April 2003 - Boost-users - lists.preview.boost.org

regexp match question
by Simon Brown 01 May '03

01 May '03

Hi All, Here's a question I can't answer. I'm using regexp to dig out strings from data received via Ham Radio, so the txt often is corrupted. What I want to match is two consecutive callsigns separated by whitespace, for example 'hb9drv hb9drv' but not 'hb9drv hb9drX'. I can define the match condition for a callsign, but can I use the match option {2,3} somehow to match the same callsign two or three times? Effectively match the same word two or three times? Help received with much thanks, Simon Brown, Casa Bergenia, CH-7031 Laax www.hb9drv.ch [Non-text portions of this message have been removed]

3 5

Licence terms
by Ben Hutchings 30 Apr '03

30 Apr '03

Where should I post to ask questions and make suggestions about licence terms for Boost libraries? I am specifically concerned about the large number of slightly different wordings of some of the licences, which I think would all have to be included in documentation of a program using the covered libraries.

1 0

RE: [Boost-Users] const shared_ptr<>
by Tom Matelich 30 Apr '03

30 Apr '03

> From: Hossein Haeri [mailto:powerprogman@yahoo.com] > Sent: Wednesday, April 30, 2003 8:29 AM > > I want to know what the following means: > > int a = 5; > const boost::shared_ptr<int> sp(&a); > I assume you know this, but this code is in error. When the last shared_ptr referencing &a goes away, it will try to delete a, which is illegal. There is a workaround defined at http://www.boost.org/libs/smart_ptr/sp_techniques.html#static , though. ----------------------------------------------------------------------- DISCLAIMER: Information contained in this message and/or attachment(s) may contain confidential information of Zetec, Inc. If you have received this transmission in error, please notify the sender by return email. -----------------------------------------------------------------------

1 0

ptime and time_duration
by Andre du Toit 30 Apr '03

30 Apr '03

Hi. Since time_duration uses <long> to represent each of the fields (H:M:S:FS), I should be able to add any hour offset to a ptime, as long as the resultant ptime is inside the date/time range representable by boost? With the date ranges of boost being 1400-Jan-1 00:00:00 -> 10000-Jan-1 00:00:00, the number of hours between these dates is (very roughly!) 7.534E7. This is less than the <long> limit on my system, which is +/- 2.147E9. That is good. So; doing the following: ptime t_max( date(10000,Jan,1) ); ptime t_min( date(1400,Jan,1) ); time_duration td = t_max - t_min; std::cout << to_simple_string( td ) << std::endl; should produce something like : 7.534E7:0:0 or if you want to write it out: 7533600:0:0 not? Instead; the output I get is : 224112:19:12. This corresponds to a timespan of roughly 25 years which means I just ran into some overflow/underflow problem somewhere. What gives? What time range is supported by time_duration if it does not use the <long> limits? I have difficulty deducing this information from the header files, the source for the lib is not too helpfull either! What am I missing here? Greetings, Andre.

2 1

running regression tests
by Vaclav Vesely 30 Apr '03

30 Apr '03

It's possible to execute all regression tests so it's possible to execute one test suite: bjam test or bjam filesystem But it's impossible to execute several (but not all) test suits at once: bjam config filesystem Only the last (filesystem) suit is executed. It's possible to improve testing.jam to allow it? Can someone give a bit of advice? Thanks and regards, w

4 5

Re: Re: running regression tests
by Dave Abrahams 30 Apr '03

30 Apr '03

Peter Dimov wrote: > David Abrahams wrote: >> BTW, Vaclav, the place to post about Boost.Build issues is >> jamboost(a)yahoogroups.com. >> >> http://groups.yahoo.com/group/jamboost/ > > ... and the place to announce mailing lists is > > http://www.boost.org/more/mailing_lists.htm Updated.

