dec '06

05 Dec '06

The documentation for tuple says there are no portability problems with gcc 2.95. I am using 3.2.3 and am getting a syntax error on the line that does the work of this function object: #include <boost/tuple/tuple.hpp> struct get_0_func { template <typename II> // II models Input Iterator on tuple void operator()(II it) { it->get<0>(); } }; The boost::get<0>(*it) form works fine. Does anyone know why a newer version of gcc would not compile this? Mark

2 1

Why BOOST_CURRENT_FUNCTION not in docs?
by Pavel Syomin 04 Dec '06

04 Dec '06

Hi all! Why BOOST_CURRENT_FUNCTION not in docs? Is it a part of API or not?

3 6

functional/hash: hash_value with context
by Boris Mansencal 04 Dec '06

04 Dec '06

Hi, A newbie question regarding functional/hash. I would like to use TR1 unordered_map for a 2D point custom data type. For this, I use hash_value from Boost. But I would like to give/pass a context to this function : here, width & height of domain in which are my 2D points. Currently, I declare theses width and height static. My code (in my cpp file) looks like : static int P_width; static int P_height; std::size_t hash_value(point const& p) { return ((size_t)p.x()<<1)*P_width + (size_t)(p.y()<<1); } But this solution is not satisfactory as I can not have several instances of my class including the unordered_map, i.e., several domains of different width & height. Is there a straightforward solution that I have overlooked ? Regards, Boris.

3 6

[License] OSI certification progress
by Ole Christian Weidner 04 Dec '06

04 Dec '06

Hi, I just read through the Boost License page at http:// www.crystalclearsoftware.com/cgi-bin/boost_wiki/wiki.pl? Boost_License. It states that an OSI license approval process has been initiated in January 2005 - now I'm curious about the status quo, since I can't find any further information on this effort... It would be much easier to release software under the Boost License if one could directly refer to OSI compliance since they seem to be well known and have a broad acceptance. Does anyone have any information on this topic? Thanks a lot! Cheers, Ole

1 0

Re: [Boost-users] Boost-users Digest, Vol 1106, Issue 1
by craigp 04 Dec '06

04 Dec '06

> Message: 7 > Date: 02 Dec 2006 17:51:00 -0600 > From: Aleksey Gurtovoy <agurtovoy(a)meta-comm.com> > Subject: Re: [Boost-users] odd msvc 7.1 compilation errors with mpl > To: boost-users(a)lists.boost.org > Cc: dave(a)boost-consulting.com, craigp <craigp98072(a)yahoo.com> > Message-ID: <m2y7pp3li3.fsf(a)meta-comm.com> > Content-Type: text/plain; charset=us-ascii > > craigp writes: > > For some reason, I can't get the IDE to compile BOOST_MPL_ASSERT. I tried <snip> > This is a known issue: the errors you see are specific to MSVC "Edit & > Continue" mode, in which the __LINE__ macro (used internally in MPL > asserts) stops being a preprosessing-time constant and becomes a > reference to a global run-time variable > (http://support.microsoft.com/kb/199057). > > To alleviate this problem, Microsoft has introduced a proprietary > predefined macro __COUNTER__ > (http://msdn2.microsoft.com/en-us/library/b0084kay.aspx), intended to > serve as a replacement for __LINE__ in situations where the latter is > used to generate a unique identifier rather than to actually refer to > a line number (which is the case with MPL asserts). Unfortunately, > because __COUNTER__ is incremented every time it's used, fixing this > is a bit more complicated then just a search & replace for __LINE__, > and therefore it has to wait for 1.35 (or you can grab the latest > version of "boost/mpl/assert.hpp" from Boost CVS's HEAD trunk). > > HTH, > -- > Aleksey Gurtovoy > MetaCommunications Engineering thanks Aleksey!! works fine now. cheers, --craig ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com

2 1

Re: [Boost-users] circular_buffer doc
by Pfligersdorffer, Christian 04 Dec '06

04 Dec '06

http://boost.cvs.sourceforge.net/*checkout*/boost-sandbox/boost-sandbox/lib… Under the above link you should find the documentation. Greetings, -- Christian Pfligersdorffer Dipl.-Ing. Bakk.rer.nat. Software Engineering EOS GmbH - Electro Optical Systems Robert-Stirling-Ring 1 D-82152 Krailling / Munich Phone +49 89 893 36-229 Fax +49 89 893 36-287 christian.pfligersdorffer(a)eos.info http://www.eos.info

1 0

odd msvc 7.1 compilation errors with mpl
by craigp 02 Dec '06

02 Dec '06

For some reason, I can't get the IDE to compile BOOST_MPL_ASSERT. I tried this: #include <boost/type_traits/is_same.hpp> #include <boost/mpl/assert.hpp> int main() { BOOST_MPL_ASSERT(( boost::is_same< char, char > )); } and it gives the following errors: d:\dev\boost.cvs\boost\libs\fusion\example\extension\test_example.cpp(31) : error C2143: syntax error : missing ';' before '=' d:\dev\boost.cvs\boost\libs\fusion\example\extension\test_example.cpp(31) : error C2143: syntax error : missing ';' before '=' what's even stranger is that i copied/pasted the pre-processed file, and that compiled just fine: static const std::size_t mpl_assertion_in_line_26 = sizeof( boost::mpl::assertion_failed<false>( boost::mpl::assert_arg( (void (*) ( boost::is_same< char, char > ))0, 1 ) ) ); anyone else seen something like this before?? all the mpl regression tests compile fine via bjam (using msvc 7.1), so it appears ide-specific, somehow... thanks, --craig ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com

3 2

Can't build Boost on Windows
by Ronald Levine 02 Dec '06

02 Dec '06

This is my second attempt to post this problem without having seen it on the list. and I'm really desperate for some help on this. Having moved to my new Compaq Presario V6000 ( AMD Turion 64 X2), with Windows XP Media Center Edition, as my ONLY Windows machine, I find that I can't build Boost on it, so all of my Windows C++ development is stalled. Following the simple instructions, produces the following output, and abortion. HELP! C:\kits\boost_1_33_1>bjam "-sTOOLS=vc-8_0" install ****************************************************** Building Boost.Iostreams with bzip2 support disabled. To enable bzip2, consult the Boost.Iostreams documentation ****************************************************** ****************************************************** Building Boost.Iostreams with zlib and gzip support disabled. To enable zlib and gzip, consult the Boost.Iostreams documentation ****************************************************** Building Boost.Regex with the optional Unicode/ICU support disabled. Please refer to the Boost.Regex documentation for more information (and if you don't know what ICU is then you probably don't need it). ...patience... ...patience... ...found 13371 targets... ...updating 4941 targets... MkDir1 C:\Boost spawn: Invalid argument

3 3