1 0

boost::spirit multiline comment parsing - how?
by Markus Werle 30 Apr '03

30 Apr '03

Hi! While playing around with the examples of the spirit library I feel like I missed some essential points. The far goal I have is to parse a file containing C/C++ comments and assignments of the form name = value; where I drop the comments and store the assignments in a map<string, string>. If You have done something similar, please share Your knowledge with the rest of us. Below is a modifed version of comments.cpp. Here I only try to output any comment found while dropping the other stuff. Why does the parser drop stuff after the 1st assignment? the output of the code is Parsed C-comment successfully! Matched (27) characters: "//test2 /* test1 */// test Any help appreciated. Also I would like not to gather all commenst in one string ... -------- #include "boost/spirit.hpp" #include <iterator> #include <string> #include <iostream> #include <cassert> #include <fstream> #include <map> #include <cassert> /////////////////////////////////////////////////////////////////////////////// // actor called after successfully matching a single character class actor_string { public: actor_string(std::string &rstr) : matched(rstr) { } void operator() (const char *pbegin, const char *pend) const { matched += std::string(pbegin, pend-pbegin); } private: std::string &matched; }; /////////////////////////////////////////////////////////////////////////////// // actor called after successfully matching a C++-comment void actor_cpp (const char *pfirst, const char *plast) { std::cerr << "Parsing C++-comment" << std::endl; std::cerr << "Matched (" << plast-pfirst << ") characters: "; char cbbuffer[128]; strncpy(cbbuffer, pfirst, plast-pfirst); cbbuffer[plast-pfirst] = '\0'; std::cerr << "\"" << cbbuffer << "\"" << std::endl; } /////////////////////////////////////////////////////////////////////////////// // main entry point int main () { using namespace boost::spirit; ///////////////////////////////////////////////////////////////////////////// char const* pCComment = "//test2\n/* test1 */\n\n// test\nalpha = 3.0;\n\n// beta is soo important\nbeta=5.6;\n\n/* \n\nSometimes comments are\ngood since\nbeta = 4.5;\nis a good choice, too\n\n*/"; typedef skipper_iteration_policy<> iter_policy_t; typedef scanner_policies<iter_policy_t> scanner_policies_t; typedef scanner<char const*, scanner_policies_t> phrase_scanner_t; rule<phrase_scanner_t> cpp_comment, ignored, all; cpp_comment = comment_p("/*", "*/") // rule for C-comments | comment_p("//") // rule for C++ comments ; std::string comment_c; all = ( *cpp_comment[actor_string(comment_c)] | *anychar_p ) ; ignored = (space_p | chlit<char>('\n')); parse_info<> result; result = parse (pCComment, all, space_p); if (result.hit) { std::cerr << "Parsed C-comment successfully!" << std::endl; std::cerr << "Matched (" << comment_c.size() << ") characters: "; std::cerr << "\"" << comment_c << "\"" << std::endl; } else { std::cerr << "Failed to parse C/C++-comment!" << std::endl; } std::cerr << std::endl; } Markus -- Compile time analytic differentiation? Yes, at http://daixtrose.sourceforge.net/

2 1

bjam, targets from another projects
by Vaclav Vesely 30 Apr '03

30 Apr '03

Hi, It's possible to specify dependency on a target from another project tree? I want to write to my project's "Jamfile" something like this: --- Jamfile --- exe test : test.cpp <dll>$(BOOST_ROOT)/libs/threads/build/boost_thread : <include>$(BOOST_ROOT) ; --- Thanks and regards, w

2 1

bjam - several projects and ALL_LOCATE_TARGET
by Vaclav Vesely 30 Apr '03

30 Apr '03

Hi, I would like to ask for help with using bjam. I want to have more project directory trees, for example: C:\src\boost C:\src\my_projects\first C:\src\my_projects\first and I want to compile binaries to separate directories: C:\build\boost C:\build\my_projects\first C:\build\my_projects\second So I have to set different values of the ALL_LOCATE_TARGET environment variable for each project. It's unconfortable to set that value each time I want to inovoke the bjam, so I want to set it in the Jamfile of each project. I mean somethin like this: --- C:\src\my_first_project\Jamfile --- project-root ; ALL_LOCATE_TARGET = C:\build\my_projects\first --- Of course, this doesn't work. Can someone propose the solustion? BTW it would be handy to use the "project-root" directive for this reason: --- C:\src\my_first_project\Jamfile --- project-root my_projects/first ; --- The specified path is ment as relative to the ALL_LOCATE_TARGET. Thanks and regards, w

2 1

tokenizer: finding the last element. is it possible?
by Vincent LaBella 29 Apr '03

29 Apr '03

Hello, I'm using boost::tokenizer and want to goto the last token in the sequence, so I tried Tok::iterator last = tok.end(); last--; // error decrement not defined last = tok.begin(); advance(last,tok.size()-1); // error size() not defined. Is it possible to add decrement or a back() reference to tokenizer? Thanks Vince

3 4